2 layers80 × 48.8 mm
ESP8266-Sentinel Kinetic Wired Remote
alextrical/ESP8266-Sentinel-Kinetic-Wired-Remote
ESP8266 based Re-implementation of the Vent-Axia Sentinel Kinetic Wired Remote Controller
48 parts4CERN-OHL-S-2.0
2 layers35.6 × 31.5 mm
Esp to rs3232
smarthomefans/RS232toESP2Hardware module convert RS232 to wifi UDP
- Size
- 35.6 × 31.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 21
- Pads
- 100
- Tracks, vias
- 164, 20
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Sep 2019
- Updated
- 21 Sep 2019
Overview
Esp to rs3232 is an open-source printed circuit board by smarthomefans, from the smarthomefans/RS232toESP repository on GitHub, published under the MIT licence. It is a 2-layer board of 35.6 × 31.5 mm with 21 parts on 21 nets, routed with 164 tracks and 20 vias.
It is built around the ESP-12F, MAX3232ID and AMS1117-3.3. Its parts include 7 capacitors, 3 resistors, 3 ICs, 3 connectors and 1 switch. It belongs with the radio and wireless boards and the ESP8266 boards of this library.
Main components
3
ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi Modules
MAX3232ID
SOIC-16-40℃~+85℃ 2 2 250Kbps 300uA 3V~5.5V Short-Circuit Protection Transceiver Yes ±15kV SOIC-16 RS232 ICs ROHSTexas InstrumentsRS232 ICs
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C5, C6, C7 |
| 4 | TestPoint | TestPoint:TestPoint_Bridge_Pitch2.0mm_Drill0.7mm | TP1, TP2, TP3, TP4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3 |
| 2 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C1, C2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | DB9_Female_MountingHoles | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J3 |
| 1 | ESP-12F | ESP8266:ESP-12E_SMD | U2 |
| 1 | MAX3232 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U3 |
| 1 | NC | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J1 |
Similar boards
- 2 layers70 × 57 mm
- 2 layers10 × 26 mm
- 2 layers42.8 × 53 mm
- 2 layers137.2 × 83.8 mm
PWA REV2
PubInv/krake
The Krake™ is a Wi-Fi–enabled server using an MQTT broker, which means it can be controlled remotely by other devices ("clients") via the internet.
215 parts9AGPL-3.0 - 4 layers50 × 50 mm
ESP32-Sentinel Kinetic Wireless Dongle
alextrical/ESP32-Sentinel-Kinetic-Wireless-Dongle
ESP8266 based Re-implementation of the Vent-Axia Sentinel Kinetic Wired Remote Controller without a Display
81 parts6CERN-OHL-S-2.0 - 4 layers97.3 × 69.6 mm
- 2 layers104 × 43.3 mm
Serial snooper
can-caglar/Data-Logger-STM32
The Serial Snooper is a UART data logger with automatic baud rate detection, real-time data stamping and a command-line-interface for configuration, running on an STM32F3 microcontroller.
101 parts4
Questions
How big is the Esp to rs3232 PCB?
It measures 35.6 × 31.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp to rs3232 use?
21 parts, built around the ESP-12F, MAX3232ID and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp to rs3232 KiCad files?
From the smarthomefans/RS232toESP repository on GitHub, at the commit this page was made from: the board is esp_to_rs3232.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp to rs3232 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).