2 layers262.5 × 107.9 mm
Commodore pet clone
DLehenbauer/commodore-pet-clone
Open hardware clone of the Commodore PET 4032
316 parts13CC0-1.0
2 layers85 × 46.3 mm
Power kit
smotesko/power-kit-PSU10Isolated switch mode power supply for Eurorack synth, ±12V and +5V outputs
- Size
- 85 × 46.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 13
- Pads
- 72
- Tracks, vias
- 172, 0
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 Sep 2017
- Updated
- 3 Sep 2017
Overview
Power kit is an open-source printed circuit board by smotesko, from the smotesko/power-kit-PSU repository on GitHub. It is a 2-layer board of 85 × 46.3 mm with 30 parts on 13 nets, routed with 172 tracks and 0 vias.
It is built around the NCS12D1212C, NCS12S1205C and HLMP-1641, with the 1N5240BTR, 51105C and CON-SOCJ-2155 among its other parts. Its parts include 11 capacitors, 4 diodes, 3 connectors, 2 ICs and 1 resistor. It belongs with the audio and music and power boards of this library.
Main components
8NCS12D1212C
-1.5kV 12V 12W 2 500mA 85% 9V~36V - Isolated Power Modules ROHSMurataIsolated Power Modules
NCS12S1205C
DIP,32x20mmDIP,32x20mm Isolated Power Modules ROHSMurataIsolated Power Modules
HLMP-1641
插件,D=3mm-20℃~+85℃ 1.6mcd 12V 13mA 3mm Round Lens 569nm 570nm 60° Discrete Diode Emerald Green Green Lens 插件,D=3mm LED Indication - Discrete ROHSBroadcom LimitedLED Indication - Discrete1N5240BTR
DO-204-65℃~+200℃ 1 Independent 10V 17Ω 3uA@8V 500mW 600Ω 9.5V~10.5V DO-204 Zener Diodes ROHSonsemiZener Diodes
51105C
--40℃~+125℃ 1mH 2 3.3A 38mΩ - Common Mode Filters ROHSMurataCommon Mode Filters
CON-SOCJ-2155
THrough holeTHroughhole New Arrivals ROHSGravitechUncategorised
HLMP-1600
插件,D=3mm-40℃~+85℃ 10mA 2.1mcd 3.17mm圆形灯头 5V 60° 626nm 632nm Red Red Lens 插件,D=3mm LED Indication - Discrete ROHSBroadcom LimitedLED Indication - Discrete
IRF4905PBF
TO-220AB-55℃~+175℃ 1 P-Channel 180nC@10V 200W 20mΩ@10V 3.4nF 4V 55V 640pF 74A P-Channel TO-220AB MOSFETs ROHSInfineon TechnologiesMOSFETs
README
README.mdIsolated switch mode power supply for Eurorack synth, ±12V and +5V outputs
See posts tagged "power-kit" for details.
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1 | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C4, C5, C10 |
| 3 | 10 | Capacitors_Tantalum_SMD:TantalC_SizeB_EIA-3528_HandSoldering | C6, C7, C11 |
| 2 | 0.01 | smotesko:CAP_TH_Radial_15x5_7.5mm | C8, C9 |
| 2 | HLMP-1641 | LEDs:LED-3MM | D1, D2 |
| 1 | 100k | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1 |
| 1 | 1984617 | Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2pol | P1 |
| 1 | 1984659 | Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_6pol | P2 |
| 1 | 1N5240BTR | Diodes_ThroughHole:Diode_DO-35_SOD27_Horizontal_RM10 | D4 |
| 1 | 47 | Capacitors_ThroughHole:C_Radial_D6.3_L11.2_P2.5 | C3 |
| 1 | 51105C | smotesko:Murata_inductor_5100_series | L1 |
| 1 | CON-SOCJ-2155 | Connect:BARREL_JACK | CON1 |
| 1 | HLMP-1600 | LEDs:LED-3MM | D3 |
| 1 | IRF4905PBF | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | Q1 |
| 1 | LOGO | smotesko:text-powerkit | G*** |
| 1 | LOGO | smotesko:text_smotesko.com | G*** |
| 1 | LOGO | smotesko:text_rev1 | G*** |
| 1 | NCS12D1212C | smotesko:Murata_NCS12_DC-DC | U1 |
| 1 | NCS12S1205C | smotesko:Murata_NCS12_DC-DC | U2 |
The 26 most common of 30 parts.
Similar boards
- 2 layers100 × 80 mm
Solid state relays 12v
dragon-mobile/solid_state_relays_12v
The Solid State Relays - 12Volts is an open hardware solid state relay PCB aimed at the tiny home, van life and maker communities.
98 parts3CC-BY-SA-4.0 - 2 layers125.1 × 90.2 mm
ESP32-BMS Ctrl
juepi/PIO-ESP32-BMS_Ctrl
Monitor and Controller for battery setups using Daly Smart BMS with Victron VE.Direct charger and shunt
44 parts3 - 4 layers147.3 × 78.1 mm
RC Car Design - Control On Board
cjg-1/FPV-RC-CAR
A wireless FPV control system for RC vehicles featuring real-time video transmission and custom embedded power management. Enables immersive first-person vehicle teleoperation with low-latency wireless architecture.
51 parts2 - 2 layers150 × 140 mm
Trueskate main v1
AsherNoble/trueskate-ai-hardware
Hand-control layer for TrueSkate-AI: the agent sends touch gestures, a robotic finger performs them. Teensy 4.1 + SimpleFOC firmware, Python host.
65 parts1MIT - 2 layers39.5 × 55.2 mm
- 4 layers90 × 56.5 mm
- 2 layers35 × 55 mm
Questions
How big is the Power kit PCB?
It measures 85 × 46.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power kit use?
30 parts, built around the NCS12D1212C, NCS12S1205C, HLMP-1641 and 1N5240BTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power kit KiCad files?
From the smotesko/power-kit-PSU repository on GitHub, at the commit this page was made from: the board is power-kit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power kit design in my own project?
Its repository states no licence, so its author keeps all rights: ask smotesko before reusing the design.