Skip to the content
2 layers100 × 32 mmUps-5v, the printed circuit board in 3D

PCB designs

Size
100 × 32 mm
Copper layers
2
Thickness
1.6 mm
Parts
87
Nets
43
Pads
318
Tracks, vias
323, 77
Pours
19
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Mar 2024
Updated
11 Sep 2026

Overview

Ups-5v is an open-source printed circuit board by smkent, from the smkent/pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 100 × 32 mm with 87 parts on 43 nets, routed with 323 tracks and 77 vias.

It is built around the MT3608, ETA6003 and XB3306D, with the 1N5819WT, DMP1045U and SP2006KT5 among its other parts. Its parts include 23 resistors, 12 diodes, 9 capacitors, 6 connectors and 5 transistors. It belongs with the power boards of this library.

Main components

12

README

README.md

PCB designs

A monorepository of my PCB designs created with KiCAD 8.

Layout and Workflow

Custom symbols and footprints are located in libraries, which is shared between PCB projects using ${KIPRJMOD}.

Individual PCB projects (e.g. *.kicad_pro and friends) are located within within pcb for active projects, or pcb-archived for archived projects.

When a PCB is ordered from a project, fabrication outputs are created and in the project's fab subdirectory and committed to the repository.

Setup

Ensure pipx is installed:

sh
pip install pipx

Install scons:

sh
pipx install scons

Install KiCAD-related dependencies using the system site packages directory:

sh
pipx install --system-site-packages kikit interactivehtmlbom

Build

To render all outputs, simply run scons.

To render outputs for a particular board, run scons -u within that board's project subdirectory.

Licenses

Individual hardware designs in this repository may use different licenses. The following licenses apply unless an included design directory specifies different license(s).

The lcsc KiCAD symbols, footprints, and 3D models libraries were created using easyeda2kicad (pypi), which are from LCSC. More info about easyeda2kicad

Parts

87
QtyValueFootprintReferences
85K1Resistor_SMD:R_0603_1608MetricR3, R11, R14, R15, R16, R17, R20, R21
710KResistor_SMD:R_0603_1608MetricR1, R2, R6, R7, R8, R9, R13
31udiscrete:C_0603_1608MetricC2, C4, C6
3SW_SPDT_MountingPinelectromechanical:SW_SPDT_PCM12SW1, SW2, SW3
2100KResistor_SMD:R_0603_1608MetricR18, R19
210udiscrete:C_0603_1608MetricC5, C7
21N5819WTpackage:D_SOD-523D5, D6
222KResistor_SMD:R_0603_1608MetricR22, R23
268u/16VCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC8, C9
2DMP1045UPackage_TO_SOT_SMD:SOT-23Q1, Q2
2D_TVSDiode_SMD:D_SOD-882D2, D4
2JST SHconnector:JST_SH_SM02B-SRSS-TB_1x02-1MP_P1.00mm_HorizontalJ5, J6
2LOGOgraphics:icon-lightning-bolt-2mmG***, G***
2LOGOgraphics:icon-power-2mmG***, G***
2LOGOgraphics:icon-bell-2mmG***, G***
2Reddiscrete:LED_0603_1608MetricLED5, LED6
2SP2006KT5package:SOT-523Q4, Q5
2USB_C_Receptacle_PowerOnly_6Pconnector:USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal_HandSolderJ1, J2
1100RResistor_SMD:R_0603_1608MetricR12
110Vpackage:D_SOD-523D3
118650connector:BatteryHolder_1x18650_THTBT1
122udiscrete:C_0603_1608MetricC1
122udiscrete:C_0805_2012MetricC3
12K2Resistor_SMD:R_0603_1608MetricR4
12u2discrete:L_1008_2520MetricL1
1470RResistor_SMD:R_0603_1608MetricR5
14u7discrete:L_1008_2520MetricL2
175KResistor_SMD:R_0603_1608MetricR10
1BAT60Apackage:D_SOD-323D1
1ETA6003package:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm_ThermalVias_ETA6003U1
1G2N7002Xpackage:SOT-523Q3
1JST PHconnector:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_HorizontalJ4
1LOGOgraphics:wa-state-heart-8mmG***
1LOGOgraphics:qwiic-logo-5.5mmG***
1MAX17048package:TDFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.2mmU3
1MT3608Package_TO_SOT_SMD:SOT-23-6U4
1Qwiicconnector:Qwiic-SMD-horizontal-logoJ3
1SolderJumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1XB3306DPackage_TO_SOT_SMD:SOT-23U2
1XL-1606SURCdiscrete:LED_SideEmitter_1.7x1.1mmLED3
1XL-1606UBCdiscrete:LED_SideEmitter_1.7x1.1mmLED4
1XL-1606UGCdiscrete:LED_SideEmitter_1.7x1.1mmLED2
1XL-1606UWCdiscrete:LED_SideEmitter_1.7x1.1mmLED1

The 74 most common of 87 parts.

More from smkent/pcb

12
  • 2 layers100 × 66 mmEsp av, the printed circuit board in 3D

    Esp av

    smkent/pcb

    PCB designs

    160 partsCC-BY-SA-4.0
  • 2 layers82 × 40 mmEsp av, the printed circuit board in 3D

    Esp av

    smkent/pcb

    PCB designs

    106 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp rgb driver, the printed circuit board in 3D

    Esp rgb driver

    smkent/pcb

    PCB designs

    73 partsCC-BY-SA-4.0
  • 2 layers69 × 20 mmIp5209-ups, the printed circuit board in 3D

    Ip5209-ups

    smkent/pcb

    PCB designs

    67 partsCC-BY-SA-4.0
  • 2 layers16 × 32 mmReflow, the printed circuit board in 3D

    Reflow

    smkent/pcb

    PCB designs

    65 partsCC-BY-SA-4.0
  • 2 layers110 × 44 mmIp5306-ups, the printed circuit board in 3D

    Ip5306-ups

    smkent/pcb

    PCB designs

    64 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp-3dp, the printed circuit board in 3D

    Esp-3dp

    smkent/pcb

    PCB designs

    63 partsCC-BY-SA-4.0
  • 2 layers40 × 40 mmEsp-3dp, the printed circuit board in 3D

    Esp-3dp

    smkent/pcb

    PCB designs

    57 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp cwww, the printed circuit board in 3D

    Esp cwww

    smkent/pcb

    PCB designs

    55 partsCC-BY-SA-4.0
  • 2 layers40 × 40 mmEsp rgb driver, the printed circuit board in 3D

    Esp rgb driver

    smkent/pcb

    PCB designs

    52 partsCC-BY-SA-4.0

Similar boards

  • 4 layers85 × 120 mmGameboy, the printed circuit board in 3D

    Gameboy

    MeesCode/gameboy-pcb

    custom gameboy-esque pcb running an stm32 and my own tiny game engine

    134 parts
  • 2 layers61.5 × 100.3 mmStair lights, the printed circuit board in 3D

    Stair lights

    ogruendel/stair-lights

    80 parts
  • 4 layers80 × 60 mmTinynode, the printed circuit board in 3D

    Tinynode

    Stary2001/my-mesh-nodes

    Here's all my mesh stuff. Everything here is licensed under CERN OHL-P.

    67 parts2CERN-OHL-P-2.0
  • 4 layers12.2 × 50.4 mmCompass v1, the printed circuit board in 3D

    Compass v1

    mszkowalik/7S_Compass_v1_board

    BLE Long range + mesh? https://github.com/jnsbyr/nrf52-ble-test

    146 parts
  • 2 layers100 × 100 mmAaram, the printed circuit board in 3D

    Aaram

    xicor22/Aaram

    PCB design for retro fitting old switch boards with new tech to control it remotely.

    77 partsGPL-3.0
  • 2 layers88.9 × 50.8 mmInsert Coin Business Card, the printed circuit board in 3D

    Insert Coin Business Card

    PowerPlane/insert-coin

    The "Insert Coin" cards are PCB-as-business-card builds where the coin cell is the user interaction: slide it into the holder and the card boots, blinks, listens, taps NFC, then sleeps.

    44 parts1
  • 2 layers96 × 120.1 mmSide panel, the printed circuit board in 3D

    Side panel

    ToonVanEyck/OpenFlap

    The OpenFlap project aims to create a open source, affordable split-flap display for the makers and tinkerers of the world.

    43 parts98
  • 2 layers77.2 × 67.9 mmTransistor tester, the printed circuit board in 3D

    Transistor tester

    vitaliy-bobrov/avr-transistor-tester

    Component/Transistor tester based on famous AVR Transistor Tester

    66 parts12

Questions

How big is the Ups-5v PCB?

It measures 100 × 32 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ups-5v use?

87 parts, built around the MT3608, ETA6003, XB3306D and 1N5819WT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ups-5v KiCad files?

From the smkent/pcb repository on GitHub, at the commit this page was made from: the board is pcb/stackable3/ups-5v/ups-5v.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ups-5v design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).