

Chess board iot
- Size
- 317.5 × 228.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 487
- Nets
- 311
- Pads
- 1,566
- Tracks, vias
- 2,823, 436
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Sep 2022
- Updated
- 15 Nov 2022
Overview
Chess board iot is an open-source printed circuit board by shuki25, from the shuki25/chess-board-pcb repository on GitHub. It is a 4-layer board of 317.5 × 228.6 mm with 487 parts on 311 nets, routed with 2,823 tracks and 436 vias.
It is built around the PCA9535CD, CP2102-GMR and ESP32-WROOM-32E, with the PCA9548APW, SRV05-4 and TXS0102DCU among its other parts. Its parts include 164 resistors, 138 capacitors, 75 ICs, 67 diodes and 10 switches. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
Main components
9PCA9535CD
SOIC-24-40℃~+85℃ 16 1uA 2.3V~5.5V 3mA PCA9535 Push-pull SOIC-24 Buffers, Drivers, Receivers, Transceivers ROHSNXP SemiconductorsBuffers, Drivers, Receivers, TransceiversCP2102-GMR
WQFN-28-EP(5x5)-40℃~+85℃ 1Mbps 20mA 3V~3.6V 80uA Transceiver USB 2.0 WQFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB ConvertersESP32-WROOM-32E
SMD,18x25.5mmSMD,18x25.5mm WiFi Modules ROHSEspressif SystemsWiFi ModulesPCA9548APW
TSSOP-242.3V~3.6V I2C、SMBus TSSOP-24 Interface - Specialized ROHSNXP SemiconductorsInterface - SpecializedSRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)TXS0102DCU
TSSOP82-Bit Bidirectionnal Voltage-Level Translator for Open-Drain and Push-Pull ApplicationsTexas InstrumentsUncategorisedXC6220B331MR-G
SOT-25-40℃~+85℃ 1 1A 3.3V 50dB@(1kHz) 655mV@(1A) 6V 8uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Output discharge Positive SOT-25 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsWS2813C
SMD5050-6P0.6mA 1.65mm 2kHz 5mm 800Kbit/s B:65mcd、R:280mcd、G:500mcd R:620nm~630nm、G:510nm~525nm、B:460nm~475nm 集成智能反向连接保护功能 SMD5050-6P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)S8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
README
README.mdchess-board-iot
Parts
487| Qty | Value | Footprint | References |
|---|---|---|---|
| 134 | 100nF | Capacitor_SMD:C_0603_1608Metric | C101, C105, C106, C108, C201, C202, C203, C204, C205, C206, C207, C208, C209, C210, C211, C212 +118 |
| 64 | 200 | Resistor_SMD:R_0603_1608Metric | R201, R202, R203, R204, R205, R206, R207, R208, R209, R210, R211, R212, R214, R215, R216, R217 +48 |
| 64 | 2K7 | Resistor_SMD:R_0603_1608Metric | R401, R402, R403, R404, R405, R406, R407, R408, R409, R410, R411, R412, R413, R414, R415, R416 +48 |
| 64 | UHE4913 | Package_TO_SOT_SMD:SOT-23 | U401, U402, U403, U404, U405, U406, U407, U408, U409, U410, U411, U412, U413, U414, U415, U416 +48 |
| 64 | WS2813C | LED_SMD:LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | D201, D202, D203, D204, D205, D206, D207, D208, D209, D210, D211, D212, D213, D214, D215, D216 +48 |
| 11 | 100K | Resistor_SMD:R_0603_1608Metric | R213, R305, R306, R307, R308, R309, R310, R311, R312, R313, R314 |
| 10 | SW_SPST | User Custom Footprint:Button_SW_12mm_1.8mm_hole | SW101, SW102, SW103, SW104, SW105, SW106, SW107, SW108, SW109, SW110 |
| 9 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_ISO7380 | H101, H102, H103, H104, H105, H106, H107, H108, H109 |
| 8 | 1K2 | Resistor_SMD:R_0603_1608Metric | R105, R106, R107, R108, R111, R112, R119, R120 |
| 6 | 10K | Resistor_SMD:R_0603_1608Metric | R101, R109, R110, R116, R117, R118 |
| 5 | 4K7 | Resistor_SMD:R_0603_1608Metric | R301, R302, R303, R304, R315 |
| 5 | PCA9535C | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U301, U302, U303, U304, U305 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R113, R114 |
| 2 | 5K1 | Resistor_SMD:R_0805_2012Metric | R102, R103 |
| 2 | G*** | kibuzzard-63276E09 | kibuzzard-63276E09, kibuzzard-63276E09 |
| 2 | G*** | kibuzzard-63276F1D | kibuzzard-63276F1D, kibuzzard-63276F1D |
| 2 | G*** | kibuzzard-63276D04 | kibuzzard-63276D04, kibuzzard-63276D04 |
| 2 | OLED_I2C | User Custom Footprint:OLED_128x32_I2C_4pins | OLED101, OLED102 |
| 2 | S8050 | Package_TO_SOT_SMD:SOT-23 | Q101, Q102 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C107 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R104 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C102 |
| 1 | 4.7nF | Capacitor_SMD:C_0603_1608Metric | C104 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C103 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R115 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | LED101 |
| 1 | CP2102-GMR | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U105 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J102 |
| 1 | Conn_02x03_Odd_Even | Tag_Connect:TC2030-IDC-NL | J104 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32 | U102 |
| 1 | G*** | kibuzzard-6328EBDE | kibuzzard-6328EBDE |
| 1 | G*** | kibuzzard-6327733E | kibuzzard-6327733E |
| 1 | G*** | kibuzzard-6327735A | kibuzzard-6327735A |
| 1 | G*** | kibuzzard-632FDCC2 | kibuzzard-632FDCC2 |
| 1 | G*** | kibuzzard-6327716B | kibuzzard-6327716B |
| 1 | G*** | kibuzzard-63276D94 | kibuzzard-63276D94 |
| 1 | G*** | kibuzzard-6327734C | kibuzzard-6327734C |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | LED102 |
| 1 | Micro_SD_Card_Det_Hirose_DM3CS-SF | User Custom Footprint:DM3CSSF | J103 |
| 1 | OLED_I2C | User Custom Footprint:OLED_128x64_I2C_4pins_0.96in | OLED103 |
| 1 | PCA9548APW | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U104 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | LED103 |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U103 |
| 1 | TXS0102DCU | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U201 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_JAE_DX07S016JA1R1500 | J101 |
| 1 | XC6220B331MR-G | Package_TO_SOT_SMD:SOT-23-5 | U101 |
The 485 most common of 487 parts.
Similar boards
- 4 layers89.8 × 92.5 mm

- 2 layers200 × 100 mm

Backplane
PurkkaKoodari/ktane-hw
Fully playable hardware implementation of Keep Talking and Nobody Explodes. Mirror of https://gitlab.com/PurkkaKoodari/ktane-hw
106 parts2MIT - 2 layers189.5 × 204.9 mm

SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!
749 parts292GPL-2.0 - 4 layers134.8 × 138.5 mm

- 2 layers71.1 × 120.9 mm

- 2 layers169.5 × 83.5 mm

GlowSignMainPCB
LEDs-by-glowingkitty/GlowSign
A battery powered LED sign for your laptop, or where ever else you want to use it!
130 parts1GPL-3.0 - 2 layers

- 2 layers48.4 × 97.3 mm

GlowTowerPCB
LEDs-by-glowingkitty/GlowTower
A beautiful looking LED lamp for lighting up your home or setting the right mood at house parties - with animations that can react to music.
57 parts9GPL-3.0
Questions
How big is the Chess board iot PCB?
It measures 317.5 × 228.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Chess board iot use?
487 parts, built around the PCA9535CD, CP2102-GMR, ESP32-WROOM-32E and PCA9548APW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Chess board iot KiCad files?
From the shuki25/chess-board-pcb repository on GitHub, at the commit this page was made from: the board is chess-board-iot.kicad_pcb and its schematic chess-board-iot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Chess board iot design in my own project?
Its repository states no licence, so its author keeps all rights: ask shuki25 before reusing the design.