

RippleCharger
Sinusoidal Charging for Li-ion Battery
- Size
- 295 × 150 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 129
- Nets
- 155
- Pads
- 446
- Tracks, vias
- 830, 90
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Nov 2021
- Updated
- 7 Mar 2023
Overview
RippleCharger is an open-source printed circuit board by HabonRoof, from the HabonRoof/SRC-Charging repository on GitHub. It is a 2-layer board of 295 × 150 mm with 129 parts on 155 nets, routed with 830 tracks and 90 vias.
It is built around the LM358, INA282AID and L7805, with the MMBT3904, RY5W-K and AD9833BRM among its other parts. Its parts include 44 resistors, 19 diodes, 17 capacitors, 9 ICs and 9 connectors. It belongs with the power boards of this library.
Main components
7LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierINA282AID
SOIC-8-14V~80V -40℃~+125℃ 0.3uV/℃ 1 10kHz 110nV/√Hz@1kHz 140dB 2.7V~18V 20uV 25uA 50V/V 600uA High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Programmable output reference level ±5V SOIC-8 Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense AmplifiersL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)RY5W-K
DIP,20.2x9.8mm-30℃~+90℃ 100mΩ 150mW 165Ω 1A 3ms 500mA@120VAC、1A@24VDC 5V 60V@DC、120V@AC 6ms AgPd + Gold Plated Two groups of conversions: 2C(Double-pole double-throw conversion) DIP,20.2x9.8mm Signal Relays ROHSFUJITSUSignal RelaysAD9833BRM
-- Direct Digital Synthesis (DDS)Analog DevicesDirect Digital Synthesis (DDS)TIP41C
TO-220-3L-55℃~+150℃ 1 NPN 1.5V 100V 15 2W 3MHz 400uA 5V 6A NPN TO-220-3L Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdSinusoidal Charger with Optimized Frequency Tracking for Li-ion Batteries
The purpose of this thesis is to develop a sinusoidal charger that can track the optimized frequency of Li-ion batteries. In this study, the optimized AC impedance frequency tracking is firstly carried out for various types of lithium-ion batteries with different aging degrees to achieve the goal of shortening the charging time and increasing the charging efficiency. The digital control core of the charger developed in this thesis uses the F280049C digital signal controller (DSC) produced by Texas Instruments and adopts the Powell algorithm to quickly search for the best sinusoidal charging current frequency when the battery state-of-charge (SOC) is 0%, 15% and 30%, which ensures the lowest impedance during charging. The proposed prototyping circuit uses field effect transistors as voltage-to-current converters and utilizes digital finite impulse response filters and proportional-integral controllers to stabilize the charging current. The charger can provide a maximum charging power of 21W. The experimental results show that the proposed sinusoidal charger can shorten the charging time by 3.66%, reduce the charging loss by 1.08% and reduce the temperature rise by 27.16% compared with the traditional constant current and constant voltage charging method. Keyword: Sinusoidal Charging, Li-ion Batteries, Fast Charging technique, On-line Optimized Impedance Tracking
Outlook
File disceiption
AD5940_BATImpedance
- ADICuP3029 project, to control and calculate real/imaginary part of impedance. Include FFT calculation.
- Source code for AD5940 battery EIS measurment module (CN0510), modified and origin by Analog Device .Inc.
KiCad
- Schematic file and PCB file for main board, which offer CN0510, F280049C Launch Pad and AD9833 waveform generator module a base.
RippleCharging
- The main CCS project folder, control the behavior of sinusoidal charger, waveform generator, MOSFET relay, EIS measurement module.
ad5940lib
- Companion library of AD5940_BATImpedance folder
Parts
129| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R11, R13, R17, R23, R26, R27, R28, R33, R34, R38, R41, R42, R43, R44, R45 +1 |
| 16 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R7, R8, R12, R14, R15, R16, R18, R21, R22, R24, R30, R32, R47 |
| 13 | 1N4148 | Diode_SMD:D_SOD-123 | D2, D3, D4, D5, D7, D8, D9, D10, D11, D12, D15, D17, D18 |
| 8 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C7, C8, C10, C11, Cs1 |
| 5 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C14, C15, C16 |
| 5 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U3, U4, U5, U6 |
| 5 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q4, Q5, Q6 |
| 4 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R9, R10 |
| 4 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6, D13, D14, D19 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 4 | RY5W-K | basic:RY5W-K | RY1, RY2, RY3, RY4 |
| 3 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV2, RV4, RV5 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C12, C13 |
| 3 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29, R31, R48 |
| 2 | 50k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1, RV3 |
| 2 | IOPad | basic:IOPad | P1, P2 |
| 2 | Iprob- | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP4, TP4 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D16 |
| 1 | 0.33u | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C1 |
| 1 | 100k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV6 |
| 1 | 18650-holder-dual | basic:18650-holder-dual | B1 |
| 1 | 2 | Resistor_THT:R_Axial_Power_L20.0mm_W6.4mm_P25.40mm | R37 |
| 1 | 200 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25 |
| 1 | 500 | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV7 |
| 1 | 50m | Resistor_SMD:R_Shunt_Ohmite_LVK24 | R36 |
| 1 | 62 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R35 |
| 1 | AD9833 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | Asymm | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP1 |
| 1 | EISport | basic:CN0510_BNC | E1 |
| 1 | Ferrite_Bead_Small | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1 |
| 1 | Heatsink | Heatsink:Heatsink_Fischer_SK104-STCB_35x13mm__2xDrill3.5mm_ScrewM3 | HS1 |
| 1 | INA282 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | Iprob+ | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP3 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-252-2 | U1 |
| 1 | LAUNCHXL-F280049C | basic:LANCHXL-F280049C | U7 |
| 1 | LM317_TO-263 | Package_TO_SOT_SMD:TO-263-2 | U9 |
| 1 | Load+ | basic:IOPad | P3 |
| 1 | Load- | basic:IOPad | P4 |
| 1 | Mode | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | TIP41C | Package_TO_SOT_THT:TO-220-3_Vertical | Q3 |
| 1 | UART1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | UART2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | base | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP2 |
| 1 | bat+ | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | bat- | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
More from HabonRoof/SRC-Charging
4- 2 layers190.2 × 195.3 mm

- 2 layers

- 2 layers300 × 200 mm

- 2 layers215.7 × 150 mm

Similar boards
- 4 layers94.5 × 24.7 mm

FDD Board
RWeick/FFE-Sega-Genesis-Super-Magic-Drive
The bioses and Kicad files for the FFE Super Magic Drive for the Sega Genesis
14 parts1GPL-3.0 - 2 layers65 × 85 mm

Function Generator
MUDAL/Function-Generator
Custom Function Generator designed and developed by Olaoluwa Raji. This project is a complete embedded system solution with both hardware and software implemented by me. Relevant reference materials are included.
30 parts1GPL-3.0 - 2 layers108 × 110 mm

- 4 layers50 × 50 mm

Power supply
nakoyonioka/PSU
This repository contains the design files for a regulated power supply circuit featuring multiple voltage regulation stages, overcurrent detection, and output control.
78 parts - 2 layers99.3 × 98.6 mm

FlexiblePS
profdc9/FlexibleCharger
An Arduino-controlled charger for different kinds of batteries, or it can be a standalone power supply
118 parts13 - 2 layers50 × 100 mm

- 2 layers95 × 72 mm

- 2 layers50 × 50 mm

Questions
How big is the RippleCharger PCB?
It measures 295 × 150 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RippleCharger use?
129 parts, built around the LM358, INA282AID, L7805 and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RippleCharger KiCad files?
From the HabonRoof/SRC-Charging repository on GitHub, at the commit this page was made from: the board is KiCad/RippleCharger/RippleCharger.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RippleCharger design in my own project?
Its repository states no licence, so its author keeps all rights: ask HabonRoof before reusing the design.