

InputSwitch
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 65
- Pads
- 127
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 4 Aug 2026
- Updated
- 6 Nov 2026
Overview
InputSwitch is an open-source printed circuit board by smileym4n-collab, from the smileym4n-collab/Kicadprojects repository on GitHub. It is a 2-layer board with 42 parts on 65 nets.
It is built around the ATTINY412-SSN, LM358 and G6K-2P-Y DC3, with the SDT-S-112DMR601 among its other parts. Its parts include 14 resistors, 7 capacitors, 5 connectors, 4 diodes and 4 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATTINY412-SSN
SOIC-8-40℃~+105℃ 1.8V~5.5V 10bit 128Byte 20MHz 256Byte 4KB 6 8 Bit 8bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierG6K-2P-Y DC3
DIP,10x6.5mm-40℃~+70℃ 100mW 100mΩ 1A 300mA@125VAC、1A@30VDC 3V 3ms 3ms 60V@DC、125V@AC 91Ω Silver+gold alloy Two groups of conversions: 2C(Double-pole double-throw conversion) DIP,10x6.5mm Signal Relays ROHSOmronSignal RelaysSDT-S-112DMR601
插件Power RelaysTE Connectivity
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R10, R11, R12, R14 |
| 5 | 33uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4, C5, C6, C7, C8 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R13 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4 |
| 3 | G6K-2P-Y_DC3 | G6K:RELAY_G6K-2P-Y_DC3 | K2, K3, K4 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2, D5 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 10M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 10R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
| 1 | 2K2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 2N7000 | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q1 |
| 1 | 47nF | Capacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C2 |
| 1 | 5.1VZ | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D4 |
| 1 | 560R | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R4 |
| 1 | ATtiny412-SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | AUDIO IN | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | BC549 | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q2 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | Marantz In | Custom:phono | J6 |
| 1 | Out | Custom:phono | J8 |
| 1 | PreAmp in | Custom:phono | J7 |
| 1 | SDT-S-112DMR | Relay_THT:Relay_SPST_Omron_G2RL-1A | K1 |
| 1 | SWITCHED LIVE | Spade connector:TE_62409-1 | J5 |
More from smileym4n-collab/Kicadprojects
12- 2 layers100 × 150 mm

- 4 layers100 × 100 mm

- 4 layers163.5 × 99.1 mm

- 4 layers100 × 100 mm

- 2 layers150 × 110 mm

- 2 layers162 × 107.4 mm

- 4 layers100 × 70 mm

- 4 layers90 × 90 mm

- 2 layers100 × 80 mm

- 2 layers120 × 120 mm

- 2 layers81 × 85 mm

- 4 layers94.2 × 69.7 mm

Similar boards
- 2 layers24 × 17 mm

Power atiny v2
fijam/md-lpm
This project consists of hardware files and software for a coin-battery operated laser tester that fits in a MiniDisk case.
17 parts14 - 2 layers100 × 22 mm

- 2 layers26.1 × 31.4 mm

QC Hack wPins
Fab-Lab-Island/fli-bootcamp-2025
About Fab Lab ísland bootcamp Húsavík 2025. Kíkið á síðuna fyrir neðan!
15 parts2 - 2 layers

Pcb actionneur ventouse
Brasseur2robot/Les-brasseurs-d-idees
Codebase de l'équipe légende des brasseurs d'idées concourant à la coupe de France de robotique. Vous pouvez y retrouver les différents fichiers utilisés pour la création et le fonctionnement de notre robot principal et…
25 parts1GPL-3.0 - 4 layers98 × 98 mm

IGEM melty
SreeniEadara/Hopkins-iGEM-2022-electrical
Schematics and PCB designs for Hopkins iGEM 2022
64 parts1 - 2 layers58 × 29.5 mm

Attiny412 addressable
user-will/cursedPCB
A quick start guide and related files for the Cursed PCB by Reil Industrial
35 parts1 - 2 layers24.2 × 24.1 mm

- 2 layers175 × 85 mm

Gain box psu pcb
carmisergio/denon-preout-mod
PCB designs and firmware for the Denon AVR-X1300W Pre-out mod
80 parts
Questions
What parts does the InputSwitch use?
42 parts, built around the ATTINY412-SSN, LM358, G6K-2P-Y DC3 and SDT-S-112DMR601. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the InputSwitch KiCad files?
From the smileym4n-collab/Kicadprojects repository on GitHub, at the commit this page was made from: the board is InputSwitch/review/original-2026-10-01/InputSwitch.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the InputSwitch design in my own project?
Its repository states no licence, so its author keeps all rights: ask smileym4n-collab before reusing the design.