Skip to the content
4 layers200 × 100 mmMesh rack, the printed circuit board in 3D
Size
200 × 100 mm
Copper layers
4
Thickness
1.6 mm
Parts
83
Nets
82
Pads
341
Tracks, vias
477, 78
Pours
24
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Feb 2026
Updated
10 Mar 2026

Overview

Mesh rack is an open-source printed circuit board by sneakylizard123-4, from the sneakylizard123-4/mesh_rack repository on GitHub. It is a 4-layer board of 200 × 100 mm with 83 parts on 82 nets, routed with 477 tracks and 78 vias.

It is built around the E22-900M30S, ESP32-S3-WROOM-1-N8 and XL1509-3.3, with the XL1509-5.0, NEO-M8N and TPD2EUSB30DRT among its other parts. Its parts include 23 capacitors, 18 resistors, 12 connectors, 10 diodes and 7 ICs. It belongs with the ESP32 boards of this library.

Main components

10

README

README.md

About

10" 1U Rack mounted meshtastic node with on-board GPS, LoRa, and bluetooth. expansion headers for sensors and displays sd/micro sd card support

blender render: Blender

Schematic and pcb: PCB

Schematic1 Schematic2 Schematic3 Schematic4 Schematic5 Schematic6 Schematic7 Schematic8 Schematic9

Cart: cart1 cart2 cart3 cart4 cart5 cart6 cart7 cart8

Parts

83
QtyValueFootprintReferences
1110kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR1, R2, R3, R4, R5, R6, R7, R18, R19, R20, R22
8MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4, H5, H6, H7, H8
6LEDLED_THT:LED_D5.0mmD4, D5, D6, D7, D8, D9
30.1uFCapacitor_SMD:C_0805_2012MetricC2, C4, C24
310uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1, C12, C23
322uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC5, C6, C18
20.1uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC13, C16
2100nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC11, C22
210kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR16, R17
21N5820Diode_THT:D_DO-201AD_P15.24mm_HorizontalD2, D10
222Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR12, R13
2470uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC14, C17
247uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC8, C10
25.1kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR14, R15
2680uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC19, C20
2Conn_01x02Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ4, J10
1100kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR21
1100uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC7
110uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC15
11uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC3
1220uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC9
133uHInductor_SMD:L_1206_3216MetricL1
147uHInductor_SMD:L_1206_3216MetricL2
1BOOTConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ5
1BZV55B15Diode_SMD:D_MiniMELFD1
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ11
1Conn_01x10Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_VerticalJ9
1Conn_02x09_Counter_ClockwiseConnector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_VerticalJ8
1Conn_Coaxial_SmallConnector_Coaxial:SMA_Amphenol_901-143_HorizontalJ12
1Conn_Coaxial_SmallConnector_Coaxial:U.FL_Molex_MCRF_73412-0110_VerticalJ7
1E22-900M30SE22-900M30S:XCVR_E22-900M30SU6
1ENConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6
1ESP32-S3-WROOM-1RF_Module:ESP32-S3-WROOM-1U2
1INA260Package_SO:TSSOP-16_4.4x5mm_P0.65mmU7
1IRF540NPackage_TO_SOT_THT:TO-220-3_VerticalQ2
1IRF9540NPackage_TO_SOT_THT:TO-220-3_VerticalQ1
1InputConnector_BarrelJack:BarrelJack_HorizontalJ1
1NEO-M8NRF_GPS:ublox_NEOU1
1Power SwitchTerminalBlock_Altech:Altech_AK100_1x02_P5.00mmJ2
1SM6T30ADiode_SMD:D_SMBD3
1SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1TPD2EUSB30Package_TO_SOT_SMD:Texas_DRT-3U5
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J3
1XL1509-3.3Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU4
1XL1509-5.0Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU3

Similar boards

  • 4 layers120 × 75 mmCuttlefish, the printed circuit board in 3D

    Cuttlefish

    AllenNeuralDynamics/harp.device.cuttlefish

    0414: an octal, TTL input/output device with programmable square wave output.

    195 parts
  • 4 layers90 × 100 mmHarp.device.quad.dac, the printed circuit board in 3D

    Harp.device.quad.dac

    AllenNeuralDynamics/harp.device.quac

    0364: This repository contains the hardware, firmware, and software related to the Harp quad DAC

    291 partsMIT
  • 4 layers70 × 168 mmValve controller, the printed circuit board in 3D

    Valve controller

    AllenNeuralDynamics/harp.device.valve-controller

    0368: a 16-channel valve controller

    224 parts
  • 4 layers101.5 × 43.6 mmAlcantara v.1.0, the printed circuit board in 3D

    Alcantara v.1.0

    zenitheesc/Alcantara

    Mobile Ground Station for stratospheric probe monitoring and rescue. Goes well with the Zenith Monitor app.

    90 parts5
  • 4 layersTitanrio, the printed circuit board in 3D

    Titanrio

    ggarciabaez/titanrio

    A RoboRIO-Inspired Expansion board for Robotics. Mostly for funsies + learning.

    83 parts
  • 2 layers82 × 60 mmEEE3088F Design project, the printed circuit board in 3D

    EEE3088F Design project

    Phila-H-23/kicad-project

    This repository contains the KiCad design files, documentation, and resources for the power subsystem of a Micromouse robot developed as part of the EEE3088F course at the University of Cape Town.

    111 parts
  • 4 layers40 × 130 mmWurtelvin, the printed circuit board in 3D

    Wurtelvin

    samvandenabeele/wurtelvin

    95 parts

Questions

How big is the Mesh rack PCB?

It measures 200 × 100 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Mesh rack use?

83 parts, built around the E22-900M30S, ESP32-S3-WROOM-1-N8, XL1509-3.3 and XL1509-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mesh rack KiCad files?

From the sneakylizard123-4/mesh_rack repository on GitHub, at the commit this page was made from: the board is kicad/mesh_rack.kicad_pcb and its schematic kicad/esp32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mesh rack design in my own project?

Its repository states no licence, so its author keeps all rights: ask sneakylizard123-4 before reusing the design.