2 layers336.6 × 121.7 mm
2 layers336.6 × 121.7 mm
Skeleton68
skeletonkbd/Skeleton683- Size
- 336.6 × 121.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 224
- Nets
- 178
- Pads
- 1,029
- Tracks, vias
- 2,919, 157
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 May 2022
- Updated
- 14 Sep 2023
Overview
Skeleton68 is an open-source printed circuit board by skeletonkbd, from the skeletonkbd/Skeleton68 repository on GitHub, published under the MIT licence. It is a 2-layer board of 336.6 × 121.7 mm with 224 parts on 178 nets, routed with 2,919 tracks and 157 vias.
It is built around the ATMEGA32U4-MU and PRTR5V0U2X. Its parts include 136 diodes, 68 switches, 8 capacitors, 6 resistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdSkeleton68
Parts
224| Qty | Value | Footprint | References |
|---|---|---|---|
| 68 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +52 |
| 68 | YS-SK6812MINI-E | Custom:YS-SK6812MINI-E | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +52 |
| 55 | SW_PUSH | Custom:MXOnly-1U-Hotswap | SW1, SW2, SW10, SW11, SW12, SW13, SW15, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25 +39 |
| 6 | SW_PUSH | Custom:MXOnly-1.5U-Hotswap | SW16, SW29, SW59, SW60, SW64, SW65 |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C4, C5, C6, C7 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R4, R6 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R3, R5 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | SW_PUSH | Custom:MXOnly-2.25U-Hotswap | SW43, SW45 |
| 2 | SW_PUSH | Custom:MXOnly-1.75U-Hotswap | SW31, SW57 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | ATmega32U4-M | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | U2 |
| 1 | SW_PUSH | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW_69 |
| 1 | SW_PUSH | Custom:MXOnly-2U-Hotswap-ReversedStabilizers | SW61 |
| 1 | SW_PUSH | Custom:MXOnly-2.75U-Hotswap-ReversedStabilizers | SW63 |
| 1 | SW_PUSH | Custom:MXOnly-2U-Hotswap | SW14 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J1 |
More from skeletonkbd/Skeleton68
1Similar boards
- 2 layers344 × 124.5 mm
- 2 layers285 × 95.1 mm
- 2 layers285 × 95.1 mm
- 2 layers284.3 × 116.2 mm
- 2 layers285.7 × 95.5 mm
Jones
jpskenn/Jones
Row-staggered 60% keyboard with gapless R2-R3 row. GH60 case compatible.
249 parts12MIT - 2 layers285 × 95.1 mm
Nora
jpskenn/Nora
Narrow pitch keyboard with Choc switches and keycaps. GH60 compatible.
303 parts12MIT - 2 layers209.6 × 76.2 mm
Didaktik
calvin-mcd/Didaktik-40
a 40s keyboard inspired by the Didaktik computer & keyboard
129 parts9GPL-3.0 - 2 layers228.4 × 85 mm
LeChiffre
paindrivendev/le-yiffre
Le Yiffre is a modified hotswap Le Chiffre pcb as an experimental design with different thumb clusters.Thanks to tominabox1 for creating Le Chiffre Keyboard and making it open source.
108 parts8
Questions
How big is the Skeleton68 PCB?
It measures 336.6 × 121.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Skeleton68 use?
224 parts, built around the ATMEGA32U4-MU and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Skeleton68 KiCad files?
From the skeletonkbd/Skeleton68 repository on GitHub, at the commit this page was made from: the board is Skeleton68_backlit/Skeleton68.kicad_pcb and its schematic Skeleton68_backlit/Skeleton68.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Skeleton68 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).