Skip to the content
4 layers210.8 × 74.9 mmBkm-10rlternative, the printed circuit board in 3D

Project aiming to replicate the BKM-10R/11R remote for Sony professional CRT monitors.

Size
210.8 × 74.9 mm
Copper layers
4
Thickness
1.6 mm
Parts
257
Nets
233
Pads
883
Tracks, vias
1,646, 247
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
24 Oct 2021
Updated
14 Apr 2022

Overview

Bkm-10rlternative is an open-source printed circuit board by skumlos, from the skumlos/bkm-10rlternative repository on GitHub. It is a 4-layer board of 210.8 × 74.9 mm with 257 parts on 233 nets, routed with 1,646 tracks and 247 vias.

It is built around the ATMEGA328PB-AU, MAX491EPD and 74LVC2G14GW, with the 74HC14 and MMBT3904 among its other parts. Its parts include 117 resistors, 55 capacitors, 36 switches, 19 ICs and 14 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

5

README

README.md

BKM-10Rlternative, a plug-and-play replacement for the BKM-10R/11R (except for memory card, for now).

Inspired by Aaron Bonhams BKM-10Rduino, which is genious!

Still early, and there's a LOT of components, plus some tweaks might still be needed:

  • Button RC-filters, as I feel that the 10nF should be replaced with 100nF, but needs testing.
  • LED current limiting resistors is of course a preference. I used 470 Ohm in my first prototype.
  • UART CTS/RTS pins are sorta irrelevant, as they're set static anyways. Removing these would also free up pins for porting to regular Atmega328P/Arduino Nano 3.0 board.
  • The discrete SS pins for each MCP23S17 should be irrelevant when using multiple addresses (which they are configured as) so removing them in the future, to free up pins would be an idea.

Plans on memory card stuff for firmware updates and such via SD cards, is planned, at least to be researched.

While the unit is modeled after the BKM-11R, the wiring of the serial port is done like the BKM-10R, meaning it uses a straight through male-male RS232/DE-9 cable, just like the BKM-10R. It is therefore not compatible with BKM-11R DE-9 -> mini-DIN cables, unless you make your own.

There is a "classic" IR receiver designed into the PCB. It is unused at the moment, and shouldn't be mounted before the software actually uses it. It was/is meant to be able to replicate some of the BKM-10Rduino functionality at some point, to have an all-in-one unit.

(2022) Martin Hejnfelt, martin@hejnfelt.com

https://www.immerhax.com

Parts

257
QtyValueFootprintReferences
5310KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R100 +37
491KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR34, R38, R42, R48, R54, R55, R56, R57, R58, R59, R60, R61, R62, R111, R113, R115 +33
4010nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C10, C11, C13, C14, C15, C16, C17, C18, C20, C21, C22, C23, C24, C25 +24
14560RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR101, R102, R103, R104, R105, R106, R107, R108, R109, R110, R112, R114, R116, R118
14MMBT3904Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14
12MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12
11100nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC12, C19, C32, C33, C47, C48, C51, C52, C53, C54, C55
974LVC2G14Package_TO_SOT_SMD:SOT-23-6_HandsolderingU1, U13, U14, U15, U16, U17, U18, U19, U20
474HC14Package_SO:SSOP-14_5.3x6.2mm_P0.65mmU2, U3, U4, U5
3MCP23S17_SSPackage_SO:SSOP-28_5.3x10.2mm_P0.65mmU10, U11, U12
2100uFCapacitor_SMD:CP_Elec_6.3x5.4C8, C46
210uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC49, C50
1ADDR_SAFE_AREATL-1240:TL-1240SW10
1APT_GTL-1240:TL-1240SW6
1ATmega328PB-AUPackage_QFP:TQFP-32_7x7mm_P0.8mmU9
1BRIGHT_KNOBRotary_Encoder:RotaryEncoder_Alps_EC11E_Vertical_H20mmSW32
1BRIGHT_MANUALTL-1240:TL-1240SW31
1CHROMA_KNOBRotary_Encoder:RotaryEncoder_Alps_EC11E_Vertical_H20mmSW34
1CHROMA_MANUALTL-1240:TL-1240SW33
1COMB_BTL-1240:TL-1240SW7
1CONTRAST_KNOBRotary_Encoder:RotaryEncoder_Alps_EC11E_Vertical_H20mmSW30
1CONTRAST_MANUALTL-1240:TL-1240SW29
1DB9_Male_MountingHolesConnector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mmJ1
1DEGAUSSTL-1240:TL-1240SW15
1DOWNTL-1240:TL-1240SW13
1ENTERTL-1240:TL-1240SW14
1F1_F3TL-1240:TL-1240SW8
1F2_F4TL-1240:TL-1240SW9
1FuseFuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolderF1
1HORIZ_SYNCTL-1240:TL-1240SW2
1ICSPConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ2
1KEY_0TL-1240:TL-1240SW27
1KEY_1TL-1240:TL-1240SW17
1KEY_2TL-1240:TL-1240SW18
1KEY_3TL-1240:TL-1240SW19
1KEY_4TL-1240:TL-1240SW20
1KEY_5TL-1240:TL-1240SW21
1KEY_6TL-1240:TL-1240SW22
1KEY_7TL-1240:TL-1240SW23
1KEY_8TL-1240:TL-1240SW24
1KEY_9TL-1240:TL-1240SW25
1KEY_DELTL-1240:TL-1240SW26
1KEY_ENTERTL-1240:TL-1240SW28
1MAX491EPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU8
1MENUTL-1240:TL-1240SW12
1MONO_RTL-1240:TL-1240SW5
1NMResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR53
1PHASE_KNOBRotary_Encoder:RotaryEncoder_Alps_EC11E_Vertical_H20mmSW36
1PHASE_MANUALTL-1240:TL-1240SW35
1POWERTL-1240:TL-1240SW16
1ResonatorCrystal:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm_HandSolderingY1
1SHIFTTL-1240:TL-1240SW1
1TSOP382xxOptoDevice:Vishay_MINICAST-3PinU6
1UNDERSCAN_16_9TL-1240:TL-1240SW3
1UPTL-1240:TL-1240SW11
1VERT_BLUE_ONLYTL-1240:TL-1240SW4

Similar boards

  • 2 layers97.6 × 44.2 mmGR ISO Board, the printed circuit board in 3D

    GR ISO Board

    GadgetReboot/GR_ISO_Board

    Isolation breakout board with a 5V isolated DC-DC converter, optocouplers, Relay, and more.

    62 parts1
  • 2 layers248.1 × 172.1 mmExpanders, the printed circuit board in 3D

    Expanders

    koko69420/HomeBus

    Hard wired home automation, based on a RSICV MCU and RS-422 communication protocol

    180 parts
  • 4 layers95 × 82 mmBalancingrobot, the printed circuit board in 3D

    Balancingrobot

    SuperTails/16299-balancing-robot

    Control PCB for 16299 at CMU

    50 parts
  • 6 layers83.5 × 99.4 mmTAPRx888, the printed circuit board in 3D

    TAPRx888

    TAPR/TAPRx888

    The TAPR rx888 replacement board project

    225 parts6MIT
  • 2 layers94 × 57 mmChiller, the printed circuit board in 3D

    Chiller

    bullestock/chiller

    Lasersaur chiller

    72 parts
  • 2 layers210 × 104 mmAmplifierBoard, the printed circuit board in 3D

    AmplifierBoard

    dangrie158/AmpStation

    A Class D audio amplifier in a n old Teufel Decoder Station 5 case

    243 partsMIT
  • 2 layers72.4 × 58.9 mmSmartrelay, the printed circuit board in 3D

    Smartrelay

    acshi/home_automation

    52 parts

Questions

How big is the Bkm-10rlternative PCB?

It measures 210.8 × 74.9 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Bkm-10rlternative use?

257 parts, built around the ATMEGA328PB-AU, MAX491EPD, 74LVC2G14GW and 74HC14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Bkm-10rlternative KiCad files?

From the skumlos/bkm-10rlternative repository on GitHub, at the commit this page was made from: the board is bkm-10rlternative.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Bkm-10rlternative design in my own project?

Its repository states no licence, so its author keeps all rights: ask skumlos before reusing the design.