Skip to the content
2 layers39.4 × 109.2 mmMiditron front, the printed circuit board in 3D

midi2cv module best to be used with Elektron devices

Size
39.4 × 109.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
34
Nets
68
Pads
157
Tracks, vias
453, 47
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
13 May 2021
Updated
8 Oct 2023

Overview

Miditron front is an open-source printed circuit board by soundslikefrank, from the soundslikefrank/miditron repository on GitHub. It is a 2-layer board of 39.4 × 109.2 mm with 34 parts on 68 nets, routed with 453 tracks and 47 vias.

It is built around the BAT54S and SD-50BV. Its parts include 27 connectors, 4 switches, 2 resistors and 1 diode.

Main components

2

README

README.md

miditron

midi2cv module best to be used with Elektron devices

miditron

Parts

34
QtyValueFootprintReferences
22PJ398SMConnector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHolesJ10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23, J24, J25 +6
4TC002-N11AS1XKT-RGBTC002-N11AS1XKT-RGB:TC002N11AS1XKTRGBS1, S2, S3, S4
2100kResistor_SMD:R_0603_1608MetricR1, R2
2Conn_02x06_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_VerticalJ5, J6
1BAT54SPackage_TO_SOT_SMD:SOT-23D1
1Conn_01x10Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ7
1Conn_01x12Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_VerticalJ8
1SD-50BVSD-50BV:SD-50BVJ9

More from soundslikefrank/miditron

1
  • 2 layers39.4 × 109.2 mmMiditron back, the printed circuit board in 3D

    Miditron back

    soundslikefrank/miditron

    midi2cv module best to be used with Elektron devices

    144 parts4

Similar boards

  • 2 layers58.5 × 16.5 mmMidi panel mounted breakout-3.3v, the printed circuit board in 3D

    Midi panel mounted breakout-3.3v

    nikitalita/low-profile-midi-breakout

    low vertical profile midi breakout board, for front panel mounting. 3.3v only!

    16 partsMIT
  • 2 layers28 × 110 mmER MIDI THRU, the printed circuit board in 3D

    ER MIDI THRU

    land-boards/lb-boards

    land-boards - Board Designs

    27 parts31
  • 2 layers197.8 × 22 mmSequencer, the printed circuit board in 3D

    Sequencer

    DavenportEmma/sequencer

    27 parts
  • 2 layers58.2 × 38.1 mmUsb sniffer, the printed circuit board in 3D

    Usb sniffer

    ataradov/usb-sniffer

    Low-cost LS/FS/HS USB sniffer with Wireshark interface

    87 parts1.3kBSD-3-Clause
  • 4 layers94.4 × 72.8 mmRP2040 base, the printed circuit board in 3D

    RP2040 base

    Twisted-Fields/rp2040-motor-controller

    A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.

    325 parts419
  • 4 layers72.4 × 95.3 mmDingoPDM, the printed circuit board in 3D

    DingoPDM

    corygrant/dingoPDM

    Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.

    156 parts128MIT
  • 2 layers100 × 99.8 mmUnderdog, the printed circuit board in 3D

    Underdog

    turboedge/SpeedyBoards

    EMS boards powered by Speeduino

    396 parts110GPL-2.0
  • 6 layers203 × 151.8 mmPDNode Baseboard, the printed circuit board in 3D

    PDNode Baseboard

    DvidMakesThings/HW_PDNode-600-Pro

    The PDNode-600 is a professional-grade, 600W USB Power Delivery Unit designed specifically for compact 10-inch rack systems, targeting embedded developers, homelab enthusiasts, test benches, and smart infrastructure.

    236 parts86AGPL-3.0

Questions

How big is the Miditron front PCB?

It measures 39.4 × 109.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Miditron front use?

34 parts, built around the BAT54S and SD-50BV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Miditron front KiCad files?

From the soundslikefrank/miditron repository on GitHub, at the commit this page was made from: the board is hardware/miditron-front.kicad_pcb and its schematic hardware/cv_input.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Miditron front design in my own project?

Its repository states no licence, so its author keeps all rights: ask soundslikefrank before reusing the design.