

InputSwitch
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 99
- Nets
- 76
- Pads
- 267
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 4 Aug 2026
- Updated
- 6 Nov 2026
Overview
InputSwitch is an open-source printed circuit board by smileym4n-collab, from the smileym4n-collab/Kicadprojects repository on GitHub. It is a 2-layer board with 99 parts on 76 nets.
It is built around the ATTINY412-SSN, R-78E5.0-0.5 and LM358N, with the VO617A-3, SN74LVC1G04DBV and BZX55C5V1 among its other parts. Its parts include 36 resistors, 21 capacitors, 10 diodes, 10 connectors and 9 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
8ATTINY412-SSN
SOIC-8-40℃~+105℃ 1.8V~5.5V 10bit 128Byte 20MHz 256Byte 4KB 6 8 Bit 8bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)R-78E5.0-0.5
SIP,11.5x7.6mm-300mA、500mA -5V、5V 1 330uF、680uF 6.5V~36V、7V~31V 81%、90% Buck Short Circuit Protection SIP,11.5x7.6mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesLM358N
DIP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 30mA 3V~36V 50nA 7mV 800uA 80dB Built-in compensation DIP-8 Operational Amplifier ROHSHGSEMIOperational AmplifierVO617A-3
DIP-4-55℃~+110℃ 1 1.35V 100% 15us 200% 200mW 250mV@5mA,1mA 4.6us 5.3kV 50mA 60mA 6V 80V AC,DC Phototransistor DIP-4 Transistor, Photovoltaic Output Optoisolators ROHSVishay IntertechnologyTransistor, Photovoltaic Output OptoisolatorsSN74LVC1G04DBV
SOT-23-5-40℃~+125℃ 1 1 1.65V~5.5V 1.7V~2V 10uA 2.4V 3.7ns@5V,50pF 32mA 32mA 400mV 700mV~800mV 74LVC 电源关断保护 SOT-23-5 Inverters ROHSTexas InstrumentsInvertersBZX55C5V1
DO-351 Independent 100nA 35Ω 4.8V~5.4V 5.1V 500mW 550Ω DO-35 Zener Diodes ROHSSTMicroelectronicsZener DiodesSMBJ13A
DO-214AA(SMB)-55℃~+150℃ 13V 15.9V 21.5V 27.91A@10/1000us 5uA 600W@10/1000us IEC 61000-4-2 TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
99| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R25, R28, R31, R43, R45, R48, R51 |
| 6 | 100n / 50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C7, C9, C22, C42 |
| 5 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R26, R33, R46, R53 |
| 5 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5, R10 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27, R30, R47, R50 |
| 4 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D21, D22, D41, D42 |
| 4 | 33u / 16V | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C23, C25, C43, C45 |
| 4 | M4 | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4 |
| 3 | 10u / 50V X7R | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C20, C40 |
| 3 | G6K-2P-Y DC5 | Relay_THT:Relay_DPDT_Omron_G6K-2P-Y | K1, K2, K3 |
| 2 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21, R41 |
| 2 | 100n FILM / 50V | Capacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C24, C44 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29, R49 |
| 2 | 1k2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22, R42 |
| 2 | 1k2 / 0.5W | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R20, R40 |
| 2 | 1k8 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R32, R52 |
| 2 | 470k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24, R44 |
| 2 | 47u / 25V | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C21, C41 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
| 2 | BC549 | Package_TO_SOT_THT:TO-92_Inline | Q2, Q3 |
| 2 | BZX55C5V1 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D20, D40 |
| 2 | LM358N | Package_DIP:DIP-8_W7.62mm | U5, U7 |
| 2 | VO617A-3 | Package_DIP:DIP-4_W7.62mm | U6, U8 |
| 1 | +12V | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
| 1 | +5V | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP2 |
| 1 | 100u / 35V | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 12V DC INPUT | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | 1u / 25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 2u2 / 25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 47u / 16V | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | ATtiny412-SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | AV | LED_THT:LED_D3.0mm | D3 |
| 1 | AV L | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | AV R | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | G7L COIL ONLY | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J10 |
| 1 | GND | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3 |
| 1 | P3A L | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | P3A R | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | R-78E5.0-0.5 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U1 |
| 1 | REFERENCE | LED_THT:LED_D3.0mm | D4 |
| 1 | REFERENCE L | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | REFERENCE R | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | SMBJ13A | Diode_SMD:D_SMB | D2 |
| 1 | SN74LVC1G04DBV | Package_TO_SOT_SMD:SOT-23-5 | U9 |
| 1 | SPDT: REF / COM / AV | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J9 |
| 1 | SS14 | Diode_SMD:D_SMA | D1 |
| 1 | T500mA | Fuse:Fuseholder_Cylinder-5x20mm_Bulgin_FX0457_Horizontal_Closed | F1 |
| 1 | ULN2003A (12V COIL) | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | ULN2003A (5V COILS) | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | UPDI / +5V / GND | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J8 |
More from smileym4n-collab/Kicadprojects
12- 2 layers100 × 150 mm

- 4 layers100 × 100 mm

- 4 layers163.5 × 99.1 mm

- 4 layers100 × 100 mm

- 2 layers150 × 110 mm

- 2 layers162 × 107.4 mm

- 4 layers100 × 70 mm

- 4 layers90 × 90 mm

- 2 layers100 × 80 mm

- 2 layers120 × 120 mm

- 2 layers81 × 85 mm

- 4 layers94.2 × 69.7 mm

Similar boards
- 2 layers120 × 90 mm

- 4 layers195 × 58 mm

Ezo pmp controller
dephekt/dosing-pump-hardware
Open schematics and design files for a computer controlled nutrient dosing system
83 partsCERN-OHL-S-2.0 - 4 layers100 × 75 mm

- 2 layers93.2 × 82 mm

Pramac carrier
4106677/pramac-pmd5050s-autostart
Автозапуск дизель-генератора Pramac PMD5050S на ESP32 (ESPHome) + Home Assistant
47 parts - 2 layers110 × 100 mm

- 2 layers150 × 100 mm

Dual current mirror
Polymorphic548/EDC_project
This directory contains the KiCad implementation of the diode-compensated current mirror: a reusable circuit and a 150 x 100 mm panel containing two isolated copies.
36 partsMIT - 2 layers104 × 104 mm

Mppt
MadsRudolph/62768-energy-system
Team project for 62768 Electrical Energy Systems (DTU, June 2026, 3-week course). We design and build a complete electrical energy system per the course requirement spec (Kravspecifikation), from idea to a working…
21 parts - 2 layers110 × 60 mm

Questions
What parts does the InputSwitch use?
99 parts, built around the ATTINY412-SSN, R-78E5.0-0.5, LM358N and VO617A-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the InputSwitch KiCad files?
From the smileym4n-collab/Kicadprojects repository on GitHub, at the commit this page was made from: the board is InputSwitch/review/pre-spu03-2026-10-01/InputSwitch.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the InputSwitch design in my own project?
Its repository states no licence, so its author keeps all rights: ask smileym4n-collab before reusing the design.