sjaxel/driver-boostconDriver boostcon is an open-source printed circuit board by sjaxel, from the sjaxel/driver-boostcon repository on GitHub. It is a 2-layer board of 100 × 80 mm with 62 parts on 33 nets, routed with 476 tracks and 37 vias.
It is built around the ATMEGA328P-PU, INA282AID and BSC016N04LS G, with the IRF4905S among its other parts. Its parts include 26 capacitors, 15 resistors, 4 connectors, 2 ICs and 2 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100 nF | axel:C_0603_CustomText | C202, C501, C502, C601, C602, C603, C607, C701, C901 |
| 6 | 1 uF | axel:C_0805_CustomText | C402, C403, C406, C503, C504, C606 |
| 3 | 0.002 Ohm | axel:R-SMD-4527 | R403, R404, R405 |
| 3 | 470 uF | Capacitors_SMD:CP_Elec_10x10.5 | C401, C404, C405 |
| 2 | 100 Ohm | axel:C_0603_CustomText | R601, R602 |
| 2 | 20 pF | axel:C_0603_CustomText | C604, C605 |
| 2 | 4.7 kOhm | axel:C_0603_CustomText | R606, R607 |
| 2 | 4.7k | axel:C_0603_CustomText | R604, R605 |
| 2 | 680 nF | axel:C_0603_CustomText | C802, C803 |
| 2 | 6k | axel:R_0603_CustomText | R801, R802 |
| 2 | SwitchDriver | TO_SOT_Packages_SMD:SOT-23-5 | FDR501, FDR502 |
| 1 | 10 uF | Capacitors_SMD:CP_Elec_6.3x5.3 | C201 |
| 1 | 100 nF | axel:C_0805_CustomText | C204 |
| 1 | 10k Ohm | axel:C_0603_CustomText | R603 |
| 1 | 16 MHz | axel:Crystal_SMD_4.6mmx11.2mm | Y601 |
| 1 | 2k Ohm | axel:C_0603_CustomText | R401 |
| 1 | 4.7 uF | axel:C_0805_CustomText | C203 |
| 1 | 47k | axel:C_0603_CustomText | R901 |
| 1 | 5 Ohm | axel:C_0603_CustomText | R402 |
| 1 | 80 uH | axel:Chipdrossel | L601 |
| 1 | ATMEGA328P-PU | Housings_DIP:DIP-28_W7.62mm_Socket | U601 |
| 1 | BSC016N04LS | axel:PG-TDSON-8 | Q402 |
| 1 | C_Small | axel:C_0603_CustomText | C801 |
| 1 | DS75 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | TS701 |
| 1 | D_Schottky | axel:TO220AB-SMD | D401 |
| 1 | Fuse | axel:Littlefuse_30mm_M5 | F301 |
| 1 | GroundPoint | Oddities:NetTie-II_Connected_SMD | GND301 |
| 1 | INA282 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U801 |
| 1 | INDUCTOR | axel:SER2900 | L401 |
| 1 | IRF4905S | axel:TO-263-3Lead_NoPin2 | Q401 |
| 1 | NCP5501 | TO_SOT_Packages_SMD:TO-263-3Lead_TabPin4 | LDO201 |
| 1 | On Switch | Socket_Strips:Socket_Strip_Straight_1x04_Pitch2.54mm | P301 |
| 1 | PowerGND | Mounting_Holes:MountingHole_3.2mm_M3_Pad | P303 |
| 1 | Programmer | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | P601 |
| 1 | RegulatedPWR | Mounting_Holes:MountingHole_3.2mm_M3_Pad | P304 |
| 1 | SW_Push | axel:Button_SMD_6x6mm | SW601 |
The 60 most common of 62 parts.
svdrecbd/NEMESIS
NEMESIS (Non-periodic Event Monitoring & Evaluation of Stimulus-Induced States). A desktop app for Stentor habituation: live USB-microscope preview, Arduino stepper taps (Periodic/Poisson, seedable), independent MP4…
CCHS-Melbourne/vend-matrix
This is the CCHS Vending Machine motor controller.
It measures 100 × 80 mm and has 2 copper layers, 1.5 mm thick.
62 parts, built around the ATMEGA328P-PU, INA282AID, BSC016N04LS G and IRF4905S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sjaxel/driver-boostcon repository on GitHub, at the commit this page was made from: the board is driver-boostcon.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sjaxel before reusing the design.