

Skeleton68 underglow
- Size
- 336.6 × 121.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 170
- Nets
- 124
- Pads
- 813
- Tracks, vias
- 1,948, 91
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 May 2022
- Updated
- 14 Sep 2023
Overview
Skeleton68 underglow is an open-source printed circuit board by skeletonkbd, from the skeletonkbd/Skeleton68 repository on GitHub, published under the MIT licence. It is a 2-layer board of 336.6 × 121.7 mm with 170 parts on 124 nets, routed with 1,948 tracks and 91 vias.
It is built around the ATMEGA32U4-MU, PRTR5V0U2X and WS2812B. Its parts include 82 diodes, 68 switches, 8 capacitors, 6 resistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdSkeleton68

Parts
170| Qty | Value | Footprint | References |
|---|---|---|---|
| 68 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +52 |
| 55 | SW_PUSH | Custom:MXOnly-1U-Hotswap | SW1, SW2, SW10, SW11, SW12, SW13, SW15, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25 +39 |
| 14 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12, LED13, LED14 |
| 6 | SW_PUSH | Custom:MXOnly-1.5U-Hotswap | SW16, SW29, SW59, SW60, SW64, SW65 |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C4, C5, C6, C7 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R4, R6 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R3, R5 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | SW_PUSH | Custom:MXOnly-2.25U-Hotswap | SW43, SW45 |
| 2 | SW_PUSH | Custom:MXOnly-1.75U-Hotswap | SW31, SW57 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | ATmega32U4-M | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | U2 |
| 1 | SW_PUSH | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW_69 |
| 1 | SW_PUSH | Custom:MXOnly-2U-Hotswap-ReversedStabilizers | SW61 |
| 1 | SW_PUSH | Custom:MXOnly-2.75U-Hotswap-ReversedStabilizers | SW63 |
| 1 | SW_PUSH | Custom:MXOnly-2U-Hotswap | SW14 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J1 |
More from skeletonkbd/Skeleton68
1- 2 layers336.6 × 121.7 mm

Similar boards
- 2 layers228.4 × 85 mm

LeChiffre
paindrivendev/le-yiffre
Le Yiffre is a modified hotswap Le Chiffre pcb as an experimental design with different thumb clusters.Thanks to tominabox1 for creating Le Chiffre Keyboard and making it open source.
108 parts8 - 2 layers285 × 95.1 mm

Voyager60
staticintlucas/Voyager60-SMK
A fork of ai03's Voyager60-Alps, adapted for SMK 2nd gen switches
198 parts2MIT - 2 layers343.8 × 98.1 mm

- 2 layers68.3 × 31.8 mm

- 2 layers114.3 × 20.6 mm

- 2 layers337.2 × 123.2 mm

- 2 layers309.6 × 119.1 mm

- 2 layers343.7 × 118.3 mm

Questions
How big is the Skeleton68 underglow PCB?
It measures 336.6 × 121.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Skeleton68 underglow use?
170 parts, built around the ATMEGA32U4-MU, PRTR5V0U2X and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Skeleton68 underglow KiCad files?
From the skeletonkbd/Skeleton68 repository on GitHub, at the commit this page was made from: the board is Skeleton68_underglow/Skeleton68_underglow.kicad_pcb and its schematic Skeleton68_backlit/Skeleton68.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Skeleton68 underglow design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).