
Solar Panel Z-
PyCubed-Mini/avionics-solarpanels
Solar panel boards for the PyCubed-Mini PocketQube platform

SolarCell+Y is an open-source printed circuit board by spacecraft-design-lab-2019, from the spacecraft-design-lab-2019/Solar-Panel-plus-Y repository on GitHub. It is a 6-layer board of 50 × 50 mm with 73 parts on 34 nets, routed with 1,898 tracks and 42 vias.
It is built around the TSL2561T, NDS8434 and IRLML2803, with the SDM20U40-7-FS and U.FL-R-SMT-1 among its other parts. Its parts include 22 resistors, 14 capacitors, 5 diodes, 4 ICs and 2 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R8, R9, R10, R13, R14, R20, R21, R25 |
| 8 | SolarCell_Small | custom-footprints:KXOB25-05X3F | SC1, SC2, SC3, SC4, SC5, SC6, SC7, SC8 |
| 5 | TP | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C4, C9, C10, C15 |
| 4 | 100uF | Capacitor_SMD:C_0603_1608Metric | C6, C11, C12, C14 |
| 2 | 1M | Resistor_SMD:R_0402_1005Metric | R5, R7 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C3, C8 |
| 2 | 8.25M | Resistor_SMD:R_0402_1005Metric | R12, R18 |
| 2 | MSS1P4-M3_89A | custom-footprints:MICROSMP | D3, D4 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2 |
| 2 | SBDiode | SolarCellParts:SB Diode | D1, D2 |
| 1 | 1.0uF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 10uH-LPS4018-103MR | misc-circuits:LPS4018 | L2 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 22uF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 22uH-LPS4018-223MR | misc-circuits:LPS4018 | L1 |
| 1 | 374K | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 4.53M | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 4.75M | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 4.7k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 5.62M | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 7.32M | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | IRLML2803 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Jumper | custom-footprints:Burn-Wire | JP1 |
| 1 | NDS8434 | custom-footprints:NDS8434 | U2 |
| 1 | SDM20U40-7 | misc-circuits:SOD523 | D5 |
| 1 | TSL2561 | custom-footprints:TSL2561 | U3 |
| 1 | TTB12G51-Balun | custom-footprints:TTB12G51-balun | U1 |
| 1 | U.FL-R-SMT-1 | custom-footprints:U.FL-R-SMT-1 | J2 |
| 1 | Val** | custom-footprints:ypanel | Ref** |
| 1 | Value | misc-circuits:QFN50P350X350X100-21N-D | U4 |
| 1 | symbols_XF2M-1015-1A | custom-footprints:XF2M-1015-1A | J1 |
The 67 most common of 73 parts.

PyCubed-Mini/avionics-solarpanels
Solar panel boards for the PyCubed-Mini PocketQube platform

spacecraft-design-lab-2019/solar-misc-circuits
Circuit "blocks" for the energy harvesting, burn wire, photosensor, and FPC connector circuits




proveskit/battery_board
The battery and power management board for the PROVES Kit.

alxklso/ISP-cubesat
This is the repo for the Isomer Space Program (ISP) 1U CoyoteSat CubeSat mission.

proveskit/development_boards
Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.
It measures 50 × 50 mm and has 6 copper layers, 1.6 mm thick.
73 parts, built around the TSL2561T, NDS8434, IRLML2803 and SDM20U40-7-FS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the spacecraft-design-lab-2019/Solar-Panel-plus-Y repository on GitHub, at the commit this page was made from: the board is SolarCell+Y.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask spacecraft-design-lab-2019 before reusing the design.