Skip to the content
17

BQ25306RTER

Texas InstrumentsExtended

-40℃~+85℃ 17V 2 3A 4.25uA Charging IC Lithium Battery、LiFePO4 Battery Support WQFN-16(3x3) Battery Management ROHS

Part id
ti/BQ25306RTER
Category
Battery Management
Package
WQFN-16(3x3)
Pins
17
In stock
24,885 at JLCPCB (C3682611)
Used on
6 open-source boards

Overview

The BQ25306RTER is a battery Management made by Texas Instruments in a WQFN-16(3x3) package with 17 pins. -40℃~+85℃ 17V 2 3A 4.25uA Charging IC Lithium Battery、LiFePO4 Battery Support WQFN-16(3x3) Battery Management ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:BQ25306RTER, from EasyEDA) and its footprint (EasyEDA_Cloud:TQFN-16_L3.0-W3.0-P0.50-BL-EP1.7, from EasyEDA), ready for a KiCad board. 24,885 are in stock at JLCPCB (part C3682611). 6 open-source boards in 5 repositories on GitHub use it.

Symbol

1VBUS2REGN3STAT4ICHG5POL6EN#7TS8FB_GND9FB10BAT11GND12GND13SW14SW15BTST16PMID17PAD
EasyEDA_Cloud:BQ25306RTERFrom EasyEDA

Footprint

17
EasyEDA_Cloud:TQFN-16_L3.0-W3.0-P0.50-BL-EP1.7From EasyEDA

From the datasheet

17
Supply, least
4.1 V · VBUS, recommended operating, min · p. 7
Supply, most
17 V · VBUS, recommended operating, max · p. 7
Supply, absolute maximum
28 V · VBUS, converter not switching, absolute max · p. 7
Works from
-40 °C · ambient operating temperature, min · p. 7
Works up to
85 °C · ambient operating temperature, max · p. 7
Junction, hottest
150 °C · junction temperature, absolute max · p. 7
Takes asleep
3.5 µA · VBUS disable mode, VBUS = 5 V, VBAT = 4 V, typical · p. 8
Takes asleep
170 nA · BAT and SW leakage in HiZ mode, VBAT = VSW = 4.5 V, VBUS floating, typical · p. 8
Gives
3 A · SW output current, recommended operating max · p. 7
Current limit
3.35 A · input current regulation, typical · p. 9
Current limit
6.2 A · high-side FET cycle-by-cycle current limit, typical · p. 10
A pin gives at most
6 mA · STAT output sink current, absolute max · p. 7
Feedback reference
1.1 V · FB battery regulation reference, TJ = -40 to 85 °C, typical · p. 9
Switches at
1.2 MHz · PWM switching frequency at SW, typical · p. 10
Junction to air (RTE)
45.8 K/W · junction-to-ambient thermal resistance, JEDEC · p. 8
Junction to board (RTE)
19 K/W · junction-to-board thermal resistance · p. 8
Junction to case (RTE)
48.5 K/W · junction-to-case top thermal resistance · p. 8

Open-source boards using it

6
  • 4 layers63 × 72.8 mmSide Project, the printed circuit board in 3D

    Side Project

    gmalberico/Vehicle-Forward-Warning-Sensor-Project

    A compact vehicle-mounted prototype that uses LiDAR ranging and wireless communication to warn a driver when an object is detected ahead.

    38 parts
  • 4 layers31.8 × 130 mmSensify Main Board, the printed circuit board in 3D

    Sensify Main Board

    smvumbaco/Sensify-FA24

    Generate Hardware - Sensify Fall 2024

    146 parts
  • 2 layers40 × 30 mmDesign files, the printed circuit board in 3D

    Design files

    zninjamonkey/3A-UPS-module

    made for hack club half life in 1 week. cut me some slack

    40 parts
  • 2 layers130.6 × 162.4 mmZerowriter Inkplate 5 Gen2, the printed circuit board in 3D

    Zerowriter Inkplate 5 Gen2

    zerowriter/zerowriter_ink

    General repo for all things Zerowriter Ink

    656 parts46GPL-3.0
  • 2 layers130.6 × 75.2 mmZerowriter Inkplate 5 Gen2, the printed circuit board in 3D

    Zerowriter Inkplate 5 Gen2

    zerowriter/zerowriter_ink

    General repo for all things Zerowriter Ink

    322 parts46GPL-3.0

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the BQ25306RTER?

Yes. The symbol is EasyEDA_Cloud:BQ25306RTER and the footprint EasyEDA_Cloud:TQFN-16_L3.0-W3.0-P0.50-BL-EP1.7, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BQ25306RTER?

WQFN-16(3x3), with 17 pins. Its footprint is drawn on this page.

Where is the BQ25306RTER datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the BQ25306RTER?

JLCPCB lists it as part C3682611, with 24,885 in stock; the sellers' links on this page open their listings.

What can replace the BQ25306RTER?

Parts like it in the library: the ISL9205IRZ-T by Renesas Electronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BQ25306RTER?

6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.