

Vfd night projector clock
The VFD Night Projector Clock is the first and only (at the moment and to my knowledge 😁) night projecting clock that uses a VFD display.
- Size
- 43 × 62.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 72
- Nets
- 69
- Pads
- 247
- Tracks, vias
- 429, 70
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Nov 2023
- Updated
- 15 Nov 2023
Overview
Vfd night projector clock is an open-source printed circuit board by shufps, from the shufps/vfd-night-projector-clock repository on GitHub, published under the MIT licence. It is a 4-layer board of 43 × 62.3 mm with 72 parts on 69 nets, routed with 429 tracks and 70 vias.
It is built around the IES0105S24, 2EDN7524F and LM1117MP-3.3, with the BSS84 among its other parts. Its parts include 25 resistors, 15 capacitors, 14 transistors, 6 ICs and 3 switches. It belongs with the lEDs and displays boards and the STM32 boards of this library.
Main components
4IES0105S24
SMD-5P,13.2x8.5mmSMD-5P,13.2x8.5mm Isolated Power Modules ROHSXP PowerIsolated Power Modules2EDN7524F
DSO-8-40℃~+150℃ 1.98V~2.2V 17ns 19ns 2 4.5V~20V 4.5ns 5.3ns 5A 5A 950mV~1.1V Low Side MOSFET Under Voltage Protection DSO-8 Gate Drivers ROHSInfineon TechnologiesGate DriversLM1117MP-3.3
SOT-2230℃~+125℃@(Ta) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA 99uVrms Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdvfd-night-clock
Description
The VFD Night Projector Clock is the first and only (at the moment and to my knowledge 😁) night projecting clock that uses a VFD display.
When receiving one of the NOS IVL2-7/5 displays, I noticed that the illuminated area could fit in about full-format (24x36mm) what was standard in analogue photography.
For this reason there are plenty of old lenses (e.g. with M42 threading) out there that almost cost nothing anymore although they have impressive technical properties like 1:2.8 with f=135.
Moreover, they have a flange focal distance of 45.46mm which allows to build a relatively compact casing.
So here it is ... 🥳
This image shows a comparison between my old radio clock with projector and the VFD night clock projector:
The brighness is perfect in the night 👌 (but ofc barely visible at day)
If everything is adjusted properly, you even can see the grid on the digits:
Properties
There are some methods how a VFD can be operated. After some prior experience with VFDs this is one of the easiest methods:
- isolated 24 DCDC converter for anode voltage. The V+ is connected to GND, so you have -24V on the board
- the positive gate/segment voltage is +3.3V. You easily can switch the positive gate/segment voltage with BSS84s from a STM32 with no additional parts what is the easiest solution. This gives a total gate / segment voltage of 27.3V
- AC Filament drive is done with a full-bridge made of a two channel MOSFET driver. The output is AC coupled and pulled to about -22V. Bias is adjustable (even could be used to change the brightness)
STM32 Software
The STM32 software currently only supports a json-rpc via USB virtual COM port (CDC). Buttons are currently unused 🙈
There is python code that can
- measure the clock accuracy
- set the time
- set the display state and auto-switch on/off
This are small examples that nicely demonstrate how to use the json-rpc.
3D case
The case was designed in a way that no supports are needed. The upper part is simply clipped on the lower part.
Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 47k | Resistor_SMD:R_0805_2012Metric | R4, R7, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22 |
| 14 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14 |
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C5, C6, C9, C15 |
| 5 | 10µF/50V | Capacitor_SMD:C_1206_3216Metric | C2, C8, C10, C11, C13 |
| 3 | SW_SPST | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW3, SW4, SW5 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R24, R25 |
| 2 | 10µ/50V | Capacitor_SMD:CP_Elec_5x5.4 | C7, C12 |
| 2 | 15R | Resistor_SMD:R_2010_5025Metric | R3, R5 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R27, R28 |
| 2 | 6pF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R23 |
| 1 | 10k | Potentiometer_SMD:Potentiometer_Bourns_3269W_Vertical | RV1 |
| 1 | 1µ/50V | Capacitor_SMD:C_1206_3216Metric | C14 |
| 1 | 2EDN7524F | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | 36k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | Crystal | Crystal:Crystal_SMD_EuroQuartz_EQ161-2Pin_3.2x1.5mm | Y1 |
| 1 | IES0105S24 | myfootprints:IES0105S24-dcdc | U5 |
| 1 | IVL2-7_5 | myfootprints:ILV2-5_7 | U1 |
| 1 | LM1117MP-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | MYUSB_B | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | P1 |
| 1 | STM32L052K6Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U3 |
| 1 | SWD | myfootprints:PinHeader_IDC_2x05_P1.27mm_Vertical_SMD | J1 |
| 1 | TLV9301xDBV | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | x | Resistor_SMD:R_0805_2012Metric | R8 |
The 67 most common of 72 parts.
Similar boards
- 4 layers100 × 100 mm

- 2 layers82.1 × 82.1 mm

Uncut Gem
QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
207 parts210AGPL-3.0 - 4 layers126.6 × 37.7 mm

Gruzik2.0
NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition
50 parts101MIT - 2 layers93.1 × 33.7 mm

FT817-BT JDY67
BG6LH/FT-81x-BT-DIGI-Adaptor
A PCB Design of Bluetooth DIGI Adaptor for Yaesu FT-817/818 Series Transceivers
34 parts70 - 4 layers133.1 × 126.6 mm

- 4 layers46 × 110 mm

Aware01 h7 rev2 0
95lux/aware01
Aarebot is a dynamic realtime sampler built as a Eurorack module. At its core is a stereo tape-style engine with a hot-swapping record/playback buffer - this enables to record and play simultaneously.
158 parts15GPL-3.0 - 2 layers75.9 × 50.1 mm

Suspension telemetry
porast1/suspension-telemetry
Suspension telemetry system for mountain bike or dirt bike
77 parts14MIT - 2 layers115 × 115 mm

Questions
How big is the Vfd night projector clock PCB?
It measures 43 × 62.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Vfd night projector clock use?
72 parts, built around the IES0105S24, 2EDN7524F, LM1117MP-3.3 and BSS84. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vfd night projector clock KiCad files?
From the shufps/vfd-night-projector-clock repository on GitHub, at the commit this page was made from: the board is kicad/vfd-night-projector-clock.kicad_pcb and its schematic kicad/vfd-night-projector-clock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vfd night projector clock design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).