Skip to the content
2 layers234 × 68 mmDropin, the printed circuit board in 3D

A collection of open source hardware that has been designed by Spaceboards

Size
234 × 68 mm
Copper layers
2
Thickness
1.6 mm
Parts
126
Nets
81
Pads
513
Tracks, vias
719, 26
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
16 May 2019
Updated
12 Apr 2026

Overview

Dropin is an open-source printed circuit board by Spaceboards, from the Spaceboards/SpaceboardsHardware repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 234 × 68 mm with 126 parts on 81 nets, routed with 719 tracks and 26 vias.

It is built around the ATMEGA32U4-MU. Its parts include 49 switches, 48 diodes, 7 capacitors, 6 resistors and 2 connectors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Spaceboards Hardware

Status Key

❌ Unfinished

⚠️ Untested

✔️ Tested and functional

Designs

NameStatusContributors
2% Milk✔️PyroL, Soft_Sama
Akimbo⚠️
LongBoi❌
Pancake v1✔️MKUltra Corp
Pancake v2✔️MKUltra Corp
Waffle⚠️
XLant⚠️

All of these files are shared under CERN Open Hardware Licence Version 2 - Weakly Reciprocal Link this repository if you are selling any of these designs, These files are shared as is without any implied warranty or promise of being functional.

Visit our website at https://spaceboards.github.io/

Star History

Star History Chart

Parts

126
QtyValueFootprintReferences
48D_SmallKeebio-Parts:D_SOD123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +32
46SW_SPSTKeebio-Parts:Kailh-PG1350-1u-NoLEDSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +30
30.1uFCapacitor_SMD:C_0805_2012MetricC4, C5, C6
210kResistor_SMD:R_0805_2012MetricR1, R6
222Resistor_SMD:R_0805_2012MetricR3, R4
222pFCapacitor_SMD:C_0805_2012MetricC1, C2
25.11kResistor_SMD:R_0805_2012MetricR2, R5
2LOGOMyFiles:pancake3G***, G***
2SW_SPSTKeebio-Parts:Kailh-PG1350-1.5u-NoLEDSW37, SW43
110uFCapacitor_SMD:C_0805_2012MetricC7
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
11uFCapacitor_SMD:C_0805_2012MetricC3
1500mAFuse:Fuse_1206_3216MetricF1
1ATmega32U4-MUPackage_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mmU1
1LOGOMyFiles:pancakev2G***
1OLEDConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalP1
1SW_PushButton_Switch_SMD:SW_SPST_SKQG_WithoutStemSW50
1USB4085-GF-A_REVAMyFiles:GCT_USB4085-GF-A_REVAJ1

The 118 most common of 126 parts.

More from Spaceboards/SpaceboardsHardware

5
  • 2 layers415.5 × 73 mmKeyboard, the printed circuit board in 3D

    Keyboard

    Spaceboards/SpaceboardsHardware

    A collection of open source hardware that has been designed by Spaceboards

    136 parts144CERN-OHL-W-2.0
  • 2 layers281 × 76.2 mmWideZlant, the printed circuit board in 3D

    WideZlant

    Spaceboards/SpaceboardsHardware

    A collection of open source hardware that has been designed by Spaceboards

    121 parts144CERN-OHL-W-2.0
  • 2 layers233.9 × 89.2 mmDropin, the printed circuit board in 3D

    Dropin

    Spaceboards/SpaceboardsHardware

    A collection of open source hardware that has been designed by Spaceboards

    106 parts144CERN-OHL-W-2.0
  • 2 layers95.4 × 64.8 mmAkimbo, the printed circuit board in 3D

    Akimbo

    Spaceboards/SpaceboardsHardware

    A collection of open source hardware that has been designed by Spaceboards

    12 parts144CERN-OHL-W-2.0
  • 2 layers95.4 × 64.8 mmAkimbo, the printed circuit board in 3D

    Akimbo

    Spaceboards/SpaceboardsHardware

    A collection of open source hardware that has been designed by Spaceboards

    12 parts144CERN-OHL-W-2.0

Similar boards

  • 2 layers87.8 × 59.8 mmFreeDeck SMD 2020-02, the printed circuit board in 3D

    FreeDeck SMD 2020-02

    FreeYourStream/freedeck-hardware

    all the stuff you need to build your own FreeDeck

    37 parts772
  • 2 layers54 × 15 mmXyp gpib, the printed circuit board in 3D

    Xyp gpib

    xyphro/UsbGpib

    Versatile, cheap and portable USB to GPIB converter (USBTMC class based)

    25 parts690MIT
  • 4 layers40.6 × 17.8 mmPD Micro, the printed circuit board in 3D

    PD Micro

    ryan-ma/PD_Micro

    USB-C PD3.0 PPS on ATMega32U4 Arduino board

    61 parts439MIT
  • 2 layers37.3 × 14.7 mmFairberryMainboard, the printed circuit board in 3D

    FairberryMainboard

    Dakkaron/Fairberry

    The goal of this project is to add a BlackBerry Q10 keyboard to non-BlackBerry phones. While this can easily be adapted to suit any other phone with an USB port at the bottom, I will focus on releasing files for the…

    15 parts365
  • 2 layers50 × 90 mmMouse, the printed circuit board in 3D

    Mouse

    biomurph/Mouse

    Repository for Open Source Mouse Firmware and Hardware

    49 parts362MIT
  • 4 layers66 × 115.3 mmMemoryBrakout, the printed circuit board in 3D

    MemoryBrakout

    ccadic/sharpikeebo

    Miniature RPI Zero 2W shield with Sharp memory Display and USB Beyboard

    194 parts143
  • 2 layers33.9 × 19.2 mmDiabolic drive programmer, the printed circuit board in 3D

    Diabolic drive programmer

    unit72784/Diabolic-Drive

    Stealthy, modern, wireless keystroke injection tool in a universal 4 layer double-sided flash drive PCB form factor with 64 GB storage

    21 parts143
  • 2 layers68 × 69.4 mmKowgary16 cfx, the printed circuit board in 3D

    Kowgary16 cfx

    ChrisChrisLoLo/bancouver40

    A 4x10 CFX spaced low-profile mechanical keyboard.

    55 parts113GPL-3.0

Questions

How big is the Dropin PCB?

It measures 234 × 68 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dropin use?

126 parts, built around the ATMEGA32U4-MU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dropin KiCad files?

From the Spaceboards/SpaceboardsHardware repository on GitHub, at the commit this page was made from: the board is Keyboards/Pancake/V2/kicad/dropin.kicad_pcb and its schematic Keyboards/Waffle/kicad/Pancake_v8.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dropin design in my own project?

Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).