Skip to the content
2 layers85.6 × 23.2 mmArc lighter, the printed circuit board in 3D

an electric lighter is a very useful project which we can use for start a fire or ignite our gas stove as like other lighter it is charge by a type c charger and use no need to refill gas just charge and whenever need just press the switch and use.

Size
85.6 × 23.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
7
Pads
19
Tracks, vias
42, 1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
26 Apr 2026
Updated
5 Jun 2026

Overview

Arc lighter is an open-source printed circuit board by sohamboyythrdh6, from the sohamboyythrdh6/electric-ARC-lighter repository on GitHub. It is a 2-layer board of 85.6 × 23.2 mm with 7 parts on 7 nets, routed with 42 tracks and 1 via.

It is built around the UF4007. Its parts include 1 resistor, 1 diode, 1 transistor, 1 connector and 1 switch.

Main components

1

README

README.md

electric-ARC-lighter

an electric lighter is a very useful project. which can be use for start a fire or ignite our gas stove .it's not like other lighters because it is charge by a type c charger and it dosen't need to refill gas .just charge and whenever need just press the switch and use.this project will teach us how crazy and dangerous can a hihg voltage transformer is which can turn 5 volt into 1000 of volts.

to build this lighter you jest need to collect the components pcb and those 3d models then connect all the parts to the pcb using solder later confirming everypart is in correct place put everything in the case and glued it and then it will be ready to use .But before using full charge this.

Screenshot 2026-05-18 213037 Screenshot 2026-06-01 223140 Screenshot 2026-05-15 214209

Parts

7
QtyValueFootprintReferences
1330Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1
1Battery_CellConnector_PinSocket_2.00mm:PinSocket_1x02_P2.00mm_VerticalBT1
1C_PolarizedCapacitor_THT:CP_Radial_D7.5mm_P2.50mm470uf1
1D880Package_TO_SOT_THT:TO-220-3_Horizontal_TabDownQ2
1SW_PushButton_Switch_THT:SW_PUSH-12mmSW1
1Screw_Terminal_01x03TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mmJ1
1uf4007Diode_THT:D_A-405_P7.62mm_HorizontalD1

Similar boards

  • 2 layers68 × 89 mmParanoiaBox, the printed circuit board in 3D

    ParanoiaBox

    profdc9/ParanoiaBox

    A standalone elliptic curve/AES file encryption and decryption device

    60 parts17
  • 2 layers96.3 × 98 mmAquarium, the printed circuit board in 3D

    Aquarium

    baranovskiykonstantin/aquarium

    Control the lighting and the heating of the aquarium.

    73 parts11
  • 2 layers100 × 70 mmMotorDriver, the printed circuit board in 3D

    MotorDriver

    JeyRunner/actonator

    3D printable robot actuator with belt-driven gearbox and custom FOC driver board.

    177 parts10MIT
  • 2 layers156.5 × 67.5 mmNixieScanDisplay, the printed circuit board in 3D

    NixieScanDisplay

    profdc9/NixieClock

    A Nixie clock that uses IN-14 tubes and very generic components that can be easily sourced.

    106 parts10
  • 4 layers147.8 × 77 mm2xBLDCPicoV3, the printed circuit board in 3D

    2xBLDCPicoV3

    AmericanRework/Pico-2x-BLDC

    One RP2040 Pico drives two brushless motors! SimpleFOC + Halls + 2304 drivers + TO-220 mosfets or IGBTs. Plugs directly into 450x automower motors.

    135 parts7
  • 2 layers373 × 132.3 mmSolarinverter, the printed circuit board in 3D

    Solarinverter

    cpipero/solarinverter

    Kicad Project to build a programmable Solar Inverter

    370 parts5CC0-1.0
  • 2 layers329.9 × 146.6 mmBabyHuey, the printed circuit board in 3D

    BabyHuey

    tristancollins/HiFi-BabyHuey

    An "Engineer's" Baby Huey EL34 PCB

    201 parts5
  • 2 layers30 × 100 mmMoskill, the printed circuit board in 3D

    Moskill

    telagod/moskill

    MosKill - Smart Mosquito Swatter with BLE, Kill Counting & Statistics | ESP32-C3 + KiCad PCB + UniApp

    95 parts2

Questions

How big is the Arc lighter PCB?

It measures 85.6 × 23.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Arc lighter use?

7 parts, built around the UF4007. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Arc lighter KiCad files?

From the sohamboyythrdh6/electric-ARC-lighter repository on GitHub, at the commit this page was made from: the board is PCB/arc lighter.kicad_pcb and its schematic PCB/arc lighter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Arc lighter design in my own project?

Its repository states no licence, so its author keeps all rights: ask sohamboyythrdh6 before reusing the design.