
E ink watch
sandgum/Triangulate-ES_01-Watch
A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power

Two-layer KiCad PCB for a DIY SpO2 pulse oximeter (Aduino Nano, MAX30102, SSD1306)
Proj-1 is an open-source printed circuit board by Sin-Kid, from the Sin-Kid/diy-spo2-pcb repository on GitHub. It is a 2-layer board of 70.8 × 49.2 mm with 14 parts on 30 nets, routed with 114 tracks and 1 via.
It is built around the MAX30102. Its parts include 4 resistors, 3 capacitors, 3 switches, 2 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
A two-layer through-hole PCB for a DIY pulse oximeter, designed in KiCad 10. An Arduino Nano reads a MAX30102 sensor module and drives an SSD1306 display.


The Arduino Nano, OLED display and MAX30102 module have no 3D models here, so they appear only as outlines.


| Ref | Part |
|---|---|
| A1 | Arduino Nano v3.x |
| U1 | SSD1306 display module |
| U2 | MAX30102 sensor module |
| SW1–SW3 | 6 mm push buttons |
| D1 | 3 mm LED |
| R1–R4 | 1k resistors |
| C1–C3 | 100n capacitors |
proj-1.kicad_pro, .kicad_sch, .kicad_pcb: the KiCad project. Open the .kicad_pro file in KiCad.spo2_stuff.pretty/: custom footprints for the MAX30102 and SSD1306 modules.images/: screenshots of the PCB layout, 3D view and schematic.gerbers/: fabrication files. diysp02v1_gerbers.zip is ready to upload to a PCB manufacturer.| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 3 | 100n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2, C3 |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | MAX30102 | spo2_stuff:MAX30102_Module | U2 |
| 1 | SSD1306 | spo2_stuff:SSD1306 | U1 |

sandgum/Triangulate-ES_01-Watch
A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power

theheraldproject/herald-hardware
Permissively licensed opensource hardware designs for Herald powered wearables and beacons. Supports digital contact tracing and other eHealth approaches.

abhinav937/RP2040_SOS_band
PCB design files for RP2040 based SmartWatch. It features an accelerometer, a GPS module and a cellular module.

Epivaral/CursoIoT
Material complementario del curso: INTRODUCCIÓN A IOT, ALMACENAMIENTO EN LA NUBE Y ANÁLISIS DE DATA

Ghost3379/NX-ISD
A more sophisticated version of the Artemis Watch by Circuitmess.


Soham3126/DIY-SPO2-KiCAD-Project
A low-cost, non-invasive Pulse Oximeter (SpO2) and Heart Rate monitor based on the MAX30102 sensor and Arduino. This project features real-time PPG signal processing, I2C communication, and a custom PCB design for…

Taller-de-sistemas-embebidos-tps/tdse-tf_2-01
Trabajo Final - Taller de Sistemas Embebidos - FIUBA
It measures 70.8 × 49.2 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the MAX30102. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Sin-Kid/diy-spo2-pcb repository on GitHub, at the commit this page was made from: the board is proj-1.kicad_pcb and its schematic proj-1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Sin-Kid before reusing the design.