Skip to the content
2 layers15.7 × 20.8 mmDip adapters, the printed circuit board in 3D

Dip adapters

smkent/pcb

PCB designs

Size
15.7 × 20.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
17
Pads
72
Tracks, vias
87, 4
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
22 Mar 2024
Updated
11 Sep 2026

Overview

Dip adapters is an open-source printed circuit board by smkent, from the smkent/pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 15.7 × 20.8 mm with 15 parts on 17 nets, routed with 87 tracks and 4 vias.

It is built around the 1EDN7550B, TP4056 and XB6366D, with the AO3401A among its other parts. Its parts include 3 ICs, 2 capacitors, 2 resistors, 2 diodes and 2 transistors. It belongs with the interfaces and adapters boards of this library.

Main components

4

README

README.md

PCB designs

A monorepository of my PCB designs created with KiCAD 8.

Layout and Workflow

Custom symbols and footprints are located in libraries, which is shared between PCB projects using ${KIPRJMOD}.

Individual PCB projects (e.g. *.kicad_pro and friends) are located within within pcb for active projects, or pcb-archived for archived projects.

When a PCB is ordered from a project, fabrication outputs are created and in the project's fab subdirectory and committed to the repository.

Setup

Ensure pipx is installed:

sh
pip install pipx

Install scons:

sh
pipx install scons

Install KiCAD-related dependencies using the system site packages directory:

sh
pipx install --system-site-packages kikit interactivehtmlbom

Build

To render all outputs, simply run scons.

To render outputs for a particular board, run scons -u within that board's project subdirectory.

Licenses

Individual hardware designs in this repository may use different licenses. The following licenses apply unless an included design directory specifies different license(s).

The lcsc KiCAD symbols, footprints, and 3D models libraries were created using easyeda2kicad (pypi), which are from LCSC. More info about easyeda2kicad

Parts

15
QtyValueFootprintReferences
21KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
2AO3401APackage_TO_SOT_SMD:SOT-23Q1, Q2
2CCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
2Conn_01x08custom:PinHeader_1x08_P2.54mm_Vertical_simpleJ1, J2
2LEDcustom:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder_simpleLED1, LED2
2PolyfuseFuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolderF1, F2
11EDN7550BPackage_TO_SOT_SMD:SOT-23-6U2
1TP4056custom:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias_CustomVias_LargeU1
1XB6366Dcustom:DFN-6_L2.0-W2.0-P0.65-BL-EP_ThermalVias_HandSolderU3

More from smkent/pcb

12
  • 2 layers100 × 66 mmEsp av, the printed circuit board in 3D

    Esp av

    smkent/pcb

    PCB designs

    160 partsCC-BY-SA-4.0
  • 2 layers82 × 40 mmEsp av, the printed circuit board in 3D

    Esp av

    smkent/pcb

    PCB designs

    106 partsCC-BY-SA-4.0
  • 2 layers100 × 32 mmUps-5v, the printed circuit board in 3D

    Ups-5v

    smkent/pcb

    PCB designs

    87 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp rgb driver, the printed circuit board in 3D

    Esp rgb driver

    smkent/pcb

    PCB designs

    73 partsCC-BY-SA-4.0
  • 2 layers69 × 20 mmIp5209-ups, the printed circuit board in 3D

    Ip5209-ups

    smkent/pcb

    PCB designs

    67 partsCC-BY-SA-4.0
  • 2 layers16 × 32 mmReflow, the printed circuit board in 3D

    Reflow

    smkent/pcb

    PCB designs

    65 partsCC-BY-SA-4.0
  • 2 layers110 × 44 mmIp5306-ups, the printed circuit board in 3D

    Ip5306-ups

    smkent/pcb

    PCB designs

    64 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp-3dp, the printed circuit board in 3D

    Esp-3dp

    smkent/pcb

    PCB designs

    63 partsCC-BY-SA-4.0
  • 2 layers40 × 40 mmEsp-3dp, the printed circuit board in 3D

    Esp-3dp

    smkent/pcb

    PCB designs

    57 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp cwww, the printed circuit board in 3D

    Esp cwww

    smkent/pcb

    PCB designs

    55 partsCC-BY-SA-4.0

Similar boards

  • 2 layers66.5 × 83.9 mmInkWordESP32 MB V1.1, the printed circuit board in 3D

    InkWordESP32 MB V1.1

    harry10086/InkWord_ESP32

    An ESP32 and E-paper based low-power English vocabulary learning device.一个基于 ESP32 和墨水屏的低功耗英语单词学习设备。

    103 partsGPL-3.0
  • 4 layers54.3 × 38.5 mmProtectionGateDriver, the printed circuit board in 3D

    ProtectionGateDriver

    macnamtran/ProtectionGateDriver

    48 V wheel power switch and gate-driver design

    26 parts
  • 6 layers71.5 × 62.9 mmSensorboard backport, the printed circuit board in 3D

    Sensorboard backport

    CameraNexus/sitina1

    Open-source 35mm full-frame (36mm x 24mm) CCD mirror-less interchangable lens camera (MILC). The original goal of this project was to create a digital camera back to convert SLR cameras to DSLR cameras, but has since…

    391 parts82MIT
  • 6 layers64.8 × 69.9 mmEzDV, the printed circuit board in 3D

    EzDV

    tmiw/ezDV

    A FreeDV device based on the ESP32.

    130 parts114
  • 4 layers138.1 × 104.6 mmV7-kaleido, the printed circuit board in 3D

    V7-kaleido

    vroland/epdiy-hardware

    Hardware design files for EPDiy: https://github.com/vroland/epdiy.

    140 parts75CC-BY-SA-4.0
  • 2 layers230 × 85 mmLe chiff ble hotswap, the printed circuit board in 3D

    Le chiff ble hotswap

    MangoIV/le_chiff_ble

    A drop-in replacement-PCB for the beautiful le_chiffre

    117 parts52GPL-3.0
  • 2 layers79.8 × 89.3 mmKicad sailframes b1, the printed circuit board in 3D

    Kicad sailframes b1

    sailframes/core

    Open-source sailboat racing data logger and analytics platform.

    72 parts8
  • 2 layers35 × 100 mmWalkieTalkie, the printed circuit board in 3D

    WalkieTalkie

    GuzziFlipFlops/ESP32-Walkie-Talkie

    An open source ESPNOW based walkie talkie with a 600 meter tested distance, with an OLED and multiple buttons to interact with

    66 parts7MIT

Questions

How big is the Dip adapters PCB?

It measures 15.7 × 20.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dip adapters use?

15 parts, built around the 1EDN7550B, TP4056, XB6366D and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dip adapters KiCad files?

From the smkent/pcb repository on GitHub, at the commit this page was made from: the board is pcb-archived/jigs/dip-adapters/dip-adapters.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dip adapters design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).