Skip to the content
6 layers53.3 × 101.6 mmMega2560plus, the printed circuit board in 3D

Mega 2560+ is an upgraded version of the Arduino Mega 2560. It keeps the same form factor and pinout as the original so it still works with every Mega shield, but it adds an onboard sensor suite and an ESP32-S3…

Size
53.3 × 101.6 mm
Copper layers
6
Thickness
1.6 mm
Parts
149
Nets
197
Pads
729
Tracks, vias
2,010, 256
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
3 Aug 2026
Updated
6 Sep 2026

Overview

Mega2560plus is an open-source printed circuit board by sneakylizard123-4, from the sneakylizard123-4/Mega2560plus repository on GitHub. It is a 6-layer board of 53.3 × 101.6 mm with 149 parts on 197 nets, routed with 2,010 tracks and 256 vias.

It is built around the ATMEGA2560-16AU, ESP32-S3-WROOM-1U-N16R8 and BME680, with the FT231XS-R, TPS62163DSG and W25Q128JVSIQ among its other parts. Its parts include 46 capacitors, 31 resistors, 20 diodes, 17 ICs and 15 connectors. It belongs with the radio and wireless boards and the ESP32 and AVR (ATmega, ATtiny) boards of this library.

Main components

12

README

README.md

Mega 2560+

Mega 2560+ is an upgraded version of the Arduino Mega 2560. It keeps the same form factor and pinout as the original so it still works with every Mega shield, but it adds an onboard sensor suite and an ESP32-S3 co-processor for WiFi, Bluetooth, and sensor reading.

3D render

Why I made it

I kept using a Mega plus a pile of breakout boards, a CO2 sensor here, an IMU there, a WiFi module taped on somewhere. It was messy and fragile. I wanted a single board I can just drop into a project that already knows the room around it: temperature, humidity, air quality, CO2, and motion. And since everything talks to the network these days, an ESP32-S3 handles the WiFi/Bluetooth so the Mega can focus on running the actual project.

Key Features

  • ATmega2560-16A main MCU (same chip as the original Mega)
  • ESP32-S3-WROOM-1U co-processor with 16MB flash / 8MB PSRAM for WiFi and Bluetooth
  • Onboard sensor suite:
    • SCD41 CO2 sensor
    • BME680 temp / humidity / pressure / air quality
    • LSM6DSL 6-axis IMU
  • DS3231M RTC with battery backup (CR2032)
  • FM24C64C FRAM and W25Q128JVS SPI flash for storage
  • USB-C with FT231XS USB-UART and ESD protection
  • WS2812B-2020 addressable status LEDs
  • TPS62163 buck + TLV75733 LDO power section, barrel jack or battery input with reverse polarity protection
  • Drop-in Mega pinout, compatible with existing Mega shields

Images

PCB Layout

PCB render

Schematic

Root schematic

USB-UART ESP32 Mega 2560 Power Sensors Peripherals Translator Headers

How to use

It's an Arduino Mega with extras. Flash it like any Mega. The ATmega2560 programs over the USB-C port. The esp32 has its own usb header for programming which is connected directly to the esp32. The sensors and RTC sit on the I2C bus (SCL/SDA at pins 20/21) with different addresses:

DeviceI2C Address
BME6800x76
SCD410x62
LSM6DSL0x6A
DS3231M0x68

The ESP32-S3 connects to the Mega over UART (Serial1) through level translators, and handles WiFi/Bluetooth. It also reads the sensors over the same I2C bus.

Assembly

  1. Apply solder paste and solder all front side smd parts
  2. Solder the through-hole parts and the stuff on the back of the board.
  3. Insert the CR2032 coin cell for RTC backup.
  4. Power via USB-C or the barrel jack.

Bill of Materials

A machine-generated BOM.csv lives in the repo root. Full list:

DesignatorsValuePackageQty
BT1CR2032Coin cell holder1
C1-C6,C8,C10,C13-C16,C28-C32,C36,C370.1uF040219
C710uF04021
C9,C43-C460.1uF08055
C11,C1218pF04022
C1710uF06031
C18,C20,C21,C24,C25,C33-C35,C38-C420.1uF060313
C1922uF06031
C22,C23,C26,C271uF06034
D1,D2MBR0520SOD-1232
D3-D5,D9,D13,D17,D19,D20WS2812B-2020PLCC-4 2.0x2.0mm8
D6-D11,D14-D18Status LEDs04029
F1,F2500mA polyfuse18122
J1USB-C receptacleHRO TYPE-C-31-M-121
J22x02 headerPinSocket 2.54mm1
J3microSD slotHirose DM3D-SF1
J4Barrel jackPJ-102AH1
J5,J61x04 JST-SHJST SH BM04B-SRSS-TB2
J7-J9,J13,J141x08 headerPinSocket 2.54mm5
J112x18 headerPinHeader 2.54mm1
J121x10 headerPinHeader 2.54mm1
J152x06 headerPinHeader 2.54mm1
L12.2uHCoilcraft XAL50301
Q1DMP3013SFVPowerDI3333-81
R1,R35.1k04022
R2,R4,R6,R72204024
R5,R2010k04022
R8,R94.7k04022
R10-R13,R15,R2110k06036
R1410k08051
R16,R174.7k06032
R18,R19100k0402 / 06032
R22-R291k04028
R30,R312.2k04022
SW1Reset switchPTS645Sx1
SW2,SW3ButtonsTS-10882
U1,U3,U5USBLC6 ESD protectionSOT-23-63
U2FT231XSSSOP-201
U4ESP32-S3-WROOM-1U-N16R8ESP32-S3 module1
U6W25Q128JVSSOIC-81
U7ATmega2560-16ATQFP-1001
U8FM24C64CSOIC-81
U9TPS62163DSGWSON-81
U10,U11TLV75733PDBVSOT-23-52
U12SCD41-D-R2Sensirion SCD4x1
U13BME680LGA-81
U14LSM6DSLLGA-141
U15DS3231MSOIC-16W1
U16,U17SN74LVC1T45DBVSOT-23-62
Y116MHz crystal3225-4Pin1

Total cost: TBD

Firmware

Source lives in firmware/ as a PlatformIO project with two environments:

EnvTargetWhat it does
mega2560ATmega2560-16AUSB-UART (FT231XS), FM24C64C FRAM on I2C, Serial3 link to the ESP32
esp32s3ESP32-S3-WROOM-1USensor reading (SCD41, BME680, LSM6DSL, DS3231M), SPI flash, NeoPixel status LEDs, WiFi/BT-ready

Build with pio run -e mega2560 and pio run -e esp32s3. The ESP32-S3 co-processor handles the sensors over its I2C1/SPI3 buses; the Mega keeps standard Arduino compatibility. See firmware/README.md for the full pin map.

Known Issues

  • None yet. Board hasn't been fabbed. Expect some after the first build.

Credits

  • KiCad project files: kicad/
  • 3D models: Sensirion (SCD41), plus the WS2812B model referenced in the project

Parts

149
QtyValueFootprintReferences
190.1uFCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C4, C10, C13, C14, C15, C16, C28, C29, C30, C31, C32, C36, C37 +3
130.1uFCapacitor_SMD:C_0603_1608MetricC18, C20, C21, C24, C25, C33, C34, C35, C38, C39, C40, C41, C42
81kResistor_SMD:R_0402_1005MetricR22, R23, R24, R25, R26, R27, R28, R29
8WS2812B-2020LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mmD3, D4, D5, D9, D13, D17, D19, D20
610kResistor_SMD:R_0603_1608MetricR10, R11, R12, R13, R15, R21
6MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4, H5, H6
50.1uFCapacitor_SMD:C_0805_2012MetricC9, C43, C44, C45, C46
5Conn_01x08Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ7, J8, J9, J13, J14
41uFCapacitor_SMD:C_0603_1608MetricC22, C23, C26, C27
422Resistor_SMD:R_0402_1005MetricR2, R4, R6, R7
3GREENLED_SMD:LED_0402_1005MetricD14, D15, D16
210kResistor_SMD:R_0402_1005MetricR5, R20
218pFCapacitor_SMD:C_0402_1005MetricC11, C12
22.2kResistor_SMD:R_0402_1005MetricR30, R31
24.7kResistor_SMD:R_0402_1005MetricR8, R9
24.7kResistor_SMD:R_0603_1608MetricR16, R17
25.1kResistor_SMD:R_0402_1005MetricR1, R3
2500mACapacitor_SMD:C_1812_4532MetricF1, F2
2Conn_01x04_MountingPinConnector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_VerticalJ5, J6
2MBR0520Diode_SMD:D_SOD-123D1, D2
2REDLED_SMD:LED_0402_1005MetricD11, D12
2SN74LVC1T45DBVPackage_TO_SOT_SMD:SOT-23-6U16, U17
2SW_SPSTButton_Switch_SMD:SW_SPST_TS-1088-xR020SW2, SW3
2TLV75733PDBVPackage_TO_SOT_SMD:SOT-23-5U10, U11
2USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U1, U3
1100kResistor_SMD:R_0603_1608MetricR19
1100kResistor_SMD:R_0402_1005MetricR18
110kResistor_SMD:R_0805_2012MetricR14
110uFCapacitor_SMD:C_0603_1608MetricC17
110uFCapacitor_SMD:C_0402_1005MetricC7
116MHz X322516MLB4SICrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
12.1mm ID 5.5mm OD PJ-102AHConnector_BarrelJack:BarrelJack_CUI_PJ-102AH_HorizontalJ4
12.2uH Coilcraft XAL5030-222MECInductor_SMD:L_Coilcraft_XAL5030-XXXL1
122uFCapacitor_SMD:C_0603_1608MetricC19
1ATmega2560-16APackage_QFP:TQFP-100_14x14mm_P0.5mmU7
1BLUELED_SMD:LED_0402_1005MetricD6
1BME680Package_LGA:Bosch_LGA-8_3x3mm_P0.8mm_ClockwisePinNumberingU13
1CR2032Battery:BatteryHolder_LINX_BAT-HLD-012-SMTBT1
1Conn_01x10Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ12
1Conn_02x02_Counter_ClockwiseConnector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_VerticalJ2
1Conn_02x06_Counter_ClockwiseConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_VerticalJ15
1Conn_02x18_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_VerticalJ11
1DMP3013SFVPackage_SON:Diodes_PowerDI3333-8Q1
1DS3231MPackage_SO:SOIC-16W_7.5x10.3mm_P1.27mmU15
1ESP32-S3-WROOM-1U-N16R8RF_Module:ESP32-S3-WROOM-1UU4
1FM24C64CPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU8
1FT231XSPackage_SO:SSOP-20_3.9x8.7mm_P0.635mmU2
1LOGOlogo:linuxpenguin_cuG***
1LOGOlogo:empire_cuG***
1LOGOlogo:empire_maskG***
1LOGOlogo:linuxpenguin-maskG***
1LSM6DSLPackage_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4yU14
1Micro_SD_Card_Det2Connector_Card:microSD_HC_Hirose_DM3D-SFJ3
1ORANGELED_SMD:LED_0402_1005MetricD8
1PURPLELED_SMD:LED_0402_1005MetricD7
1SCD41-D-R2Sensor:Sensirion_SCD4x-1EP_10.1x10.1mm_P1.25mm_EP4.8x4.8mmU12
1SW_SPSTButton_Switch_SMD:SW_SPST_PTS645Sx43SMTR92SW1
1SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1TC2030Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_VerticalJ10
1TPS62163DSGPackage_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalViasU9
1USBLC6-4SC6Package_TO_SOT_SMD:SOT-23-6U5
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1
1W25Q128JVSPackage_SO:SOIC-8_5.3x5.3mm_P1.27mmU6
1WHITELED_SMD:LED_0402_1005MetricD10
1YELLOWLED_SMD:LED_0402_1005MetricD18

More from sneakylizard123-4/Mega2560plus

2
  • 4 layers53.3 × 101.6 mmMega2560plus, the printed circuit board in 3D

    Mega2560plus

    sneakylizard123-4/Mega2560plus

    Mega 2560+ is an upgraded version of the Arduino Mega 2560. It keeps the same form factor and pinout as the original so it still works with every Mega shield, but it adds an onboard sensor suite and an ESP32-S3…

    146 parts
  • 6 layers53.3 × 101.6 mmMega2560plus, the printed circuit board in 3D

    Mega2560plus

    sneakylizard123-4/Mega2560plus

    Mega 2560+ is an upgraded version of the Arduino Mega 2560. It keeps the same form factor and pinout as the original so it still works with every Mega shield, but it adds an onboard sensor suite and an ESP32-S3…

    146 parts

Similar boards

  • 2 layers97.8 × 58.3 mmControlexp, the printed circuit board in 3D

    Controlexp

    Simonhajd/Triton-Float

    Float Repo for the 2026 Triton Float

    37 parts
  • 4 layers106 × 88 mmLuchtmeter, the printed circuit board in 3D

    Luchtmeter

    KVR-CIBER/luchtmeter-s3

    ESP32-S3 luchtmeter: 4.3in touch, SCD41/SHT45/LTR-303, NFC, LiPo, ESPHome + behuizing

    76 parts
  • 4 layers95.9 × 90.2 mmCDH PCB, the printed circuit board in 3D

    CDH PCB

    ManSEDS-Satellites-and-Space-Systems/CubeSat-OBC

    The version 2 of the C&DH PCB. Features an STM32H743ZGT6 as central proccessor and 32MB of SDRAM.

    95 parts
  • 2 layers76 × 106 mmSnack Machine, the printed circuit board in 3D

    Snack Machine

    Jnesselr/Vending-Machine

    105 parts2MIT
  • 2 layers75 × 40 mmRadiocore, the printed circuit board in 3D

    Radiocore

    ansemjo/chronovfd

    hardware project for a clock around a russian ivl2-5/7 vfd and an esp32-wroom module

    55 parts13CERN-OHL-P-2.0
  • 4 layers146.1 × 55 mmStarGate MainBoard, the printed circuit board in 3D

    StarGate MainBoard

    plhsystems/stargate-mainboard-esp32

    Mainboard for Kristian's stargate projects, based on ESP32-S3

    171 parts4
  • 4 layers101.6 × 53.3 mmH730duino, the printed circuit board in 3D

    H730duino

    martinribelotta/h730duino

    STM32H7 Arduino form factor and software compatible board

    111 parts47MIT
  • 4 layers128 × 184 mmCosmicpi 1.7, the printed circuit board in 3D

    Cosmicpi 1.7

    CosmicPi/CosmicPiV1.7PCB

    PCB for Version 1.7 of the Cosmic Pi Hardware. Incremental changes from V1.6. This design is licensed under the CERN OHL V1.2

    219 parts14

Questions

How big is the Mega2560plus PCB?

It measures 53.3 × 101.6 mm and has 6 copper layers, 1.6 mm thick.

What parts does the Mega2560plus use?

149 parts, built around the ATMEGA2560-16AU, ESP32-S3-WROOM-1U-N16R8, BME680 and FT231XS-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mega2560plus KiCad files?

From the sneakylizard123-4/Mega2560plus repository on GitHub, at the commit this page was made from: the board is kicad/Mega2560plus.kicad_pcb and its schematic kicad/Mega2560plus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mega2560plus design in my own project?

Its repository states no licence, so its author keeps all rights: ask sneakylizard123-4 before reusing the design.