Skip to the content
2 layers41.1 × 53.2 mmESP32 Devoard, the printed circuit board in 3D

ESP32 Devoard

shreejita56/ESP32-

So I made a simple Dev-board based on ESP32-S3-WROOM-1 . It has a USB-C for Communication and has all possible pin available on the Rp2040 . Boot/EN Pins 3.3V Voltage regulator on board LEDS .

Size
41.1 × 53.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
23
Nets
48
Pads
170
Tracks, vias
429, 81
Pours
6
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Oct 2026
Updated
22 Oct 2026

Overview

ESP32 Devoard is an open-source printed circuit board by shreejita56, from the shreejita56/ESP32- repository on GitHub. It is a 2-layer board of 41.1 × 53.2 mm with 23 parts on 48 nets, routed with 429 tracks and 81 vias.

It is built around the ESP32-S3-WROOM-1-N8 and AP63203WU. Its parts include 7 capacitors, 7 resistors, 3 connectors, 2 ICs and 2 switches. It belongs with the ESP32 boards of this library.

Main components

2

README

README.md

ESP32-

Screenshot 2026-10-22 230612

So I made a simple Dev-board based on ESP32-S3-WROOM-1 . It has a USB-C for Communication and has all possible pin available on the Rp2040 . Boot/EN Pins 3.3V Voltage regulator on board LEDS . I tried to make it in a concise design. It was designed On kicad.

Features

  • The Board uses USB-C for power and data transfer
  • The Board is based on ESP32-S3-WROOM-1
  • We have an onboard 3.3V Voltage regulator (AP63203WU)
  • We also have EN/Boot pin for booting and uploading new firmware
  • there is 2 set of 20 connector pins that connects to all possible pin outlets available on the MCU
  • The PCB was Designed on Kicad
  • It is Breadboard Compatible

Schematcics

Screenshot 2026-10-17 224025

PCB/CAD

Screenshot 2026-10-22 230830 Screenshot 2026-10-22 230612 Screenshot 2026-10-22 230618

Bill of Materials (BOM)

DesignationCommentQuantityTotal Price ($)Link
C147uF21.2342JLCPCB
C210uF20.5440JLCPCB
C3100nF20.1640JLCPCB
C4, C522uF40.6260JLCPCB
D1LED20.3940JLCPCB
J1USB_C_Receptacle_USB2.0_16P24.1336JLCPCB
L14.7uH20.5020JLCPCB
R1, R23340.0480JLCPCB
R3, R45.1K40.0300JLCPCB
R71K20.0360JLCPCB
U2AP63203WU26.1155JLCPCB
U3ESP32-S3-WROOM-1210.3502JLCPCB
PCB FabricationPCB cost14.0000—
ShippingShipping fee111.8700—
Feeders Loading feeAssembly service fee118.6000—
SMT AssemblyAssembly service fee10.8800—
X-Ray InspectionInspection fee13.3000—
Packaging feePackaging fee10.5000—
Special components feeSpecial components fee10.0600—
GRAND TOTALAll components, PCB, shipping and fees—63.39—

Parts

23
QtyValueFootprintReferences
222ufCapacitor_SMD:C_0603_1608MetricC4, C5
233Resistor_SMD:R_0603_1608MetricR1, R2
25.1 KResistor_SMD:R_0603_1608MetricR3, R4
2CCapacitor_SMD:C_0603_1608MetricC6, C7
2Conn_01x20_PinConnector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_VerticalJ2, J3
2RCapacitor_SMD:C_0603_1608MetricR5, R6
2SW_PushButton_Switch_SMD:SW_SPST_PTS810SW1, SW2
1100nfCapacitor_SMD:C_0603_1608MetricC3
110ufCapacitor_SMD:C_0603_1608MetricC2
11KCapacitor_SMD:C_0603_1608MetricR7
14.7uhInductor_SMD:L_0603_1608MetricL1
147ufCapacitor_SMD:C_0603_1608MetricC1
1AP63203WUPackage_TO_SOT_SMD:TSOT-23-6U2
1ESP32-S3-WROOM-1RF_Module:ESP32-S3-WROOM-1U3
1LEDCapacitor_SMD:C_0603_1608MetricD1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASVJ1

Similar boards

  • 2 layers137 × 84 mmESP32-Geiger Counter, the printed circuit board in 3D

    ESP32-Geiger Counter

    AronASzucs/Avalanche32

    Handheld ESP32-S3 Geiger counter with a firmware-regulated 400 V boost, SBM-20 tube, USB-C charging and OLED display.

    89 parts3
  • 2 layers101.9 × 82.3 mmNivara Controls, the printed circuit board in 3D

    Nivara Controls

    Gabriel-dot-hub/Gabriel_Ortiz_Electiva_2025_C2

    Repositorio para las clases de la electiva con el profesor Carlos Antonio Pichardo Viuque

    91 parts2
  • 4 layers100 × 100 mmBrain, the printed circuit board in 3D

    Brain

    Pegoku/SarcasmOS

    Personal assistant characterized by Bender from Futurama

    225 parts2
  • 2 layers203.1 × 108.1 mmESP32 Breakouts Playground, the printed circuit board in 3D

    ESP32 Breakouts Playground

    PockyBum522/cad-pcb-projects

    Various PCB projects, mostly in KiCad

    117 parts2MIT
  • 4 layers80 × 50 mmGlowbuck, the printed circuit board in 3D

    Glowbuck

    Diamantenmine/glowbuck

    Together with Firefly Luciferin, you can create your own ambilight that connects via USB-C to your computer and draws power from a USB-C PD power supply. Glowbuck is in no way associated with the linked project.

    132 parts1GPL-3.0
  • 2 layers163 × 75.8 mmProjeto, the printed circuit board in 3D

    Projeto

    AlisonTristao/bally_robot

    Porjeto de Hardware - Bally

    97 parts
  • 4 layers102.2 × 83 mmZorionx nivara, the printed circuit board in 3D

    Zorionx nivara

    BRYANSFM/Bryan_Fernandez_ELECTIVA_2025_C2

    132 parts

Questions

How big is the ESP32 Devoard PCB?

It measures 41.1 × 53.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP32 Devoard use?

23 parts, built around the ESP32-S3-WROOM-1-N8 and AP63203WU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32 Devoard KiCad files?

From the shreejita56/ESP32- repository on GitHub, at the commit this page was made from: the board is PCB/ESP32 Devoard.kicad_pcb and its schematic PCB/ESP32 Devoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32 Devoard design in my own project?

Its repository states no licence, so its author keeps all rights: ask shreejita56 before reusing the design.