2 layers96.6 × 82.8 mm
2 layers119.7 × 118.8 mm
Heartbie
SILLYIEST/HalfLifeHardwarecute little virtual pet on even cuter PCB
- Size
- 119.7 × 118.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 35
- Pads
- 78
- Tracks, vias
- 240, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 10 Oct 2026
- Updated
- 12 Oct 2026
Overview
Heartbie is an open-source printed circuit board by SILLYIEST, from the SILLYIEST/HalfLifeHardware repository on GitHub. It is a 2-layer board of 119.7 × 118.8 mm with 24 parts on 35 nets, routed with 240 tracks and 0 vias.
It is built around the DHT11. Its parts include 7 resistors, 6 diodes, 2 ICs, 2 connectors and 2 switches. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdHeartbie
Mini pet that you can interact with! (Based off of the starter project Starbie)
This was so fun to create! I love doing personal projects (despite having no prior experience here T-T)
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5, D6 |
| 6 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5, R6, R7 |
| 5 | LOGO | LOGO | G***, G***, G***, G***, G*** |
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x04_Pin | Imported Parts:Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | XIAO-ESP32-C3-SMD | Imported Parts:XIAO-ESP32-C3-SMD | U2 |
Questions
How big is the Heartbie PCB?
It measures 119.7 × 118.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Heartbie use?
24 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Heartbie KiCad files?
From the SILLYIEST/HalfLifeHardware repository on GitHub, at the commit this page was made from: the board is Week 1 - Heartbie/PCB/Heartbie.kicad_pcb and its schematic Week 1 - Heartbie/PCB/Heartbie.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Heartbie design in my own project?
Its repository states no licence, so its author keeps all rights: ask SILLYIEST before reusing the design.
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5