Skip to the content
2 layers61 × 86 mmInterface, the printed circuit board in 3D

A Diablo disk emulator for use with a Xerox Alto

Size
61 × 86 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
76
Pads
207
Tracks, vias
570, 60
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
22 Jul 2025
Updated
22 Jul 2025

Overview

Interface is an open-source printed circuit board by shirriff, from the shirriff/alto-disk-emulator repository on GitHub. It is a 2-layer board of 61 × 86 mm with 21 parts on 76 nets, routed with 570 tracks and 60 vias.

It is built around the 74ACT240, 74LVC245AD and TEENSY 4.1. Its parts include 5 ICs, 4 capacitors, 4 resistors, 2 connectors and 1 diode. It belongs with the interfaces and adapters boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

3

README

README.md

A Diablo disk emulator for use with a Xerox Alto

Note: This is still under development and is not working yet

The concept is a small box that you can plug into the Alto's disk interface, replacing the Diablo disk. The box will emulate the disk drive, using a disk image from a SD card.

The hardware design is in the interface directory. It is based on a Teensy 4.1 microcontroller and uses a LCD touch screen as the user interface.

The driver software is in the TestApp directory.

Parts

21
QtyValueFootprintReferences
4.1uFCapacitors_ThroughHole:C_Disc_D3.0mm_W1.6mm_P2.50mmC1, C2, C3, C4
4MountingHoleinterface:MountingHole_M3H1, H2, H3, H4
3100Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2, R3, R4
274ACT240Housings_DIP:DIP-20_W7.62mmU4, U5
274LVC245Housings_DIP:DIP-20_W7.62mmU2, U3
1180Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1Conn_01x40_Femaleinterface:connector-2x20J1
1LED_RGBCSparkFun:LED-RGB-THRUD1
1Screen connectorPin_Headers:Pin_Header_Straight_1x14_Pitch2.54mmJ2
1Teensy4.1interface:Teensy41_simpleU1
1TestPointPin_Headers:Pin_Header_Straight_1x01_Pitch2.54mmGND

More from shirriff/alto-disk-emulator

1
  • 2 layers86 × 50 mmInterface36, the printed circuit board in 3D

    Interface36

    shirriff/alto-disk-emulator

    A Diablo disk emulator for use with a Xerox Alto

    21 parts1

Similar boards

  • 2 layers68.1 × 98.9 mmIntellicart, the printed circuit board in 3D

    Intellicart

    intelliputer/intellicart

    Cartridge project and development of custom ROM

    22 partsGPL-3.0
  • 2 layers112.4 × 74.2 mmAppleVGA, the printed circuit board in 3D

    AppleVGA

    markadev/AppleII-VGA

    VGA card for Apple II+/IIe computer

    35 parts207MIT
  • 2 layers89.5 × 77.5 mmApple2-IO RPi, the printed circuit board in 3D

    Apple2-IO RPi

    tjboldt/Apple2-IO-RPi

    Apple II expansion card using a Raspberry Pi for I/O

    24 parts140MIT
  • 6 layers304.8 × 243.8 mmAmigaPCI MainBoard, the printed circuit board in 3D

    AmigaPCI MainBoard

    AmigaPCI/AmigaPCI-MainBoard

    Amiga with Native PCI Bus

    748 parts135
  • 2 layers96 × 71.6 mmA2DVI.v1.6, the printed circuit board in 3D

    A2DVI.v1.6

    rallepalaveev/A2DVI

    This is based on Clintech Pico Board (CPB) with 48 GPIOs, most 5V tolerant.

    112 parts82MIT
  • 4 layers223.3 × 120.1 mmISA FPGA v2, the printed circuit board in 3D

    ISA FPGA v2

    robfinch/Cores

    Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.

    132 parts78
  • 4 layers318.4 × 124.5 mmN2360, the printed circuit board in 3D

    N2360

    jasonsbeer/Amiga-N2630

    A re-imagining of the Amiga A2630 processor card.

    248 parts69
  • 4 layers102.6 × 107.3 mmPro rev1, the printed circuit board in 3D

    Pro rev1

    TheRetroWeb/PicoPOST

    RPi Pico based POST (Power-On Self Test) Diagnostic Card

    136 parts58

Questions

How big is the Interface PCB?

It measures 61 × 86 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Interface use?

21 parts, built around the 74ACT240, 74LVC245AD and TEENSY 4.1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Interface KiCad files?

From the shirriff/alto-disk-emulator repository on GitHub, at the commit this page was made from: the board is interface/interface.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Interface design in my own project?

Its repository states no licence, so its author keeps all rights: ask shirriff before reusing the design.