Skip to the content
2 layers35 × 55 mmUnderbed lighting, the printed circuit board in 3D

Underbed lighting

bsdlp/pwm-led-driver
Size
35 × 55 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
47
Pads
101
Tracks, vias
84, 5
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
26 Dec 2023
Updated
26 Dec 2023

Overview

Underbed lighting is an open-source printed circuit board by bsdlp, from the bsdlp/pwm-led-driver repository on GitHub. It is a 2-layer board of 35 × 55 mm with 20 parts on 47 nets, routed with 84 tracks and 5 vias.

It is built around the CON-SOCJ-2155, IRLB8721PBF and SRP1250-7R8M. Its parts include 2 resistors, 2 ICs, 2 connectors, 1 transistor and 1 inductor. It belongs with the lEDs and displays boards and the ESP32 boards of this library.

Main components

3

Parts

20
QtyValueFootprintReferences
1100nFCapacitor_SMD:CAPC1608X90NCinx1
1100nFCapacitor_SMD:CAPC1005X55NCboot1
110kΩResistor_SMD:RESC1005X40NRfbb1
110kΩResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2
110µFCapacitor_SMD:CAPC3216X180NCin1
11kΩResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1282837-22pole screw terminal:TE_282837-2P1
130.9kΩResistor_SMD:RESC1608X55NRfbt1
133nFCapacitor_SMD:CAPC1005X55NCss1
147pFCapacitor_SMD:CAPC0603X33NCff1
147µFCapacitor_SMD:CAPC3225X270NCout1
1CON-SOCJ-2155CON-SOCJ-2155:GRAVITECH_CON-SOCJ-2155J1
1ESP32-WROOM-32E_(16MB)ESP32-WROOM-32E__16MB_:XCVR_ESP32-WROOM-32E_(16MB)U1
1IRLB8721PBFdigikey-footprints:TO-220-3Q1
1SRP1250-7R8MInductor_SMD:SRP12507R8ML1
1TPS62932DRLRConverter_DCDC:TPS62932DRLRIC1

The 16 most common of 20 parts.

Similar boards

  • 4 layers135.1 × 56.9 mmAfterburner, the printed circuit board in 3D

    Afterburner

    CelestineOverflow/Afterburner_PCB

    PCBA Files

    144 partsGPL-3.0
  • 2 layers262.5 × 107.9 mmCommodore pet clone, the printed circuit board in 3D

    Commodore pet clone

    DLehenbauer/commodore-pet-clone

    Open hardware clone of the Commodore PET 4032

    316 parts13CC0-1.0
  • 2 layers85 × 46.3 mmPower kit, the printed circuit board in 3D

    Power kit

    smotesko/power-kit-PSU

    Isolated switch mode power supply for Eurorack synth, ±12V and +5V outputs

    30 parts10
  • 2 layers39.5 × 55.2 mmBreadboardPower, the printed circuit board in 3D

    BreadboardPower

    anijjar/Hardware

    PCB Design files

    17 partsMIT
  • 2 layers25 × 37 mmMotorDriver, the printed circuit board in 3D

    MotorDriver

    charbel2005/Embedded-Systems

    PCB Design and Embedded Systems

    20 parts
  • 10 layers90 × 60 mmZebra X, the printed circuit board in 3D

    Zebra X

    Dylanfg123/Zebra-X

    A Xilinx Zynq Demo Board based on Phil's Lab ZettBrett board

    424 parts
  • 10 layers95.3 × 71.4 mmZynq soc board v1, the printed circuit board in 3D

    Zynq soc board v1

    findasifrahman/zynq_soc_board_v1

    449 parts
  • 2 layers78.1 × 134.9 mmSterownik systemu nawadniania, the printed circuit board in 3D

    Sterownik systemu nawadniania

    mgmike1011/sterownik_systemu_nawadniania_PCB

    Projekt płytki drukowanej sterownika systemu nawadaniania w oparciu o STM32

    87 parts

Questions

How big is the Underbed lighting PCB?

It measures 35 × 55 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Underbed lighting use?

20 parts, built around the CON-SOCJ-2155, IRLB8721PBF and SRP1250-7R8M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Underbed lighting KiCad files?

From the bsdlp/pwm-led-driver repository on GitHub, at the commit this page was made from: the board is underbed-lighting.kicad_pcb and its schematic underbed-lighting.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Underbed lighting design in my own project?

Its repository states no licence, so its author keeps all rights: ask bsdlp before reusing the design.