
Control
Jochen0x90h/LedControl
Controller for LED strips based on WS2812 with display based on SSD1306

Smartrelay is an open-source printed circuit board by acshi, from the acshi/home_automation repository on GitHub. It is a 2-layer board of 72.4 × 58.9 mm with 52 parts on 41 nets, routed with 286 tracks and 66 vias.
It is built around the ATMEGA328PB-AU, MAX918ESA+T and TSOP38338, with the 2N7002WT1G, G5RL-K1A-E-DC5 and MMBT3904 among its other parts. Its parts include 16 resistors, 11 capacitors, 9 transistors, 4 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 2N7002WT1G | Package_TO_SOT_SMD:SOT-323_SC-70_Handsoldering | Q1, Q2, Q3, Q4, Q5, Q6, Q8 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C4, C5, C9 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6, C7, C10, C11 |
| 4 | 22M | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R4, R5, R6 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R9 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11, R15 |
| 2 | G5RL-K1A-E | LatchingRelay:LatchingRelayG5RL-K1A-E | RL1, RL2 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q7, Q9 |
| 1 | 0.15nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R16 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | 2200uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C8 |
| 1 | 3.09M | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8 |
| 1 | 3.9R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R13 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R14 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 4.7uH | Inductor_THT:L_Radial_D9.5mm_P5.00mm_Fastron_07HVP | L1 |
| 1 | 470k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7 |
| 1 | 47R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R10 |
| 1 | 680k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R12 |
| 1 | ATMEGA328PB-AU | digikey-footprints:TQFP-32_7x7mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | Battery_Cell | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | D_Photo | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | D1 |
| 1 | IR1503 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | D2 |
| 1 | MAX918ESA | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | MCP16251T-I/CH | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U2 |
| 1 | OSTYK42103030 | conn_barrier:CONN_BARRIER_STRIP_3CIRC_0.325in | J1 |
| 1 | TSOP38338 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | U4 |
The 48 most common of 52 parts.

Jochen0x90h/LedControl
Controller for LED strips based on WS2812 with display based on SSD1306


openconcepts-ar/accel2d
This project aims to provide a graphics server system based on hardware accelerated graphics, and a easy way to develop the graphics primitives.

skumlos/bkm-10rlternative
Project aiming to replicate the BKM-10R/11R remote for Sony professional CRT monitors.



kiu/lofence
LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.

silvervest/c64pico
This is a tiny emulated C64 running on a Raspberry Pi Pico! Full details of the build can be found at https://www.youtube.com/watch?v=hgLhGpbC6E4
It measures 72.4 × 58.9 mm and has 2 copper layers, 1.6 mm thick.
52 parts, built around the ATMEGA328PB-AU, MAX918ESA+T, TSOP38338 and 2N7002WT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the acshi/home_automation repository on GitHub, at the commit this page was made from: the board is kicad/smartrelay.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask acshi before reusing the design.