6 layers64 × 58 mm
6 layers50 × 50 mm
SolarCell+Y
spacecraft-design-lab-2019/documentation12Wiki lives in here
- Size
- 50 × 50 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 32
- Pads
- 148
- Tracks, vias
- 1,064, 49
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Sep 2019
- Updated
- 11 Jun 2020
Overview
SolarCell+Y is an open-source printed circuit board by spacecraft-design-lab-2019, from the spacecraft-design-lab-2019/documentation repository on GitHub. It is a 6-layer board of 50 × 50 mm with 57 parts on 32 nets, routed with 1,064 tracks and 49 vias.
It is built around the HHM17139B2, SDM20U40-7-FS and U.FL-R-SMT-1, with the XF2M-1015-1A among its other parts. Its parts include 20 resistors, 14 capacitors, 5 diodes, 3 ICs and 2 connectors.
Main components
4
HHM17139B2
SMD-6P,0.8x1.6mmSMD-6P,0.8x1.6mm Balun ROHSTDKBalun
SDM20U40-7-FS
SOD-523SOD-523 Schottky Diodes ROHSFUXINSEMISchottky Diodes
U.FL-R-SMT-1
Up to 6GHz Ultra Small Surface Mount Male Coaxial Connectors U.FL SeriesHirose ElectricUncategorised
XF2M-1015-1A
SMD,P=0.5mm,卧贴-30℃~+85℃ 0.3mm 0.5mm 10P 2.1mm Copper alloy Double-Sided Contacts, Top and Bottom Entry Gold Surface Mount, Right Angle SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSOmronFFC, FPC (Flat Flexible) Connector Assemblies
README
README.mddocumentation
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0 | Resistor_SMD:R_0402_1005Metric | R1, R1, R2, R2, R3, R4, R4, R14, R15, R16, R17, R18, R19 |
| 8 | SolarCell_Small | SolarCellParts:KXOB25-05X3F | SC1, SC2, SC3, SC4, SC5, SC6, SC7, SC8 |
| 5 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C5, C9, C10, C13 |
| 4 | 100uF | Capacitor_SMD:C_0603_1608Metric | C6, C11, C12, C14 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C3, C8 |
| 2 | 8.25M | Resistor_SMD:R_0402_1005Metric | R8, R10 |
| 2 | MSS1P4-M3_89A | custom-footprints:MICROSMP | D2, D3 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2 |
| 2 | SBDiode | SolarCellParts:SB Diode | D1, D2 |
| 1 | 1.0uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 10uH-LPS4018-103MR | misc-circuits:LPS4018 | L2 |
| 1 | 22uF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 22uH-LPS4018-223MR | misc-circuits:LPS4018 | L1 |
| 1 | 374K | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 4.53M | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 4.75M | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 5.62M | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 7.32M | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | BQ25570 | misc-circuits:QFN50P350X350X100-21N-D | U2 |
| 1 | HHM17139B2 | custom-footprints:balun0603 | U1 |
| 1 | SDM20U40-7 | misc-circuits:SOD523 | D1 |
| 1 | U.FL-R-SMT-1 | custom-footprints:U.FL-R-SMT-1 | J2 |
| 1 | Val** | custom-footprints:ypanel | Ref** |
| 1 | XF2M-1015-1A | custom-footprints:XF2M-1015-1A | J1 |
| 1 | symbols_TSL2561 | custom-footprints:TSL2561 | IC1 |
More from spacecraft-design-lab-2019/documentation
3- 6 layers48.4 × 48.4 mm
- 6 layers50 × 50 mm
Similar boards
- 6 layers64 × 58 mm
- 4 layers44.4 × 35.8 mm
Avionics motherboard
spacecraft-design-lab-2019/avionics-motherboard
Main flight computer board for the PyCubed-1 spacecraft
76 parts - 6 layers50 × 50 mm
- 2 layers47.2 × 35 mm
- 4 layers128 × 79 mm
- 4 layers21 × 17.8 mm
- 6 layers
Misc circuits
spacecraft-design-lab-2019/solar-misc-circuits
Circuit "blocks" for the energy harvesting, burn wire, photosensor, and FPC connector circuits
40 parts - 4 layers35.8 × 44.4 mm
Questions
How big is the SolarCell+Y PCB?
It measures 50 × 50 mm and has 6 copper layers, 1.6 mm thick.
What parts does the SolarCell+Y use?
57 parts, built around the HHM17139B2, SDM20U40-7-FS, U.FL-R-SMT-1 and XF2M-1015-1A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SolarCell+Y KiCad files?
From the spacecraft-design-lab-2019/documentation repository on GitHub, at the commit this page was made from: the board is Solar_Actuators/Solar Panels Rev1/Solar Cell Y/+Y/v3_SolarCellX/SolarCell+Y.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SolarCell+Y design in my own project?
Its repository states no licence, so its author keeps all rights: ask spacecraft-design-lab-2019 before reusing the design.