
LeChiffre
paindrivendev/le-yiffre
Le Yiffre is a modified hotswap Le Chiffre pcb as an experimental design with different thumb clusters.Thanks to tominabox1 for creating Le Chiffre Keyboard and making it open source.

2x3u is an open-source printed circuit board by matthewdias, from the matthewdias/2x3u_pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 114.3 × 20.6 mm with 27 parts on 47 nets, routed with 276 tracks and 19 vias.
It is built around the ATMEGA32U4-MU, PRTR5V0U2X and WS2812B. Its parts include 9 capacitors, 6 resistors, 3 switches, 2 ICs and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C6 |
| 4 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | RGB0, RGB1, RGB2, RGB3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 3U | MX_Only:MXOnly-3U-ReversedStabilizers-NoLED | K0, K1 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | ATmega32U4-MU | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U1 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12-Assembly | USB1 |
| 1 | PRTR5V0U2X | random-keyboard-parts:SOT143B | U2 |
| 1 | SW_Push | random-keyboard-parts:SKQG-1155865 | SW1 |

paindrivendev/le-yiffre
Le Yiffre is a modified hotswap Le Chiffre pcb as an experimental design with different thumb clusters.Thanks to tominabox1 for creating Le Chiffre Keyboard and making it open source.

staticintlucas/Voyager60-SMK
A fork of ai03's Voyager60-Alps, adapted for SMK 2nd gen switches






It measures 114.3 × 20.6 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the ATMEGA32U4-MU, PRTR5V0U2X and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the matthewdias/2x3u_pcb repository on GitHub, at the commit this page was made from: the board is 2x3u.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).