GPS Module
Gps is an open-source printed circuit board by sonicavionics, from the sonicavionics/4in-gps repository on GitHub, published under the MIT licence. It is a 4-layer board of 83.7 × 61.7 mm with 88 parts on 130 nets, routed with 632 tracks and 433 vias.
It is built around the RP2040, SN74LVC2G17DCKR and NC7WZ07P6X, with the NEO-M9N-00B, W25Q128JVPIQ and RT9013-33GB among its other parts. Its parts include 27 capacitors, 21 resistors, 10 ICs, 9 connectors and 6 diodes. It belongs with the radio and wireless boards and the RP2040 boards of this library.
3D Render
Schematic
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C5, C6, C8, C11, C13, C14, C15, C17, C18, C20, C21, C22, C26, C27 +1 |
| 5 | 1u | Capacitor_SMD:C_0402_1005Metric | C7, C10, C12, C24, C25 |
| 5 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J6, J7, J8, J9 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R8, R14, R20, R22 |
| 4 | 27 | Resistor_SMD:R_0402_1005Metric | R3, R4, R16, R17 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R11, R12 |
| 4 | JUMPER-SMT_2_NC_TRACE_SILK | GPSLIB:SMT-JUMPER_2_NC_TRACE_SILK | PPS_LED1, PWR1, PWR2, STAT_LED1 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D3, D4, D5, D6 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R10, R30 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R6, R15 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | C16, C19 |
| 2 | SN74LVC2G17DCKR | GPSLIB:DCK6 | U1, U10 |
| 2 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J2, J4 |
| 1 | clipboard:a5b3f77c-c1d0-4586-9ab7-7f2af37e3489 | ballsack1 | |
| 1 | 0.5A/40V/420mV | GPSLIB:SOD-323 | D2 |
| 1 | 10R | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 2.4k | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 270R | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 27n >300mA | Resistor_SMD:R_0402_1005Metric | L1 |
| 1 | 499R | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 75R | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | ABM8-272-T3 | ABM8-272-T3:ABM8-272-T3_ABR | X1 |
| 1 | BWSMA-KWE-Z001 | GPSLIB:SMA-TH_BWSMA-KWE-Z001 | RF1 |
| 1 | Bus_PCI_Express_x1 | Connector_PCBEdge:BUS_PCIexpress_x1 | J1 |
| 1 | Conn_01x02_Pin | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | J5 |
| 1 | FC0V474ZFTBR24 | GPSLIB:FC0V474ZFTBR24_KEM | C23 |
| 1 | JUMPER-SMT_2_NC_TRACE_SILK | GPSLIB:SMT-JUMPER_2 | VCC_RF1 |
| 1 | JUMPER-SMT_2_NC_TRACE_SILK | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | PLS |
| 1 | MCP25625T-E/ML | MCP25625T_E_ML:QFN28_6X6MC_MCH | U3 |
| 1 | NC7WZ07P6X | GPSLIB:SC-88&slash_SC70-6&slash_SOT-363_419B-02_ONS | U6 |
| 1 | NEO-M9N | GPSLIB:XCVR_NEO-M9N-00B | U5 |
| 1 | PESD9R3.3ST5G | Diode_SMD:D_SOD-923 | D1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U4 |
| 1 | RT9013-33GB | GPSLIB:SOT-23-5_RIT_LDO | U7 |
| 1 | SI1016X-T1-GE3 | GPSLIB:SOT_X-T1-GE3_VIS | U9 |
| 1 | TPS2115APWR | GPSLIB:PW8 | U8 |
| 1 | TP_GNSS_RST | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | TP_GNSS_SAFEBOOT | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | TP_VCC_RF | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | TS-1187A-B-A-B | TS-1187A-B-A-B:SW_TS-1187A-B-A-B | S2 |
| 1 | W25Q128JVP | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U2 |
| 1 | X322516MLB4SI | X322516MLB4SI:OSC_X322516MLB4SI | Y1 |
It measures 83.7 × 61.7 mm and has 4 copper layers, 1.6 mm thick.
88 parts, built around the RP2040, SN74LVC2G17DCKR, NC7WZ07P6X and NEO-M9N-00B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sonicavionics/4in-gps repository on GitHub, at the commit this page was made from: the board is kicad/gps.kicad_pcb and its schematic kicad/gps.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
PlanAndBuild/NoNameComputer-2.0
The NoNameComputer 2.0 AKA NNCpro is being designed for mid-high power rockets and other flying vehicle. It will be equipped with various sensors like barometers, IMUs, magnetometer, current sensing etc.
daedalus-ind/icarus-hardware
Hardware of the onboard flight computer for the Icarus rocket.
westphae/kingfisher
Go flight data recorder for a turbonormalized Beech Bonanza V35B, running on a Raspberry Pi 5
