
Esp neopixel driver
PCB designs
- Size
- 40 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 26
- Pads
- 123
- Tracks, vias
- 291, 98
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Mar 2024
- Updated
- 11 Sep 2026
Overview
Esp neopixel driver is an open-source printed circuit board by smkent, from the smkent/pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 40 × 40 mm with 27 parts on 26 nets, routed with 291 tracks and 98 vias.
It is built around the VEML7700-TT, 2N7002DW and FM-3510RGBA-SG. Its parts include 5 connectors, 4 diodes, 3 capacitors, 2 resistors and 1 IC. It belongs with the lEDs and displays boards of this library.
Main components
3VEML7700-TT
SMD-4P-25℃~+85℃ 120klx 16bit 2.35mm 2.5V~3.6V 3mm 6.8mm I2C Light Intensity Low power/sleep mode、Spectral correction/filtering、High dynamic range measurement、Adjustable gain control、Interrupt/event trigger、Built-in temperature compensation SMD-4P Ambient Light Sensors ROHSVishay IntertechnologyAmbient Light Sensors2N7002DW
SOT-363-50℃~+150℃ 1.9Ω@10V 12pF 2 N-Channel 2.5V 300mA 300mW 60V 650pC@30V SOT-363 MOSFETs ROHSGuangdong HottechMOSFETsFM-3510RGBA-SG
SMD,3.5x1.3mm-30℃~+85℃ 1.2mm 110° 1mm 3.5mm B:470nm、R:621nm、G:529nm Common Anode R:15mA、G:8mA、B:5mA R:2.1V、G:2.7V、B:2.7V R:445mcd、G:762mcd、B:104mcd R:60mW、G:90mW、B:90mW Side View Mount SMD,3.5x1.3mm RGB LEDs ROHSFoshan NationStar OptoelectronicsRGB LEDs
README
README.mdPCB designs
A monorepository of my PCB designs created with KiCAD 8.
Layout and Workflow
Custom symbols and footprints are located in libraries, which
is shared between PCB projects using ${KIPRJMOD}.
Individual PCB projects (e.g. *.kicad_pro and friends) are located within
within pcb for active projects, or
pcb-archived for archived projects.
When a PCB is ordered from a project, fabrication outputs are created and
in the project's fab subdirectory and committed to the repository.
Setup
Ensure pipx is installed:
pip install pipxInstall scons:
pipx install sconsInstall KiCAD-related dependencies using the system site packages directory:
pipx install --system-site-packages kikit interactivehtmlbomBuild
To render all outputs, simply run scons.
To render outputs for a particular board, run scons -u within that board's
project subdirectory.
Licenses
Individual hardware designs in this repository may use different licenses. The following licenses apply unless an included design directory specifies different license(s).
- Hardware materials and designs are licensed under CERN Open Hardware License version 2.0 Permissive (CERN-OHL-P v2) (text). The version control history of this repository serves as the changes file.
- Software is licensed under the GNU General Public License v3.0 (GPL-3.0) (text)
- All documentation is licensed under Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA-4.0) (text)
The lcsc KiCAD symbols,
footprints, and 3D models
libraries were created using easyeda2kicad
(pypi), which are from LCSC. More info about
easyeda2kicad
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_3.2mm_M3_Pad_Via_corner_compact | mechanical:MountingHole_3.2mm_M3_Pad_Via_corner_compact | MH_NE, MH_NW, MH_SE, MH_SW |
| 3 | LED_Small | discrete:LED_0603_1608Metric | LED1, LED2, LED3 |
| 2 | 1000u | Capacitor_SMD:CP_Elec_8x10 | C1, C2 |
| 2 | 10K | discrete:R_Array_Convex_4x0603_HandSolder | RN1, RN3 |
| 2 | 300R | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | STEMMA-Signal | connector:STEMMA-Signal-SMD-horizontal | J1, J2 |
| 1 | 22u | discrete:C_0603_1608Metric | C0 |
| 1 | 2N7002DW | package:SOT-363_SC-70-6_HandSolder | Q2 |
| 1 | 5K1 | discrete:R_Array_Convex_4x0603_HandSolder | RN2 |
| 1 | FM-3510RGBA-SG | discrete:LED_RGB_FM-3510RGBA-SG_3.5x1.3mm | LED0 |
| 1 | JST PH | connector:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J5 |
| 1 | JST SH | connector:JST_SH_SM05B-SRSS-TB_1x05-1MP_P1.00mm_Horizontal | J6 |
| 1 | LOGO | graphics:wa-state-heart-5mm | G*** |
| 1 | Qwiic | connector:Qwiic-SMD-horizontal-logo | J3 |
| 1 | VEML7700 | discrete:Sensor_VEML7700-TR | U3 |
| 1 | ~ | module:ESP32-C3-Super-Mini-Castellated-SMD-only | SM1 |
The 25 most common of 27 parts.
More from smkent/pcb
12- 2 layers100 × 66 mm

- 2 layers82 × 40 mm

- 2 layers100 × 32 mm

- 2 layers40 × 40 mm

- 2 layers40 × 40 mm

- 2 layers66 × 32 mm

- 2 layers69 × 20 mm

- 2 layers16 × 32 mm

- 2 layers110 × 44 mm

- 2 layers66 × 32 mm

- 2 layers40 × 40 mm

- 2 layers66 × 32 mm

Similar boards
- 2 layers48.7 × 44.9 mm

Esp32-crystal ball
atomic14/esp32-crystal-balls
This PCB is now supporting two of my projects: Crystal Balls and my Flame Lamp.
54 parts10 - 6 layers34 × 56 mm

- 2 layers130 × 110 mm

- 2 layers23.8 × 38.8 mm

- 2 layers35.6 × 94.6 mm

- 2 layers76.8 × 23.5 mm

SommerESP
exico91/SommerESP
A plug and play ESP32-C3 board to control Sommer garage doors
41 parts29MIT - 2 layers391 × 131.1 mm

- 4 layers99.9 × 69.9 mm

Questions
How big is the Esp neopixel driver PCB?
It measures 40 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp neopixel driver use?
27 parts, built around the VEML7700-TT, 2N7002DW and FM-3510RGBA-SG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp neopixel driver KiCad files?
From the smkent/pcb repository on GitHub, at the commit this page was made from: the board is pcb-archived/stackable2/esp-neopixel-driver/esp-neopixel-driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp neopixel driver design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).