

Sensify Main Board
Generate Hardware - Sensify Fall 2024
- Size
- 31.8 × 130 mm
- Copper layers
- 4
- Thickness
- 1.8 mm
- Parts
- 146
- Nets
- 137
- Pads
- 484
- Tracks, vias
- 1,007, 157
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Sep 2024
- Updated
- 30 Nov 2024
Overview
Sensify Main Board is an open-source printed circuit board by smvumbaco, from the smvumbaco/Sensify-FA24 repository on GitHub. It is a 4-layer board of 31.8 × 130 mm with 146 parts on 137 nets, routed with 1,007 tracks and 157 vias.
It is built around the ESP32-WROOM-32E-N16, CP2102N-A02-GQFN28 and BQ25306RTER, with the LD29150DT33R, AO3400A and 500ASSP3M2QE among its other parts. Its parts include 43 resistors, 38 capacitors, 9 ICs, 8 connectors and 7 transistors. It belongs with the ESP32 boards of this library.
Main components
10ESP32-WROOM-32E-N16
WIFI-SMD-40℃~+85℃ -98dBm 112mA 2.4GHz 20dBm 239mA 3V~3.6V Bluetooth4.2 ESP32-DOWD-V3 On-board PCB Antenna UART、SDIO、SPI、I2C、GPIO、ADC、DAC、Ethernet、TWAI SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesCP2102N-A02-GQFN28
QFN-28-EP(5x5)-40℃~+85℃ 195uA 3V~3.6V 9.5mA USB 2.0 USB to UART QFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB ConvertersBQ25306RTER
WQFN-16(3x3)-40℃~+85℃ 17V 2 3A 4.25uA Charging IC Lithium Battery、LiFePO4 Battery Support WQFN-16(3x3) Battery Management ROHSTexas InstrumentsBattery ManagementLD29150DT33R
TO-252-2(DPAK)-40℃~+125℃@(Tj) 1 1.5A 132uVrms 13V 15mA 3.3V 400mV@(1.5A) 67dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs500ASSP3M2QE
插件-30℃~+85℃ 28V Rectangular Columnar SPDT Through Hole 插件 Slide Switches ROHSE-SwitchSlide SwitchesBSS223PWH6327XTSA1
SOT-323SOT-323 SMT ROHSInfineon TechnologiesUncategorisedCL-196HR-CD-T
0603LED Indication - DiscreteCITIZENDMP3099L-7-ES
SOT-231 P-Channel 1.4W 1.5V 3.8A 30V 46mΩ@10V、62mΩ@4.5V 550pF 6.5nC@10V 63pF 75pF P-Channel SOT-23 MOSFETs ROHSElecSuperMOSFETsITV4030L1412NR
-- Disposable fuses ROHSLittelfuseDisposable Fuses
README
README.mdDirectory Structure:
.
|
|───production # contains files needed for final prototype
| |
| |───eCAD # contains the KiCAD project
| └───src # contains the code needed for deployment
|
|───testing # contains files relevant to testing components
|
└───README.md # this file!Preferred Tools
- KiCAD for PCB development
- Visual Studio Code / PlatformIO for code development
- Git CLI / GitHub Desktop for managing Git
Branches
To isolate conflicts for schematics and code, we use two branches to actually develop off of depending on discipline
develop/ecadis for schematic development, please create PR's into this branch for schematics and operate in this branch for layoutdevelop/srcis for code development, please create PR's into this branch for features
References
- Schematics + Components (WIP)
Practice Good Git Hygiene!
- Only commit files you intended to change
- Create branches for each feature, and larger branches for each development effort (i.e.
develop/*) - Check your branch before starting work
- Pull frequently to avoid conflicts
- Make Pull Requests when you are ready to merge into a larger branch
Git Resources
Parts
146| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14, TP15 |
| 8 | 1 uF | Capacitor_SMD:C_0402_1005Metric | C29, C30, C31, C32, C33, C34, C35, C36 |
| 5 | 0 | Resistor_SMD:R_0402_1005Metric | R35, R36, R37, R38, R39 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R13, R16, R17, TH1 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R24, R25, R31, R32, R41 |
| 4 | Conn_01x02_Socket | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J5, J6, J7, J8 |
| 4 | DRV2605LDGSR | Sensify Footprints:SOP50P490X110-10N | U7, U8, U9, U10 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 0.01u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C5, C11 |
| 3 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C23, C24, C25 |
| 3 | 0.47u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C8, C9 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R27, R28, R40 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18, C21, C22 |
| 2 | 0 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7, R42 |
| 2 | 0.1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C7 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6, R8 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C37, C38 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C14 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R33, R34 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R23, R26 |
| 2 | 50 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | AO3400A | Sensify Footprints:SOT95P280X125-3N | Q5, Q6 |
| 2 | PMPB13XNE,115 | Sensify Footprints:DFN2020MD-6_SOT1220_NEX | Q2, Q3 |
| 2 | SW_Push | Sensify Footprints:SW_1825910-6-4 | SW2, SW3 |
| 1 | 0.33u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15 |
| 1 | 0532611271 | Sensify Footprints:MOLEX_0532611271 | J4 |
| 1 | 1-2834011-2 | Sensify Footprints:128340112 | J2 |
| 1 | 1-2834011-3 | Sensify Footprints:128340113 | J1 |
| 1 | 1.33M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R14 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R19 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C28 |
| 1 | 100u | Sensify Footprints:CAPPM3528X210N | C20 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19 |
| 1 | 10u | Sensify Footprints:T491A | C16 |
| 1 | 10u | Sensify Footprints:IND_VLS6045EX-100M | L2 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C26 |
| 1 | 1332645 | Sensify Footprints:PHOENIX_1332645 | J3 |
| 1 | 150 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R18 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12 |
| 1 | 2.2k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R9 |
| 1 | 2.2u | Sensify Footprints:IND_PA4332.222NLT_PUL | L1 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 2.2u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 1 | 22.1k | Resistor_SMD:R_0402_1005Metric | R29 |
| 1 | 22u | Sensify Footprints:CAPPM3528X210N | C17 |
| 1 | 250 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11 |
| 1 | 27k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10 |
| 1 | 2N700 | Sensify Footprints:SOT95P240X111-3N | Q1 |
| 1 | 3.3V | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | 365 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R20 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C27 |
| 1 | 435151014845 | Sensify Footprints:435151014845 | S1 |
| 1 | 47.5k | Resistor_SMD:R_0402_1005Metric | R30 |
| 1 | 470p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C13 |
| 1 | 47n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C12 |
| 1 | 500ASSP3M2QE | Sensify Footprints:500ASSP3M2QE_EWI | SW1 |
| 1 | 51k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21 |
| 1 | 5V | TestPoint:TestPoint_Pad_D2.0mm | TP5 |
| 1 | 5m | Sensify Footprints:PS0612_2-10mOHM_YAG | R5 |
| 1 | BQ25306RTER | Sensify Footprints:IC_BQ25306RTER | U2 |
| 1 | BSS223PWH6327XTSA1 | Sensify Footprints:SOT65P210X100-3N | Q4 |
| 1 | CL-196HR-CD-T | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | CP2102N-A02-GQFN28 | Sensify Footprints:QFN28_5X5_SIL-M | U6 |
| 1 | DMP3099L-7 | Sensify Footprints:DMP3099L-7_DIO | Q7 |
| 1 | EN | TestPoint:TestPoint_Pad_D2.0mm | TP18 |
| 1 | ESP32-WROOM-32E-N16 | Sensify Footprints:ESP32-WROOM-32E_EXP | U5 |
| 1 | FLASHING_VBUS_5V | TestPoint:TestPoint_Pad_D2.0mm | TP17 |
| 1 | GND | TestPoint:TestPoint_Pad_D2.0mm | TP3 |
| 1 | HAPTICS_EN | TestPoint:TestPoint_Pad_D2.0mm | TP19 |
| 1 | INTERRUPT1_IMU | TestPoint:TestPoint_Pad_D2.0mm | TP20 |
| 1 | INTERRUPT2_IMU | TestPoint:TestPoint_Pad_D2.0mm | TP21 |
| 1 | IO0 | TestPoint:TestPoint_Pad_D2.0mm | TP16 |
| 1 | ITV4030L1412NR | Sensify Footprints:ITV4030_LTF | F1 |
| 1 | LD29150DT33R | Sensify Footprints:DPAK456P972X240-3N | U3 |
| 1 | LED | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LM22676MRX-5.0_NOPB | Sensify Footprints:VREG_LM5017MR_NOPB | U4 |
| 1 | LOGO | sensifymini | G*** |
The 138 most common of 146 parts.
More from smvumbaco/Sensify-FA24
2- 2 layers35.1 × 55.1 mm

- 2 layers37.9 × 45.8 mm

Similar boards
- 4 layers55.9 × 55.9 mm

QUADCOPTER
Riskerx/QUADCOPTER
QuadCopter Rev B: STM32F401 four-layer flight-controller PCB, manufacturing files, hardware documentation and firmware integration plan.
103 parts - 2 layers116.5 × 60.3 mm

TalDoor
akaStanley/TalDoor
GatekeeperV2- POE powered NFC Door lock system using the PocketBeagle
67 parts14GPL-3.0 - 4 layers92.7 × 72.1 mm

- 4 layers100 × 100 mm

- 2 layers100 × 38 mm

- 4 layers90 × 66 mm

Audio
AndreasNielsen4000/Group-7-IoT-Project
The project is a wireless speaker system that can play music from a Bluetooth or WiFi source. The system consists of four main parts with subcomponents:
162 parts1 - 4 layers63 × 72.8 mm

Side Project
gmalberico/Vehicle-Forward-Warning-Sensor-Project
A compact vehicle-mounted prototype that uses LiDAR ranging and wireless communication to warn a driver when an object is detected ahead.
38 parts - 2 layers50 × 70 mm

Questions
How big is the Sensify Main Board PCB?
It measures 31.8 × 130 mm and has 4 copper layers, 1.8 mm thick.
What parts does the Sensify Main Board use?
146 parts, built around the ESP32-WROOM-32E-N16, CP2102N-A02-GQFN28, BQ25306RTER and LD29150DT33R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensify Main Board KiCad files?
From the smvumbaco/Sensify-FA24 repository on GitHub, at the commit this page was made from: the board is production/ecad/Sensify Main Board/Sensify Main Board.kicad_pcb and its schematic production/ecad/Novel Mechanism 1 Board/Novel Mechanism 1 Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensify Main Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask smvumbaco before reusing the design.