Skip to the content
4 layers40.8 × 20 mmEsp, the printed circuit board in 3D

A compact, custom-designed ESP32-C3 development board with USB-C connectivity, onboard antenna, and a clean PCB layout.

Size
40.8 × 20 mm
Copper layers
4
Thickness
1.6 mm
Parts
48
Nets
44
Pads
180
Tracks, vias
346, 88
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Feb 2026
Updated
11 Aug 2026

Overview

Esp is an open-source printed circuit board by souptik-samanta, from the souptik-samanta/esp32c3 repository on GitHub. It is a 4-layer board of 40.8 × 20 mm with 48 parts on 44 nets, routed with 346 tracks and 88 vias.

It is built around the ESP32-C3, MS5611-01BA03 and SHTC3, with the W25Q128JVPIQ, SPX3819M5-L-3-3 and USBLC6-2P6 among its other parts. Its parts include 21 capacitors, 9 resistors, 6 ICs, 3 inductors and 2 connectors. It belongs with the ESP32 and RISC-V boards of this library.

Main components

6

README

README.md

ESP32-C3 Custom Development Board

A compact, custom-designed ESP32-C3 development board with USB-C connectivity, onboard antenna, and a clean PCB layout.


3D Render

image

The board features a USB-C connector on the left side, two tactile switches (BOOT and EN), the ESP32-C3 QFN package at the center-right, a PCB trace antenna on the far right, and a 4-pin UART header (3V3, RXD, TXD, GND) along the bottom edge. All passives are 0402/0603 for a tight layout. with onboard temp humidity barometer and pressure

PCB Layout

3d Render

alt text

Front Copper

alt text

Back Copper

alt text

IN 1

alt text

IN 2

alt text

Board Outline

alt text


Features

  • Microcontroller: ESP32-C3 (RISC-V single-core, up to 160 MHz)
  • Wireless: 2.4 GHz Wi-Fi 4 and Bluetooth 5 (LE)
  • USB-C: For power and programming, no external UART adapter needed
  • PCB Antenna: Integrated trace antenna, no external module required
  • UART Header: 4-pin breakout (3V3, RXD, TXD, GND) for serial debugging
  • Buttons: BOOT and EN (reset) tactile switches
  • Power: USB 5V input with onboard 3.3V regulation
  • Form Factor: Compact two-layer board, hand-solderable with hot air

Pin Header

PinFunction
1+3V3
2RXD
3TXD
4GND

Getting Started

  1. Connect the board via USB-C to your computer.
  2. Install the ESP-IDF toolchain or use the Arduino core for ESP32.
  3. Hold the BOOT button while pressing EN to enter download mode.
  4. Flash your firmware and hit EN to run.

For serial debugging without USB, wire up the 4-pin UART header to any USB-to-serial adapter at 3.3V logic levels.

License

Hardware design files are provided as-is. Use at your own risk. Feel free to fork, modify, and build on this design for personal or commercial projects.

To make this Please download the esp32.zip(gerber files) go to jlcpcb upload upload the BOM AND cpl files and order!! that simple

Bill of Materials (BOM)

CommentDesignatorFootprintJLCPCB Part #
W25Q128JVPU2Winbond_USON-8-2EP_3x4mm_P0.8mm_EP0.2x0.8mmC2999380
RESETSW2, SW1SW_SPST_TS-1088-xR020C778164
27pFC1, C20603C1656
470ΩR3, R40402C25117
USBLC6-2P6U3SOT-666C15999
10µFC14, C15, C3, C70805C440198
100nFC4, C5, C6, C8, C90402C1525
5.1KΩR2, R5, R6, R7, R8, R90402C25905
ESP32-C3U1QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mmC2838500
22ΩR10402C25092
100nFC10, C11, C12, C13, C16, C18, C190603C14663
USB_C_Receptacle_USB2.0_14PJ1USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01AC2997432
MS5611-01BAU4LGA-8_3x5mm_P1.25mmC15639
2.2µFC170603C23630
2.2nHL1, L2, L30402C6652831
SPX3819M5-L-3-3U5SOT-23-5C20617301
3.3pFC20, C210402C1565
Crystal_GND24Y2Crystal_SMD_3225-4Pin_3.2x2.5mmC5444549
SHTC3U6Sensirion_DFN-4-1EP_2x2mm_P1mm_EP0.7x1.6mmC2880044

Cost Breakdown

  • PCB Fabrication Cost: $10 USD
  • Total Cost (Including Shipping): $~ 162 USD

How to use it / assemble it

Go to jlcpcb upload gerber select pcba give the cpl and desgnator files order it wait and there u have it connect usb c cable use arduino ide thonny esp32 tool whatever u want lol

Parts

48
QtyValueFootprintReferences
7100nCapacitor_SMD:C_0603_1608MetricC10, C11, C12, C13, C16, C18, C19
65.1KResistor_SMD:R_0402_1005MetricR2, R5, R6, R7, R8, R9
5100nCapacitor_SMD:C_0402_1005MetricC4, C5, C6, C8, C9
410uCapacitor_SMD:C_0805_2012MetricC3, C7, C14, C15
32.2nHInductor_SMD:L_0402_1005MetricL1, L2, L3
227pFCapacitor_SMD:C_0603_1608MetricC1, C2
23.3pFCapacitor_SMD:C_0402_1005MetricC20, C21
2470Resistor_SMD:R_0402_1005MetricR3, R4
2TestPointConnector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_VerticalTP1, TP3
12.2uCapacitor_SMD:C_0603_1608MetricC17
122Resistor_SMD:R_0402_1005MetricR1
1Antenna_ShieldRF_Antenna:Texas_SWRA117D_2.4GHz_LeftAE1
1BOOTButton_Switch_SMD:SW_SPST_TS-1088-xR020SW2
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1Crystal_GND24Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY2
1ESP32-C3Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mmU1
1LOGOLOGO.
1MS5611-01BAPackage_LGA:LGA-8_3x5mm_P1.25mmU4
1RESETButton_Switch_SMD:SW_SPST_TS-1088-xR020SW1
1SHTC3Sensor_Humidity:Sensirion_DFN-4-1EP_2x2mm_P1mm_EP0.7x1.6mmU6
1SPX3819M5-L-3-3Package_TO_SOT_SMD:SOT-23-5U5
1USBLC6-2P6Package_TO_SOT_SMD:SOT-666U3
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01AJ1
1W25Q128JVPPackage_SON:Winbond_USON-8-2EP_3x4mm_P0.8mm_EP0.2x0.8mmU2

Similar boards

  • 4 layers60 × 45 mmHotplate, the printed circuit board in 3D

    Hotplate

    Keyaan-07/Hotplate

    Check out the Project's files on KiCanvas(PCB and Heating element) and Onshape!

    85 partsMIT
  • 2 layers30 × 18 mmEsp usb, the printed circuit board in 3D

    Esp usb

    cheyao/esp-usb

    ESP32 Dev Board in a USB Port

    28 parts17
  • 2 layers20 × 20 mmTux mini v01, the printed circuit board in 3D

    Tux mini v01

    tux-friend/ESP32-Tux

    Documentation for ESP32-Tux Dev Board

    40 parts1GPL-3.0
  • 4 layers33.9 × 41 mmRf sense, the printed circuit board in 3D

    Rf sense

    fwdesai/ESP32-PCB-w-Trace-Antenna

    ESP32 based board with integrated trace antenna

    54 parts
  • 2 layers89.5 × 97.5 mmWearablesystem, the printed circuit board in 3D

    Wearablesystem

    manushri-d/ece445

    This repo is used for our Senior Design class where we put all of our updates for the semester!

    65 parts
  • 2 layers26 × 26 mmEsp32tux mini, the printed circuit board in 3D

    Esp32tux mini

    tux-friend/tux-cube

    Physics Sensor Cube Tux³

    57 parts18GPL-3.0
  • 2 layers13.5 × 10.7 mmEsplog ldo, the printed circuit board in 3D

    Esplog ldo

    VladimirP1/esplog-hardware

    28 parts5

Questions

How big is the Esp PCB?

It measures 40.8 × 20 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Esp use?

48 parts, built around the ESP32-C3, MS5611-01BA03, SHTC3 and W25Q128JVPIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp KiCad files?

From the souptik-samanta/esp32c3 repository on GitHub, at the commit this page was made from: the board is PCB/esp.kicad_pcb and its schematic PCB/esp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp design in my own project?

Its repository states no licence, so its author keeps all rights: ask souptik-samanta before reusing the design.