Skip to the content
2 layers16.5 × 17.8 mmEsp doorbell button, the printed circuit board in 3D

Esp doorbell button

smkent/pcb

PCB designs

Size
16.5 × 17.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
16
Pads
65
Tracks, vias
148, 15
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
22 Mar 2024
Updated
11 Sep 2026

Overview

Esp doorbell button is an open-source printed circuit board by smkent, from the smkent/pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 16.5 × 17.8 mm with 15 parts on 16 nets, routed with 148 tracks and 15 vias.

It is built around the WS2811F, DS8242-50SS3 and ME6211C33M5G-N, with the BSS84 and G1NP02LLE among its other parts. Its parts include 4 ICs, 3 transistors, 3 connectors and 1 resistor. It belongs with the home automation and IoT boards of this library.

Main components

5

README

README.md

PCB designs

A monorepository of my PCB designs created with KiCAD 8.

Layout and Workflow

Custom symbols and footprints are located in libraries, which is shared between PCB projects using ${KIPRJMOD}.

Individual PCB projects (e.g. *.kicad_pro and friends) are located within within pcb for active projects, or pcb-archived for archived projects.

When a PCB is ordered from a project, fabrication outputs are created and in the project's fab subdirectory and committed to the repository.

Setup

Ensure pipx is installed:

sh
pip install pipx

Install scons:

sh
pipx install scons

Install KiCAD-related dependencies using the system site packages directory:

sh
pipx install --system-site-packages kikit interactivehtmlbom

Build

To render all outputs, simply run scons.

To render outputs for a particular board, run scons -u within that board's project subdirectory.

Licenses

Individual hardware designs in this repository may use different licenses. The following licenses apply unless an included design directory specifies different license(s).

The lcsc KiCAD symbols, footprints, and 3D models libraries were created using easyeda2kicad (pypi), which are from LCSC. More info about easyeda2kicad

Parts

15
QtyValueFootprintReferences
2BSS84package:SOT-23Q1, Q2
110KResistor_SMD:R_Array_Convex_4x0603RN1
110KResistor_SMD:R_0603_1608MetricR5
1DS8242-50SS3package:SOT-23U2
1G1NP02LLEpackage:SOT-23-6Q3
1JST XHConnector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ3
1LOGOgraphics:oshw-logo-1.5mmG***
1LOGOgraphics:wa-state-heart-3mmG***
1LOGOgraphics:oshw-logo-3mmG***
1ME6211C33M5package:SOT-23-5U4
1Pin Headerscustom:PinHeader_2x02_P2.54mm_Vertical_simpleJ4
1Pin headerscustom:PinHeader_1x04_P2.54mm_Vertical_simpleJ1
1WS2811Fpackage:FSOP-8_3.3x1.7mm_P0.80mmU1
1~Package_SON:Texas_X2SON-4_1x1mm_P0.65mmU3

More from smkent/pcb

12
  • 2 layers100 × 66 mmEsp av, the printed circuit board in 3D

    Esp av

    smkent/pcb

    PCB designs

    160 partsCC-BY-SA-4.0
  • 2 layers82 × 40 mmEsp av, the printed circuit board in 3D

    Esp av

    smkent/pcb

    PCB designs

    106 partsCC-BY-SA-4.0
  • 2 layers100 × 32 mmUps-5v, the printed circuit board in 3D

    Ups-5v

    smkent/pcb

    PCB designs

    87 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp rgb driver, the printed circuit board in 3D

    Esp rgb driver

    smkent/pcb

    PCB designs

    73 partsCC-BY-SA-4.0
  • 2 layers69 × 20 mmIp5209-ups, the printed circuit board in 3D

    Ip5209-ups

    smkent/pcb

    PCB designs

    67 partsCC-BY-SA-4.0
  • 2 layers16 × 32 mmReflow, the printed circuit board in 3D

    Reflow

    smkent/pcb

    PCB designs

    65 partsCC-BY-SA-4.0
  • 2 layers110 × 44 mmIp5306-ups, the printed circuit board in 3D

    Ip5306-ups

    smkent/pcb

    PCB designs

    64 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp-3dp, the printed circuit board in 3D

    Esp-3dp

    smkent/pcb

    PCB designs

    63 partsCC-BY-SA-4.0
  • 2 layers40 × 40 mmEsp-3dp, the printed circuit board in 3D

    Esp-3dp

    smkent/pcb

    PCB designs

    57 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp cwww, the printed circuit board in 3D

    Esp cwww

    smkent/pcb

    PCB designs

    55 partsCC-BY-SA-4.0

Similar boards

  • 4 layers80 × 108 mmBmcv, the printed circuit board in 3D

    Bmcv

    Bemeier/bmcv

    Macro CV controller for eurorack inspired by the Emblematic Systems Catalyst

    373 parts7CC-BY-SA-4.0
  • 2 layers87.8 × 59.8 mmFreeDeck SMD 2020-02, the printed circuit board in 3D

    FreeDeck SMD 2020-02

    FreeYourStream/freedeck-hardware

    all the stuff you need to build your own FreeDeck

    37 parts772
  • 2 layers83.2 × 40 mmSmartdisplay, the printed circuit board in 3D

    Smartdisplay

    BearLaboratory/smartdisplay-hardware

    2.9寸墨水屏个人显示终端硬件显示

    46 parts175GPL-3.0
  • 2 layers35.4 × 27 mmWifiaudio, the printed circuit board in 3D

    Wifiaudio

    BearLaboratory/wifiaudio-tx-hardware

    WiFi无线麦克风硬件pcb设计

    29 parts110GPL-3.0
  • 4 layers50 × 50 mmHSCanT, the printed circuit board in 3D

    HSCanT

    cherry-embedded/HSCanT-hardware

    HSCanT is a USB to 4-channel CAN FD tool designed based on the HPM5321 chip.

    130 parts52Apache-2.0
  • 4 layers72.4 × 44.4 mmBtmdpcb v04 eval, the printed circuit board in 3D

    Btmdpcb v04 eval

    17o2/bluetooth-minidisc

    Adding built-in bluetooth connectivity to a 20-year-old Mindisc player

    115 parts45
  • 2 layers69.8 × 40.4 mmT Piece Kicad, the printed circuit board in 3D

    T Piece Kicad

    calebmarting/os2026-badge

    Schematics and firmware for the Open Sauce 2026 Badge and SAOs

    82 parts23MIT
  • 2 layers76.6 × 141.1 mmOniondao badge, the printed circuit board in 3D

    Oniondao badge

    OnionDAO-git/oniondao-badge

    An open-source, hacker-conference-style electronic badge built around the ESP32-S3-WROOM-1-N8R8 (8 MB flash + 8 MB Octal PSRAM), with swappable RF / audio / storage modules, an e-paper (or TFT) display socket, a secure…

    190 parts17

Questions

How big is the Esp doorbell button PCB?

It measures 16.5 × 17.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp doorbell button use?

15 parts, built around the WS2811F, DS8242-50SS3, ME6211C33M5G-N and BSS84. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp doorbell button KiCad files?

From the smkent/pcb repository on GitHub, at the commit this page was made from: the board is pcb-archived/jigs/esp-doorbell-button/esp-doorbell-button.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp doorbell button design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).