
Feather STM32WB55
makeristic/Feather_STM32WB55
KiCad STM32WB55 Bluetooth development board in the Adafruit Feather form factor, with USB-C and STEMMA QT. Work in progress.

A minature, custom-made board that controls vehicles and streams onboard telemetry.
Delta is an open-source printed circuit board by shreyaslad, from the shreyaslad/delta repository on GitHub. It is a 4-layer board of 88.9 × 50.2 mm with 76 parts on 101 nets.
It is built around the BL8071CLATR33, CJ7805 3% and PI4ULS5V202UEX, with the TPRT9193-18GB and NN01-102 among its other parts. Its parts include 26 capacitors, 24 resistors, 7 ICs, 6 connectors and 4 diodes. It belongs with the ESP32 boards of this library.
Delta is a minature, custom board that remotely control vehicles, connecting to the Onboard Diagnostics (OBD-II) port and streaming real-time onboard sensor data such as:
and integrating external cameras and sensors.
Delta supports WiFi and Bluetooth LE, running a dual-core ESP32-S3R8V based on the 32-bit Xtensa architecture. The current prototype is only 32mm * 37mm with single-sided assembly, packing a ton of components into an incredibly small area. Delta can be powered by a computer through the USB Type-C port or independantly with a 12v car battery.
.
├── docs : Project documentation
├── firmware : Delta firmware
├── iot : AWS IoT infrastructure
├── pcb : KiCad PCB design files
└── README.mdFeatures:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R3, R9, R10, R11, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24 |
| 9 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C13, C14, C15, C16, C19, C22 |
| 6 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C12, C20, C21, C24, C25, C26 |
| 6 | 1uF | Capacitor_SMD:C_1206_3216Metric | C5, C6, C10, C11, C17, C18 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R8, R12 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R2, R4 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 60 | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | D | Diode_SMD:D_0603_1608Metric | D2, D4 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 270 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 2pF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 4.7nF | Capacitor_SMD:C_0603_1608Metric | C23 |
| 1 | 40 MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 5.1nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | C401677 | Package_TO_SOT_SMD:SOT-223 | U3 |
| 1 | CJ78053% | C21706:TO-252-2_L6.6-W6.1-P4.58-LS10.1-BR-CW | U4 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | Conn_01x16 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J5 |
| 1 | ESP32-S3R8V | ESP32-S3R8V:QFN40P700X700X90-57N | U2 |
| 1 | FLASH | TS-3025-A-A-B:SW-SMD_L3.0-W2.5-P3.40-LS4.0-L | SW2 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | Micro_SD_Card | 5033981892:MOLEX_503398-1892 | J6 |
| 1 | NN01-102 | NN01-102:XCVR_NN01-102 | E1 |
| 1 | PI4ULS5V202UEX | Package_SO:MSOP-8_3x3mm_P0.65mm | U1 |
| 1 | PWR BLUE | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | QST_QMI8610 | QST_QMI8610:LGA-16_L3.3-W3.3-P0.50-BL-EP0.5 | U7 |
| 1 | RESET | TS-3025-A-A-B:SW-SMD_L3.0-W2.5-P3.40-LS4.0-L | SW1 |
| 1 | TJA1441AT-0Z | TJA1441DT-0Z:TJA1441DT-0Z | U6 |
| 1 | TPRT9193-18GB | TPRT9193:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BL | U5 |
| 1 | USB_C_Receptacle_USB2.0 | TYPE-C-31-M-12:HRO_TYPE-C-31-M-12 | J1 |

makeristic/Feather_STM32WB55
KiCad STM32WB55 Bluetooth development board in the Adafruit Feather form factor, with USB-C and STEMMA QT. Work in progress.


Jh0115/Unified-Kinematic-DAQ
This project is kicad and programming to to develop a micro volume and micro-power PCB with a BNO055, BME280, SD card, and a way to send data do other boards.

menloresearch/asimov-1
v1 of Asimov, an open-source humanoid robot

kingyoPiyo/RasPico_SHIBAKI_Board
SFP module test board for Raspberry Pi Pico

skuep/GBB15
A gantry-mounted CAN stepper driver board for 15mm aluminum beams (mostly for PrintersForAnts printers). This is heavily work in progress.

tomkinsc/open-spectrometer
Code, mechanical designs, and electronic plans related to the OpenSpectrometer project.

khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries
It measures 88.9 × 50.2 mm and has 4 copper layers, 1.59 mm thick.
76 parts, built around the BL8071CLATR33, CJ7805 3%, PI4ULS5V202UEX and TPRT9193-18GB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the shreyaslad/delta repository on GitHub, at the commit this page was made from: the board is pcb/delta.kicad_pcb and its schematic pcb/delta.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask shreyaslad before reusing the design.