

Cpu board 03
- Size
- 99.1 × 94.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 136
- Pads
- 455
- Tracks, vias
- 1,169, 189
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 May 2024
- Updated
- 19 Mar 2026
Overview
Cpu board 03 is an open-source printed circuit board by sim82, from the sim82/6502_sbc repository on GitHub, published under the MIT licence. It is a 2-layer board of 99.1 × 94.2 mm with 65 parts on 136 nets, routed with 1,169 tracks and 189 vias.
It is built around the 74HC245D, 74AHC1G32GW and 74HCT574D, with the MAX1232CPA+ among its other parts. Its parts include 14 capacitors, 14 diodes, 11 ICs, 5 connectors and 3 resistors. It belongs with the FPGA and CPLD boards of this library.
Main components
474HC245D
SO-20-300mil-40℃~+125℃ 1 160uA 2V~6V 7.8mA 7.8mA 74HC 8 9ns@4.5V,50pF Bidirectional Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers74AHC1G32GW
SOT-353-40℃~+125℃ 1 1.5V~3.85V 1.9V、2.9V、3.94V、4.4V 100mV、100mV、100mV、550mV 1uA 2 2V~5.5V 500mV~1.65V 7.5ns@5V,50pF 74AHC Series 8mA 8mA OR Gate Overvoltage-tolerant input SOT-353 Logic Gates ROHSNexperiaLogic Gates74HCT574D
SO-20-300mil-40℃~+125℃ 1 18ns@4.5V,50pF 3.5pF 3ns 4.5V~5.5V 5ns 69MHz 6mA 6mA 74HCT Series 8 8uA D-Type Rising Edge Tri-State SOIC-20-300mil Flip Flops ROHSNexperiaFlip FlopsMAX1232CPA+
PDIP-80℃~+70℃@(TA) 1 250ms 4.37V、4.62V Active High、Active Low Open-drain Simple Reset/Power-On Reset PDIP-8 Supervisor and Reset ICs ROHSMaxim Integrated (Analog Devices)Supervisor And Reset ICs
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | LED_Small | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14 |
| 11 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5, C6, C7, C8, C9, C10, C13, C14 |
| 5 | TestPoint | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1, TP2, TP3, TP4, TP5 |
| 4 | R_Pack04 | Resistor_SMD:R_Array_Convex_4x0612 | RN1, RN2, RN3, RN4 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R7 |
| 3 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | 47uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C1, C12 |
| 2 | 74HC245 | Package_SO:SO-20_12.8x7.5mm_P1.27mm | U8, U10 |
| 2 | GND | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2 |
| 2 | H3-65756H-5 | Package_DIP:DIP-28_W7.62mm_Socket | U2, U7 |
| 1 | 27C512 | Package_DIP:DIP-28_W15.24mm_Socket | U3 |
| 1 | 680uF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C11 |
| 1 | 74AHC1G32 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U13 |
| 1 | 74HCT574 | Package_SO:SO-20_12.8x7.5mm_P1.27mm | U6 |
| 1 | 74LS138 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | ACO-14MHz | Package_DIP:DIP-14_W7.62mm_Socket | X1 |
| 1 | ATF22V10 | Package_DIP:DIP-24_W7.62mm_Socket | U4 |
| 1 | Clock | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x09 | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | J11 |
| 1 | DIN41612_02x32_AC | Connector_DIN:DIN41612_C_2x32_Male_Horizontal_THT | J1 |
| 1 | MAX1232 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | Ram1 Enable | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | SW_PWR | sim82:7x7DPDT | SW2 |
| 1 | SW_Reset | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP4 |
| 1 | W65C02SxP | Package_DIP:DIP-40_W15.24mm_Socket | U1 |
More from sim82/6502_sbc
9- 4 layers80.9 × 100.6 mm

- 2 layers119.4 × 91.4 mm

- 2 layers59.4 × 65.5 mm

- 4 layers101.6 × 70.1 mm

- 2 layers99.1 × 34.5 mm

- 2 layers

- 2 layers70.6 × 26.9 mm

- 2 layers120.6 × 92.7 mm

- 2 layers120.6 × 92.7 mm

Similar boards
- 4 layers181.5 × 182.3 mm

Stencil
jerry-kerenzikov/ytterbium
Project files for Ytterbium modular CPU platform and Yprog programming tool
421 partsCERN-OHL-S-2.0 - 2 layers235 × 176.5 mm

Cpu
Edgeworth/memepu
cmake -DUSEAFL=yes -DCMAKEBUILDTYPE=Release $PFX/verymeme AFLSKIPCPUFREQ=yes AFLPRELOAD=/usr/local/lib/afl/libdislocator.so \ afl-fuzz -m 1024M -i $PFX/verymeme/testdata/memelang/parsing -o memelangfuzz \ -x…
286 parts9GPL-3.0 - 4 layers251.5 × 116.8 mm

- 2 layers254 × 110.5 mm

- 4 layers170.2 × 170.2 mm

Motherboard
MicroLind-Developers/microlind-hw
Hardware repository for the microlind project
149 partsCERN-OHL-P-2.0 - 2 layers121.9 × 121.9 mm

Registers StackPointer
DutchMaker/DM-02
8-bit computer built (almost) entirely out of TTL logic chips
23 parts14 - 2 layers

Diffuino selector
elixpo/elixpo_chapter
Elixpo’s canonical collection for public build-and-release Chapters, bringing open-source software, reproducible research, hardware, and community contributions into one attributable record.
46 parts85 - 2 layers31.4 × 20.6 mm

Window sensor V5
gadjet/Window-Door-sensor-Version-5
Version 5 of the Window/Door sensor project this time with ultra low current consumption
32 parts70GPL-2.0
Questions
How big is the Cpu board 03 PCB?
It measures 99.1 × 94.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cpu board 03 use?
65 parts, built around the 74HC245D, 74AHC1G32GW, 74HCT574D and MAX1232CPA+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cpu board 03 KiCad files?
From the sim82/6502_sbc repository on GitHub, at the commit this page was made from: the board is kicad/cpu_board_03/cpu_board_03.kicad_pcb and its schematic kicad/backplane/backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cpu board 03 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).