

Hexapod Hardware
- Size
- 92.7 × 72.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 107
- Nets
- 146
- Pads
- 494
- Tracks, vias
- 1,106, 192
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Apr 2023
- Updated
- 12 Jul 2023
Overview
Hexapod Hardware is an open-source printed circuit board by putzio, from the putzio/Hexapod_2.0_Hardware repository on GitHub. It is a 4-layer board of 92.7 × 72.1 mm with 107 parts on 146 nets, routed with 1,106 tracks and 192 vias.
It is built around the STM32G030K8T6, LM2902 and AZ1117CH-5.0TRG1, with the LD29150DT33R among its other parts. Its parts include 68 resistors, 20 connectors, 15 ICs and 4 capacitors. It belongs with the RP2040 and STM32 boards of this library.
Main components
4STM32G030K8T6
LQFP-32(7x7)-40℃~+85℃ 12bit 2V~3.6V 30 32 Bit 64KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH LQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)LM2902
SOP-14-15V~-1.5V、1.5V~15V -40℃~+125℃ 1.3MHz 2nA 300nA 30uV/℃ 3V~30V 4 400V/ms 40mA 40nV/√Hz@1kHz 700uA 7mV 80dB Built-in compensation SOP-14 Operational Amplifier ROHSSlkorOperational AmplifierAZ1117CH-5.0TRG1
SOT-223-20℃~+125℃@(Tj) 0.003%Vout 1 1.2V@(800mA) 1.35A 15V 4mA 5V 70dB@(120Hz) Fixed Over Current Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLD29150DT33R
TO-252-2(DPAK)-40℃~+125℃@(Tj) 1 1.5A 132uVrms 13V 15mA 3.3V 400mV@(1.5A) 67dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
107| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R802, R803, R804, R805, R806, R807, R808, R819, R1001, R1002, R1003, R1004, R1005, R1006, R1007, R1008 +14 |
| 19 | 47k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R814, R815, R816, R817, R818, R831, R832, R833, R834, R841, R847, R1014, R1015, R1016, R1017, R1018 +3 |
| 18 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R809, R810, R811, R812, R813, R827, R828, R829, R830, R843, R844, R1009, R1010, R1011, R1012, R1013 +2 |
| 12 | Conn_01x03_Female | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J301, J302, J303, J304, J305, J306, J307, J308, J309, J310, J311, J312 |
| 8 | LM2902 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U801, U802, U803, U804, U805, U806, U1001, U1002 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C901, C902 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1001, J1002 |
| 2 | MCP3008-I_SL | Package_SO:SO-16_3.9x9.9mm_P1.27mm | IC701, IC702 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J901, J902 |
| 1 | 0R39 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R801 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C601 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C904 |
| 1 | AT25SF081-XMHD-X | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U1101 |
| 1 | AZ1117CH-5.0TRG1 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U901 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J201 |
| 1 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1102 |
| 1 | Conn_01x05_Pin | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1101 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1003 |
| 1 | LD29150DT33R | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U902 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U501 |
| 1 | STM32G030K8T6 | Package_QFP:LQFP-32_7x7mm_P0.8mm | IC601 |
More from putzio/Hexapod_2.0_Hardware
1- 2 layers54.4 × 49.3 mm

Similar boards
- 4 layers31.8 × 130 mm

- 4 layers100 × 100 mm

- 2 layers85.6 × 54 mm

SnakeBusinessCard
alex1324575/snake-pcb-business-card
STM32-powered PCB business card with a 10x9 LED Snake game, USB-C power, and passive NFC. KiCad hardware, C firmware, and verification reports.
136 parts - 2 layers80 × 55 mm

Im01
amuzdgp3-prog/im-01-pulse-device
Отдельный модуль к системе обслуживания аппаратов 2.apixspb.ru. Устройство слушает импульсные выходы монетоприёмника и купюроприёмника, копит показания в FRAM и дважды в сутки передаёт их на сервер по LTE Cat.1.
108 parts - 4 layers58 × 58 mm

- 2 layers100 × 70 mm

Wired console k9ay
ra0sms/universal_control_console
Control console for any types of antenna's switches
115 partsMIT - 2 layers220 × 120 mm

- 6 layers100 × 160 mm

OWNVERTER
owntech-foundation/OWNVERTER
The OwnVerter is an open-source 3-phase power converter that can be used to control multiple types of motors and is compatible with different types of sensors.
474 parts16
Questions
How big is the Hexapod Hardware PCB?
It measures 92.7 × 72.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Hexapod Hardware use?
107 parts, built around the STM32G030K8T6, LM2902, AZ1117CH-5.0TRG1 and LD29150DT33R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hexapod Hardware KiCad files?
From the putzio/Hexapod_2.0_Hardware repository on GitHub, at the commit this page was made from: the board is Hexapod_Hardware.kicad_pcb and its schematic GRIPPER_MCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hexapod Hardware design in my own project?
Its repository states no licence, so its author keeps all rights: ask putzio before reusing the design.