2 layers20 × 30 mm
2 layers20 × 72 mm
Wogglebug
smrl/wogglebug- Size
- 20 × 72 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 49
- Nets
- 38
- Pads
- 167
- Tracks, vias
- 556, 52
- Routed
- Yes
- KiCad
- KiCad 5 (file 20190905)
- Created
- 4 Dec 2023
- Updated
- 4 Dec 2023
Overview
Wogglebug is an open-source printed circuit board by smrl, from the smrl/wogglebug repository on GitHub. It is a 2-layer board of 20 × 72 mm with 49 parts on 38 nets, routed with 556 tracks and 52 vias.
It is built around the TSV6191ILT, TPS60400DBV and BAT54GW, with the MMDT3904 among its other parts. Its parts include 18 resistors, 11 capacitors, 4 ICs, 4 diodes and 3 connectors.
Main components
4
TSV6191ILT
SOT-23-5-40℃~+85℃ 1 1.5V~5.5V 10.5uA 105nV/√Hz@1kHz 10pA 1pA 2uV/℃ 450kHz 4mV 63mA 80V/ms 80dB Decompensated stable Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHSSTMicroelectronicsOperational AmplifierTPS60400DBV
SOT-23-5-40℃~+85℃ 1.6V~5.5V 15Ω 270uA 60mA 90% Inverted Support SOT-23-5 Charge Pumps ROHSTexas InstrumentsCharge PumpsBAT54GW
-- Diodes - General Purpose ROHSNexperiaDiodes - General Purpose
MMDT3904
SOT-363-55℃~+150℃ 100 2 NPN 200mA 200mV 200mW 300MHz 40V 50nA 6V NPN SOT-363 Bipolar (BJT) ROHSDiodes IncorporatedBipolar (BJT)
README
README.mdwogglebug
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R9, R10, R13, R15 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C2, C5, C6, C11 |
| 3 | 1M | Resistor_SMD:R_0603_1608Metric | R12, R16, R17 |
| 3 | 22k | Resistor_SMD:R_0603_1608Metric | R2, R7, R14 |
| 2 | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | R3, R5 | |
| 2 | .15u | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R8, R18 |
| 2 | 51k | Resistor_SMD:R_0603_1608Metric | R4, R6 |
| 1 | .01u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 1000p | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 1000uH | Inductor_SMD:L_1206_3216Metric | L1 |
| 1 | 100pF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 1F 3V | wogglebug:supercap | C8 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 470k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | AudioJack3 | Connector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J3 |
| 1 | BAT54GW | Diode_SMD:D_SOD-123 | D4 |
| 1 | C | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | Conn_01x08_Female | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical_SMD_Pin1Left | J2 |
| 1 | GREEN LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | INDUCTOR | wogglebug:board_inductor | L2 |
| 1 | LED | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm_Clear | D3 |
| 1 | MMDT3904 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | PICAXE14M2 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | RED LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | SW_DIP_x02 | wogglebug:tiltswitch | SW1 |
| 1 | Solar_Cell | solarcell:Solar Cell 3.3V 20x40mm | SC1 |
| 1 | Speaker | wogglebug:MagBuzzer | LS1 |
| 1 | TA7642 | Package_TO_SOT_THT:TO-92 | U1 |
| 1 | TPS60400 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | TSV6191ILT | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | TestPoint | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP1 |
| 1 | TestPoint_2Pole | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | TP2 |
The 48 most common of 49 parts.
Questions
How big is the Wogglebug PCB?
It measures 20 × 72 mm and has 2 copper layers, 0.8 mm thick.
What parts does the Wogglebug use?
49 parts, built around the TSV6191ILT, TPS60400DBV, BAT54GW and MMDT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wogglebug KiCad files?
From the smrl/wogglebug repository on GitHub, at the commit this page was made from: the board is wogglebug.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wogglebug design in my own project?
Its repository states no licence, so its author keeps all rights: ask smrl before reusing the design.
More from smrl/wogglebug
2- 2 layers20 × 40 mm
Similar boards
- 2 layers50 × 49 mm
- 4 layers220 × 170 mm
Arpeggiator
EwoudVV/arpeggiator
12-note analog arpeggiator with a 1/2/3 octave range, custom pcb and printed case
360 parts3 - 4 layers100 × 100 mm
- 4 layers138.2 × 200.4 mm
- 2 layers109.2 × 91.4 mm
FunctionGeneratorCortexM4
cracked-machine/FunctionGeneratorCortexM4_HW
A function generator powered by ARM Cortex M4
119 parts2MIT - 4 layers100 × 100 mm
Pcb AMY
Rivercraft911/R-01_Raster_Laser_Projector
Red, blue and green lasers combine through two dichroc mirrors and bounce off a spinning polygon mirror, which each mirror facet makes one scanline.
159 parts1 - 2 layers139 × 45 mm
Soil Power Sensor
jlab-sensing/ENTS-node-hardware
Schematics and design for soil MFC voltage and current sensing
72 parts - 2 layers187.5 × 45 mm
Gamma spectrometer
Motokichirou/gamma-spectrometer
NaI(Tl) gamma spectrometer: STM32G474 + R1307 PMT + 4-board stack, KiCad schematics, LTspice simulations
231 parts