
DonConIOmini
ravinrabbid/DonCon2040
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

The Arduino UNO ADC Shield is a custom-designed expansion board that fits directly on top of the Arduino UNO, matching its exact header alignment and mechanical form factor. It extends the UNO’s functionality with additional analog-to-digital conversion, an onboard startup LED, and a prototyping area for custom circuit development
Arduino Uno Header #1 is an open-source printed circuit board by shmmolo, from the shmmolo/PCB-Arduino_UNO_ADC_Shield repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 21 parts on 175 nets, routed with 146 tracks and 9 vias.
It is built around the MCP3204-CI/P. Its parts include 5 connectors, 3 ICs, 2 capacitors, 1 resistor and 1 diode.
A custom-designed Arduino UNO-compatible shield featuring a 12-bit ADC, op-amp buffer, startup LED, and a 9×17 prototyping grid.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Conn_01x17_Pin | Connector_PinHeader_2.54mm:PinHeader_1x17_P2.54mm_Vertical | JB1, JB2, JB3, JB4, JB5, JB6, JB7, JB8, JB9 |
| 2 | 100n | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 2 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1, J3 |
| 1 | 660 | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x10_Socket | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J4 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | MCP3204 | ADC-12bit:MCP3204 | U1 |
| 1 | MCP6001-OT | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U2 |

ravinrabbid/DonCon2040
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers


itaiko-project/ITAIKO-hardware
An open source Taiko no Tatsujin drum, originally based on Kasashiki's HIDtaiko and ravinrabbid's DonCon2040.





Bobrowicz/DAC-ADC-SPI-Module
Small PCB module featuring SPI connected 12 bit two channel DAC and 12 bit four channel ADC wih external reference.
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the MCP3204-CI/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the shmmolo/PCB-Arduino_UNO_ADC_Shield repository on GitHub, at the commit this page was made from: the board is Hardware/Arduino Uno Header #1.kicad_pcb and its schematic Hardware/Arduino Uno Header #1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask shmmolo before reusing the design.