Skip to the content
12

SM6T30A

STMicroelectronicsExtended

-55℃~+150℃ 200nA 30V 30V 41.5V 53.5A@8/20us 600W IEC 61000-4-2、IEC 61000-4-5 TVS Unidirectional SMB(DO-214AA) ESD and Surge Protection (TVS/ESD) ROHS

Part id
st/SM6T30A
Category
ESD And Surge Protection (TVS, ESD)
Package
SMB(DO-214AA)
Pins
2
In stock
4,529 at JLCPCB (C110904)
Used on
13 open-source boards

Overview

The SM6T30A is an ESD And Surge Protection made by STMicroelectronics in a SMB(DO-214AA) package with 2 pins. -55℃~+150℃ 200nA 30V 30V 41.5V 53.5A@8/20us 600W IEC 61000-4-2、IEC 61000-4-5 TVS Unidirectional SMB(DO-214AA) ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Diode:SM6T30A, from KiCad's library) and its footprint (Diode_SMD:D_SMB, from KiCad's library), ready for a KiCad board. 4,529 are in stock at JLCPCB (part C110904). 13 open-source boards in 10 repositories on GitHub use it.

Symbol

Diode:SM6T30AFrom KiCad's library

Footprint

12
Diode_SMD:D_SMBFrom KiCad's library

Pinout

2
The pins of the SM6T30A
PinNameType
1A1Passive
2A2Passive

Open-source boards using it

13See all 13
  • 2 layersEta rotary coffe dispenser, the printed circuit board in 3D

    Eta rotary coffe dispenser

    antonloof/eta_rotary_coffe_dispenser

    Dagny 2.0. Även kännd som ETAs kaffedispenser med gammal teknik

    117 parts
  • 4 layers52.1 × 81.9 mmTest controller carrier esp32, the printed circuit board in 3D

    Test controller carrier esp32

    INTenX/test-controller-carrier-esp32

    Carrier Board for ESP32-S3-DevKitC-1 that includes a 4 channel DAC and 8 channel ADC external expansion, as well power routing / monitoring.

    132 parts
  • 2 layers21.7 × 48.8 mmDut isolation board, the printed circuit board in 3D

    Dut isolation board

    INTenX/test-controller-dut-isolation-module

    Tester Add-On DC-DC converter module to allow isolation of DUT power domains for multi-channel applications

    11 parts
  • 2 layers100 × 52 mmPico Balance, the printed circuit board in 3D

    Pico Balance

    jacksonyann29/Pico_Balance

    General Purpose Robot PCB with 2 motor drivers, IMU and appropriate power management for 9-24v. Intended to be used standalone or alongside a computer depending on robotics application.

    42 parts
  • 2 layers146.6 × 112.5 mmBody Control Module, the printed circuit board in 3D

    Body Control Module

    Mustafa614/Body-Control-Module-Mini

    This Module are controlling wipers,baclights,door statues and comminicates with another ecu's via can bus

    74 parts
  • 4 layers200 × 100 mmMesh rack, the printed circuit board in 3D

    Mesh rack

    sneakylizard123-4/mesh_rack

    83 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SM6T30A?

Yes. The symbol is Diode:SM6T30A and the footprint Diode_SMD:D_SMB, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SM6T30A?

SMB(DO-214AA), with 2 pins. Its footprint is drawn on this page.

Where is the SM6T30A datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the SM6T30A?

JLCPCB lists it as part C110904, with 4,529 in stock; the sellers' links on this page open their listings.

What can replace the SM6T30A?

Parts like it in the library: the P6SMB30CA by hongjiacheng, the P6SMB30CA by LGE, the P6SMB30CA by ElecSuper and the P6SMB30A by hongjiacheng. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SM6T30A?

13 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.