

Hdctl 01
- Size
- 101.6 × 70.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 126
- Pads
- 335
- Tracks, vias
- 547, 53
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 May 2024
- Updated
- 19 Mar 2026
Overview
Hdctl 01 is an open-source printed circuit board by sim82, from the sim82/6502_sbc repository on GitHub, published under the MIT licence. It is a 4-layer board of 101.6 × 70.1 mm with 27 parts on 126 nets, routed with 547 tracks and 53 vias.
It is built around the PAL20RS10CNL, 74HC245D and 74HCT574D, with the 74HC193D among its other parts. Its parts include 5 capacitors, 5 ICs, 5 connectors, 3 resistors and 2 diodes.
Main components
4PAL20RS10CNL
PLCC-28(11.5x11.5)PAL PLCC-28(11.5x11.5) Programmable Logic Device (CPLDs/FPGAs)AMDProgrammable Logic Device (CPLDs/FPGAs)74HC245D
SO-20-300mil-40℃~+125℃ 1 160uA 2V~6V 7.8mA 7.8mA 74HC 8 9ns@4.5V,50pF Bidirectional Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers74HCT574D
SO-20-300mil-40℃~+125℃ 1 18ns@4.5V,50pF 3.5pF 3ns 4.5V~5.5V 5ns 69MHz 6mA 6mA 74HCT Series 8 8uA D-Type Rising Edge Tri-State SOIC-20-300mil Flip Flops ROHSNexperiaFlip Flops74HC193D
SO-16-40℃~+125℃ 1 18ns@6V 2V~6V 4 49MHz 500mW 74HC Asynchronous Divide-by-2 Reset function、Synchronous counting、Asynchronous parallel load、Multi-mode counting Rising Edge Synchronous Up Counter、Down Counter SO-16 Counters, Dividers ROHSNexperiaCounters / Dividers
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C5, C6, C7 |
| 4 | GND | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 74HCT574 | Package_SO:SO-20_12.8x7.5mm_P1.27mm | U2, U3 |
| 2 | Conn_02x20_Odd_Even | Connector_IDC:IDC-Header_2x20_P2.54mm_Vertical | J2, J4 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 2 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 74HC193 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | 74HC245 | Package_SO:SO-20_12.8x7.5mm_P1.27mm | U4 |
| 1 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_02x22_Odd_Even | Connector_PinSocket_2.00mm:PinSocket_2x22_P2.00mm_Horizontal | J3 |
| 1 | DIN41612_02x32_AC | Connector_DIN:DIN41612_C_2x32_Male_Horizontal_THT | J1 |
| 1 | PAL20RS10 | Package_DIP:DIP-24_W7.62mm_Socket | U1 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | R_Pack04 | Resistor_SMD:R_Array_Convex_4x0612 | RN1 |
| 1 | SW_DIP_x04 | Button_Switch_SMD:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W8.61mm_P2.54mm | SW1 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
More from sim82/6502_sbc
9- 2 layers99.1 × 94.2 mm

- 4 layers80.9 × 100.6 mm

- 2 layers119.4 × 91.4 mm

- 2 layers59.4 × 65.5 mm

- 2 layers99.1 × 34.5 mm

- 2 layers

- 2 layers70.6 × 26.9 mm

- 2 layers120.6 × 92.7 mm

- 2 layers120.6 × 92.7 mm

Similar boards
- 2 layers245.1 × 160 mm

8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
139 parts326 - 2 layers191.8 × 121.3 mm

8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
109 parts184 - 2 layers306.1 × 130.2 mm

8-Bit CPU 32k
slu4coder/Minimal-64-Home-Computer
Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64
132 parts94 - 2 layers208.9 × 170.8 mm

8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-3
Version 3 of my educational DIY TTL computer built around a UART serial interface - now with blinkenlights!
207 parts54 - 2 layers178 × 711 mm

- 2 layers213.1 × 129 mm

- 2 layers180.3 × 112.4 mm

- 2 layers297 × 210 mm

Questions
How big is the Hdctl 01 PCB?
It measures 101.6 × 70.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Hdctl 01 use?
27 parts, built around the PAL20RS10CNL, 74HC245D, 74HCT574D and 74HC193D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hdctl 01 KiCad files?
From the sim82/6502_sbc repository on GitHub, at the commit this page was made from: the board is kicad/hdctl_01/hdctl_01.kicad_pcb and its schematic kicad/backplane/backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hdctl 01 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).