
Barobord
sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!

a simple 6k keypad
Keypad pcb is an open-source printed circuit board by souffle17, from the souffle17/6k-keypad repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 72.4 × 83.1 mm with 32 parts on 48 nets, routed with 341 tracks and 31 vias.
It is built around the ATMEGA32U4-AU and PRTR5V0U2X. Its parts include 7 capacitors, 7 diodes, 7 switches, 6 resistors and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
A simple 2x3 mechanical keypad pcb and case. Custom firmware and functionality can be found here
Case parts are designed for either 3D printing or CNC machining, stacked and screwed together.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | D | Diode_SMD:D_SOD-123 | D2, D3, D4, D5, D6, D7 |
| 6 | SW_Push | marbastlib-mx:SW_MX_HS_1u | K1, K2, K3, K4, K5, K6 |
| 3 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R4 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 500m | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | ATmega32U4-A | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | random-keyboard-parts:Reset_Pretty-Mask | J1 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12 | USB1 |
| 1 | PRTR5V0U2X | random-keyboard-parts:SOT143B | D1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW0 |
| 1 | XTAL | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |

sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!


markstory/ursa-minor-keyboard
Design and schematics for the ursaminor keyboard



makenova/reverie
a mini 1800 keyboard based on the Elongate, Clarabelle, and Garbage Truck Keyboards

makenova/micro_redox
A family of boards inspired by the microdox and ferris

It measures 72.4 × 83.1 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the ATMEGA32U4-AU and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the souffle17/6k-keypad repository on GitHub, at the commit this page was made from: the board is keypad-pcb.kicad_pcb and its schematic keypad-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).