2 layers87 × 84.1 mm
OpenACE V0.0.2
gatasConspicuity/gatas
eConspicuity with support for ADS-L, OGN, FLARM, FANET for General Aviation
80 parts26GPL-3.0
2 layers47.2 × 69.6 mm
Sdmplayerv0.01
SL-RU/sdmplayer26This is sources of my DIY music player based on STM32 MCU and VS1053 codec
- Size
- 47.2 × 69.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 90
- Pads
- 327
- Tracks, vias
- 1,345, 133
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 Apr 2016
- Updated
- 21 Jul 2016
Overview
Sdmplayerv0.01 is an open-source printed circuit board by SL-RU, from the SL-RU/sdmplayer repository on GitHub, published under the MIT licence. It is a 2-layer board of 47.2 × 69.6 mm with 78 parts on 90 nets, routed with 1,345 tracks and 133 vias.
It is built around the LM3671MF-3.3, VS1053B-L and AT24CS64-SSHM-B. Its parts include 33 capacitors, 15 resistors, 11 connectors, 7 ICs and 3 crystals. It belongs with the STM32 boards of this library.
Main components
3
LM3671MF-3.3
SOT-23-5-40℃~+85℃@(TA) 1 16uA 2.7V~5.5V 2MHz 3.3V 600mA Buck Buck Built-in Fixed Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
VS1053B-L
LQFP-48-40℃~+85℃ 1.65V~2V、2.5V~3.6V 8kHz~48kHz Encoder/decoder I2S、SPI、UART LQFP-48(7x7) Audio Interface ICs ROHSVLSI SolutionAudio Interface ICs
AT24CS64-SSHM-B
SOIC-8-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 years 1MHz 3mA 5ms 64Kbit 6uA 900ns Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOIC-8 EEPROM ROHSMicrochip TechnologyEEPROM
README
README.mdsdmplayer
This is sources of mine DIY music player based on STM32 MCU and VS1053 codec
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100nF | Capacitors_SMD:C_0402 | C5, C20, C21, C22, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32 |
| 5 | 0.1uF | Capacitors_SMD:C_0402 | C13, C14, C16, C17, C18 |
| 4 | 22pF | Capacitors_SMD:C_0402 | C1, C2, C3, C4 |
| 3 | 1uF | Capacitors_SMD:C_0603_HandSoldering | C8, C11, C15 |
| 2 | 100 | Resistors_SMD:R_0603_HandSoldering | R14, R15 |
| 2 | 100k | Resistors_SMD:R_0603_HandSoldering | R6, R11 |
| 2 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C10, C19 |
| 2 | 33pF | Capacitors_SMD:C_0805_HandSoldering | C6, C7 |
| 2 | 4.7k | Resistors_SMD:R_0603_HandSoldering | R12, R13 |
| 2 | R | Resistors_SMD:R_0603_HandSoldering | R1, R2 |
| 2 | gnd | Socket_Strips:Socket_Strip_Straight_1x01 | P7, P8 |
| 1 | 0.01 | Resistors_SMD:R_1206_HandSoldering | R16 |
| 1 | 0.47uF | Capacitors_SMD:C_0805_HandSoldering | C12 |
| 1 | 1.8M | Resistors_SMD:R_0603_HandSoldering | R9 |
| 1 | 100pF | Capacitors_SMD:C_0805_HandSoldering | C33 |
| 1 | 12.288MHz | Crystals:Crystal_HC49-SD_SMD | Y1 |
| 1 | 18.2k | Resistors_SMD:R_0603_HandSoldering | R10 |
| 1 | 1M | Resistors_SMD:R_0603_HandSoldering | R5 |
| 1 | 1k | Resistors_SMD:R_0603_HandSoldering | R7 |
| 1 | 2.2uH | v0:CDRH2D14 | L1 |
| 1 | 2k | Resistors_SMD:R_0603_HandSoldering | R8 |
| 1 | 3.3v | Socket_Strips:Socket_Strip_Straight_1x01 | P9 |
| 1 | 32768Hz | v0:KX-327S | Y3 |
| 1 | 4.7uF | Capacitors_SMD:C_0805_HandSoldering | C9 |
| 1 | 5k | Resistors_SMD:R_0603_HandSoldering | R3 |
| 1 | 8MHz | Crystals:Crystal_HC49-SD_SMD | Y2 |
| 1 | AT24CS64-SSHM | Housings_SOIC:SOIC-8-1EP_3.9x4.9mm_Pitch1.27mm | IC1 |
| 1 | BQ24090 | Housings_SSOP:MSOP-10-1EP_3x3mm_Pitch0.5mm | U4 |
| 1 | BQ27510 | v0:SON-12 | U5 |
| 1 | CONN_01X03 | Socket_Strips:Socket_Strip_Straight_1x03 | P5 |
| 1 | CONN_01X09 | Pin_Headers:Pin_Header_Straight_1x09 | P2 |
| 1 | ClockBat | Pin_Headers:Pin_Header_Straight_1x01 | P3 |
| 1 | JACK_TRS_6PINS | v0:ST-033 | J1 |
| 1 | LM3671MF-3.3 | TO_SOT_Packages_SMD:SOT-23-5 | U2 |
| 1 | LiPo battery | Socket_Strips:Socket_Strip_Straight_1x02 | P6 |
| 1 | NCP1117ST18T3G | TO_SOT_Packages_SMD:SOT-223 | U6 |
| 1 | SD_Card | Micro_SD_card_slot | CON1 |
| 1 | STM32F103RCTx | Housings_QFP:LQFP-64_10x10mm_Pitch0.5mm | U3 |
| 1 | SW_PUSH | Pin_Headers:Pin_Header_Straight_1x02 | SW1 |
| 1 | Switch_SPDT_x2 | v0:SK22D07-SWITCH | SW2 |
| 1 | USART1 | Pin_Headers:Pin_Header_Straight_1x02 | P4 |
| 1 | USB_OTG | Connect:USB_Micro-B | P1 |
| 1 | VS1053 | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U1 |
The 72 most common of 78 parts.
Questions
How big is the Sdmplayerv0.01 PCB?
It measures 47.2 × 69.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sdmplayerv0.01 use?
78 parts, built around the LM3671MF-3.3, VS1053B-L and AT24CS64-SSHM-B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sdmplayerv0.01 KiCad files?
From the SL-RU/sdmplayer repository on GitHub, at the commit this page was made from: the board is sch/mplayer/v0.01/sdmplayerv0.01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sdmplayerv0.01 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers50 × 100 mm
Spoke
FeruzTopalov/spoke
Standalone LoRa-based real-time off-grid relative GPS navigation for group of up to 5 people. Improved version of LRNS Eleph
143 parts16GPL-3.0 - 2 layers78 × 40 mm
- 2 layers57 × 47 mm
- 2 layers22 × 12.5 mm
PowerSupply
volium/PowerSupply_lm3671
Schematic and PCB design of 3.3 V and 600 mA power supply using LM3671
10 parts - 2 layers46 × 124.8 mm
Lazy Mouse
WeBuildAnything/Wireless-Media-Control-Mouse
The IMU sensor uses the MPU6050 library by Electronic Cats.
62 parts - 2 layers52.5 × 36.6 mm
ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
52 parts453 - 4 layers99.1 × 91.4 mm
