

MicoThePetBot
- Size
- 19.4 × 35.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 40
- Pads
- 88
- Tracks, vias
- 101, 21
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Apr 2026
- Updated
- 26 Jul 2026
Overview
MicoThePetBot is an open-source printed circuit board by shubhamp2007, from the shubhamp2007/MicoThePetBot repository on GitHub. It is a 2-layer board of 19.4 × 35.5 mm with 11 parts on 40 nets, routed with 101 tracks and 21 vias.
It is built around the ESP32-S3-WROOM-1-N8, BME280 and AMS1117, with the TP4056 and VL53L0X among its other parts. Its parts include 7 connectors and 2 ICs. It belongs with the ESP32 boards of this library.
Main components
5ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesBME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity SensorAMS1117
1.0 A Low-Dropout Fixed RegulatorAdvanced Monolithic SystemsUncategorisedTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery ManagementVL53L0X
LGA-12LGA-12 New Arrivals ROHSSTMicroelectronicsUncategorised
README
README.mdMico The Pet Bot
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | AMS1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BME280 | Connector_PinSocket_1.27mm:PinSocket_1x04_P1.27mm_Vertical | J4 |
| 1 | Conn_01x08 | Connector_PinSocket_1.27mm:PinSocket_1x08_P1.27mm_Vertical | J1 |
| 1 | ESP32-S3-WROOM-1 | Espressif:ESP32-S3-WROOM-1 | U1 |
| 1 | INMP441_L | Connector_PinSocket_1.27mm:PinSocket_1x03_P1.27mm_Vertical | J6 |
| 1 | INMP441_R | Connector_PinSocket_1.27mm:PinSocket_1x03_P1.27mm_Vertical | J5 |
| 1 | MAX98357A | Connector_PinSocket_1.27mm:PinSocket_1x07_P1.27mm_Vertical | J8 |
| 1 | TP4056 | Connector_PinSocket_1.27mm:PinSocket_1x02_P1.27mm_Vertical | J2 |
| 1 | VL53L0X | Connector_PinSocket_1.27mm:PinSocket_1x04_P1.27mm_Vertical | J3 |
The 9 most common of 11 parts.
Similar boards
- 2 layers100 × 80 mm

- 4 layers106.4 × 66.8 mm

Pip boy V1
benjaminbardossy-dotcom/wrist-boy
A small WIP device which takes in external information through a variety of sensors, which can be mounted to your wrist for easy access.
41 partsMIT - 4 layers34 × 28 mm

Device
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
30 parts - 2 layers
/Old%200/Misc%20Circuits%20%26%20Adapters/Misc%20Circuits%20%26%20Adapters.kicad_pcb.jpg?size=s&soon)
- 2 layers100 × 100 mm

Weerstation main
tjallingk/airostation
some pcbs for diy outdoor data sensor for weather and air quality monitoring using mostly i2c and an esp32 dev board. not really tested.
55 parts - 2 layers100 × 100 mm

- 2 layers60 × 60 mm

Lora board
acseka360/sws_lsb
The interactive BOM webpage helps during assembly. You can mark components placed and check their exact types.
22 parts - 2 layers100 × 100 mm

PcbV10
klaus-liebler/labathome
Der kleine Bruder von lab@home. Ermöglicht das Experimentieren mit PT1...PTn-Gliedern, die intern als RC-Kombination (entkoppelt über Operationsverstärker) ausgeführt sind.
221 parts5MIT
Questions
How big is the MicoThePetBot PCB?
It measures 19.4 × 35.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MicoThePetBot use?
11 parts, built around the ESP32-S3-WROOM-1-N8, BME280, AMS1117 and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MicoThePetBot KiCad files?
From the shubhamp2007/MicoThePetBot repository on GitHub, at the commit this page was made from: the board is MicoThePetBot.kicad_pcb and its schematic MicoThePetBot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MicoThePetBot design in my own project?
Its repository states no licence, so its author keeps all rights: ask shubhamp2007 before reusing the design.