

Modified version of the OpenMV camera module
- Size
- 35.8 × 44.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 117
- Pads
- 309
- Tracks, vias
- 698, 139
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Oct 2019
- Updated
- 3 Mar 2020
Overview
Base is an open-source printed circuit board by spacecraft-design-lab-2019, from the spacecraft-design-lab-2019/OpenMV_Camera repository on GitHub. It is a 4-layer board of 35.8 × 44.4 mm with 58 parts on 117 nets, routed with 698 tracks and 139 vias.
It is built around the STM32H743VIT6, PAM2305AABADJ and MPZ1608S181ATAH0, with the VSMY12850, BSS138 and SI2301BDS among its other parts. Its parts include 26 capacitors, 9 resistors, 4 ICs, 4 diodes and 3 inductors. It belongs with the STM32 boards of this library.
Main components
7STM32H743VIT6
LQFP-100(14x14)-40℃~+85℃ 1.71V~3.6V 12bit 16bit 1MB 2MB 32 Bit 480MHz 82 ARM Cortex-M7 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)PAM2305AABADJ
TSOT-25-40℃~+85℃ 1 1.5MHz 1A 2.5V~5.5V 40uA 600mV~5.5V Adjustable Buck Buck Built-in Yes TSOT-25 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersMPZ1608S181ATAH0
0603-55℃~+125℃ 1 180Ω@100MHz 2A 50mΩ ±25% 0603 Ferrite Beads ROHSTDKFerrite BeadsVSMY12850
1206-40℃~+85℃ 1.4V、1.65V、2.9V 140mW 16mW/sr@IF=70mA 35nm 40° 5V 70mA 850nm 1206 Infrared LED Emitters ROHSVishay IntertechnologyInfrared LED EmittersBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsSI2301BDS
SOT-23SOT-23 MOSFETs ROHSTECH PUBLICMOSFETsXF2M-1015-1A
SMD,P=0.5mm,卧贴-30℃~+85℃ 0.3mm 0.5mm 10P 2.1mm Copper alloy Double-Sided Contacts, Top and Bottom Entry Gold Surface Mount, Right Angle SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSOmronFFC, FPC (Flat Flexible) Connector Assemblies
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | base:0603-CAP | C5, C6, C7, C8, C9, C10, C13 |
| 4 | 0.1uF | openmv3:0603-CAP | C15, C16, C17, C19 |
| 3 | 0 | base:0603-RES | R4, R6, R7 |
| 3 | 10K | base:0603-RES | R2, R3, R9 |
| 2 | 10K | base:EXBV8V | RN2, RN3 |
| 2 | 10uF | base:0805 | C3, C22 |
| 2 | 12pF | base:0603-CAP | C40, C41 |
| 2 | 1uF | base:0603-CAP | C1, C4 |
| 2 | 2.2uF | base:0603-CAP | C48, C49 |
| 2 | 22uF | base:0805 | C2, C44 |
| 2 | 4.7K | openmv3:EXBV4V | RN4A1, RN4B1 |
| 2 | 47uF | base:EIA3216 | C11, C21 |
| 2 | MPZ1608S181ATAH0 | base:0603 | L1, L2 |
| 2 | VSMY12850 | base:LED-1206 | LED2, LED3 |
| 1 | 100K | base:0603-RES | R5 |
| 1 | 10R | base:0603-RES | R1 |
| 1 | 220R | base:EXBV8V | RN1 |
| 1 | 22uF | openmv3:0805 | C20 |
| 1 | 4.7uF | base:0603-CAP | C18 |
| 1 | 4.7uH/1.4A | base:1007 | L3 |
| 1 | 453K | base:0603-RES | R10 |
| 1 | 47uF | openmv3:EIA3216 | C12 |
| 1 | 7S-12.000MAHE-T | base:CRYSTAL-2.5X2.0 | Y1 |
| 1 | BSS138 | base:SOT23-3 | Q1 |
| 1 | LED-TRICOLOR | base:LED-TRICOLOR-SMD-MF | LED1 |
| 1 | MF-CON-MICROUSB-RIGHT | base:MICROUSB-RIGHT | USB |
| 1 | OV7725 | openmv3:CSP2-28 | U2 |
| 1 | PAM2305AABADJ | base:TSOT25 | U8 |
| 1 | PINHD-1X6 | base:1X06 | JP3 |
| 1 | SDM2U20SD3-7 | base:SOD-323 | D3 |
| 1 | STM32H743VIT6 | base:LQFP100 | U1 |
| 1 | Si2301BDS | base:SOT23-3 | Q2 |
| 1 | TPS731XX | base:SOT23-5 | U5 |
| 1 | USD-1040310811 | base:1040310811 | X2 |
| 1 | XF2M-1015-1A | base:XF2M-1015-1A | J5 |
More from spacecraft-design-lab-2019/OpenMV_Camera
3Similar boards
- 2 layers25 × 50 mm

BatteryModule
DavidMolTor/BatteryModule
Battery module with independent overdischarge control and voltage regulations stages.
47 parts3 - 2 layers92.5 × 151 mm

- 6 layers50 × 75 mm

- 6 layers90 × 96 mm

- 6 layers50 × 50 mm

- 4 layers44.4 × 35.8 mm

Avionics motherboard
spacecraft-design-lab-2019/avionics-motherboard
Main flight computer board for the PyCubed-1 spacecraft
76 parts - 6 layers

Misc circuits
spacecraft-design-lab-2019/solar-misc-circuits
Circuit "blocks" for the energy harvesting, burn wire, photosensor, and FPC connector circuits
40 parts - 6 layers64 × 58 mm

Questions
How big is the Base PCB?
It measures 35.8 × 44.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Base use?
58 parts, built around the STM32H743VIT6, PAM2305AABADJ, MPZ1608S181ATAH0 and VSMY12850. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Base KiCad files?
From the spacecraft-design-lab-2019/OpenMV_Camera repository on GitHub, at the commit this page was made from: the board is !OpenMV_Master_Design/openmv4_cam_v1/base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Base design in my own project?
Its repository states no licence, so its author keeps all rights: ask spacecraft-design-lab-2019 before reusing the design.

