Skip to the content
4 layers23 × 26 mmActuator, the printed circuit board in 3D

solenoid footprint custom-made \ solenoid 3d model from DigiKey \ TS-1088 footprint modified from KiCAD libraries by me \ TS-1088 3D model from SnapEDA

Size
23 × 26 mm
Copper layers
4
Thickness
1.6 mm
Parts
18
Nets
24
Pads
62
Tracks, vias
85, 19
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 Aug 2025
Updated
21 Sep 2026

Overview

Actuator is an open-source printed circuit board by sky-dragn, from the sky-dragn/haptics-rev3 repository on GitHub. It is a 4-layer board of 23 × 26 mm with 18 parts on 24 nets, routed with 85 tracks and 19 vias.

It is built around the FDV301N. Its parts include 4 connectors, 3 capacitors, 1 resistor, 1 IC and 1 diode. It belongs with the robots and motor control boards and the STM32 boards of this library.

Main components

1

README

README.md

solenoid footprint custom-made
solenoid 3d model from DigiKey
TS-1088 footprint modified from KiCAD libraries by me
TS-1088 3D model from SnapEDA

Parts

18
QtyValueFootprintReferences
1100nCapacitor_SMD:C_0603_1608MetricC2
110kResistor_SMD:R_0603_1608MetricR1
110uCapacitor_SMD:CP_Elec_5x5.4C1
11N4007Diode_SMD:D_SOD-123FD1
14.7uCapacitor_SMD:C_0603_1608MetricC3
1DSOS-0416-24Dcustom:DSOS-0416M1
1FDV301NPackage_TO_SOT_SMD:SOT-23Q1
1INcustom:Molex_Nano-Fit_105310-xx04_2x02_P2.50mm_VerticalJ1
1OUT1custom:Molex_Nano-Fit_105310-xx04_2x02_P2.50mm_VerticalJ2
1OUT2custom:Molex_Nano-Fit_105310-xx04_2x02_P2.50mm_VerticalJ3
1PWMcustom:TestPoint_RH-5015TP1
1RESETcustom:SW_Push_SPST_TS-1088SW1
1STM32G030F6PxPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU1
1SWDConnector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_VerticalJ4
1Solenoidcustom:TestPoint_RH-5015TP2

The 15 most common of 18 parts.

Similar boards

  • 12 layers160.1 × 233.5 mmVme wren, the printed circuit board in 3D

    Vme wren

    KiCad/kicad-source-mirror

    This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.

    1,508 parts3.1kGPL-3.0
  • 2 layers88 × 102 mmToniebox v1v2, the printed circuit board in 3D

    Toniebox v1v2

    toniebox-reverse-engineering/toniebox-pcb

    KiCad schematic of the Toniebox PCB (including datasheets).

    11 parts37
  • 4 layers73.4 × 72.7 mmAwatch2, the printed circuit board in 3D

    Awatch2

    jwise/aWatch2-hw

    hardware for aWatch2

    177 parts18
  • 4 layers229 × 157 mmOMower, the printed circuit board in 3D

    OMower

    vasimv/OMower

    SDK for open-source open-hardware 2/4 wheels robots platform

    421 parts11GPL-3.0
  • 6 layers90 × 180 mmDvk mx8m bsb, the printed circuit board in 3D

    Dvk mx8m bsb

    gralco/dvk-mx8m-bsb

    Librem 5 Developer Kit using EmCraft's i.MX 8M System-on-Module.

    684 parts7GPL-3.0
  • 2 layers58 × 63 mmCamping LightRelay, the printed circuit board in 3D

    Camping LightRelay

    Rustaphor/LightRelay4Camping

    Analog light sensor to night power up LED garland. For Camping use.

    91 parts2GPL-3.0
  • 6 layers130.3 × 100 mmNoob sdr, the printed circuit board in 3D

    Noob sdr

    ainnovators/noob-sdr

    An open source SDR board derived from Michael Ossmann's Hackrf project. It should include an onboard FPGA for DSP purposes.

    473 parts1GPL-3.0
  • 2 layers49.9 × 99.9 mmLed segment, the printed circuit board in 3D

    Led segment

    makers-ie/pov-globe

    PoV globe

    52 parts1MIT

Questions

How big is the Actuator PCB?

It measures 23 × 26 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Actuator use?

18 parts, built around the FDV301N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Actuator KiCad files?

From the sky-dragn/haptics-rev3 repository on GitHub, at the commit this page was made from: the board is actuator/actuator.kicad_pcb and its schematic actuator/actuator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Actuator design in my own project?

Its repository states no licence, so its author keeps all rights: ask sky-dragn before reusing the design.