
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.

A Arduino pcb that is for a smart house system simulator
Smart house system pcb is an open-source printed circuit board by Snehit222, from the Snehit222/-Arduino-Security-Interface repository on GitHub. It is a 2-layer board of 209.5 × 112 mm with 13 parts on 35 nets, routed with 147 tracks and 7 vias.
It is built around the ARDUINO UNO R3. Its parts include 3 connectors, 2 capacitors, 1 resistor, 1 diode and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
A Arduino pcb that is for a smart house system simulator
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | C | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | Battery | Battery:BatteryHolder_Keystone_2479_3xAAA | BT1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_D14mm_H7mm_P10mm | BZ1 |
| 1 | Door front | Connector:FanPinHeader_1x03_P2.54mm_Vertical | M1 |
| 1 | LCD | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Ultrasonic | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | garage door | Connector:FanPinHeader_1x03_P2.54mm_Vertical | M2 |
| 1 | keypad | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |

AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.

AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum

Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.

PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno

jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4


ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.

It measures 209.5 × 112 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Snehit222/-Arduino-Security-Interface repository on GitHub, at the commit this page was made from: the board is Smart house system pcb.kicad_pcb and its schematic Smart house system sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Snehit222 before reusing the design.