

ESP32-iPod BLE
Click the link above to see the details.
- Size
- 23.8 × 38.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 51
- Pads
- 155
- Tracks, vias
- 339, 66
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Apr 2025
- Updated
- 25 Apr 2025
Overview
ESP32-iPod BLE is an open-source printed circuit board by maxmacstn, from the maxmacstn/iPod-Classic-6-mods repository on GitHub. It is a 2-layer board of 23.8 × 38.8 mm with 22 parts on 51 nets, routed with 339 tracks and 66 vias.
It is built around the PCM1860DB and 2N7002DW. Its parts include 8 capacitors, 4 ICs, 2 resistors, 2 connectors and 1 diode. It belongs with the radio and wireless boards and the ESP32 boards of this library.
Main components
2PCM1860DB
TFSOP-30-175mil-40℃~+125℃ 192kHz 2 24 3V~3.6V Audio Analog-to-Digital Converter Built-in I2S TFSOP-30-175mil ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special Purpose2N7002DW
SOT-363-50℃~+150℃ 1.9Ω@10V 12pF 2 N-Channel 2.5V 300mA 300mW 60V 650pC@30V SOT-363 MOSFETs ROHSGuangdong HottechMOSFETs
README
README.md
iPod Classic Mods
My attempt at modernizing the iPod Classic (6th generation) includes the following:
-
USB-C Mod – Converts the 30-pin dock connector to a USB-C interface.
-
Bluetooth Audio Mod – Enables audio transmission to headphones or speakers via Bluetooth, with playback control.
-
Taptic Engine – Replaces the clicking sound (from the buzzer) with haptic feedback. There are a bunch of videos out there on how to do this mod, so I haven’t included it in this repo. I used a Taptic Engine from an iPhone 11 Plus. It's small and provides a nice, firm vibration.
Click the link above to see the details.
Video : Youtube (TH)
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C7, C8 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10K | Resistor_SMD:R_Array_Convex_4x0603 | RN1 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 2N7002DW | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U4 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x09_Socket | Connector_JST:JST_ZH_S9B-ZR-SM4A-TF_1x09-1MP_P1.50mm_Horizontal | J1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | ENA_USING_1V8_RAIL | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | ENA_USING_ESP_CLK | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP6 |
| 1 | ESP32-WROOM-E | PCM_Espressif:ESP32-WROOM-32E | U2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LED_EXT | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | PCM1860 | Package_SO:TSSOP-30_4.4x7.8mm_P0.5mm | U3 |
| 1 | TLV76733DRVx | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | U1 |
More from maxmacstn/iPod-Classic-6-mods
3- 2 layers21.4 × 37.6 mm

- 2 layers21.6 × 6.5 mm

- 2 layers17.9 × 11 mm

Similar boards
- 2 layers35.6 × 94.6 mm

- 2 layers76.8 × 23.5 mm

SommerESP
exico91/SommerESP
A plug and play ESP32-C3 board to control Sommer garage doors
41 parts29MIT - 2 layers391 × 131.1 mm

- 4 layers99.9 × 69.9 mm

- 4 layers95.9 × 90.2 mm

SFUSat Radio
SFUSatClub/CubeSat-Radio
Cubesat comms module designed for the Canadian Satellite Design Challenge
281 parts9 - 4 layers60 × 40 mm

Ftx
SETIatHCRO/Front-Page
Documentation related to the Allen Telescope Array at the Hat Creek Radio Observatory Wiki Link Below
153 parts5 - 4 layers233.4 × 147.3 mm

OpenPLC Hardware
gasiepgodoy/Open-Source-PLC
Open Source Programmable Logic Controller (Hardware and Software). Based on the Master of Science in Electrical Engineering of João Vitor Rocha Santana
494 parts2 - 2 layers65 × 58 mm

Questions
How big is the ESP32-iPod BLE PCB?
It measures 23.8 × 38.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32-iPod BLE use?
22 parts, built around the PCM1860DB and 2N7002DW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-iPod BLE KiCad files?
From the maxmacstn/iPod-Classic-6-mods repository on GitHub, at the commit this page was made from: the board is Mods/ESP32-Bluetooth-Audio/PCB/kicad/Line out version/ESP32-iPod-BLE.kicad_pcb and its schematic Mods/ESP32-Bluetooth-Audio/PCB/kicad/I2S version/ESP32-iPod-BLE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-iPod BLE design in my own project?
Its repository states no licence, so its author keeps all rights: ask maxmacstn before reusing the design.