

Switchboard Shack alt
A 4 port remote Antenna Switcher.
- Size
- 76.2 × 65.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 26
- Pads
- 80
- Tracks, vias
- 101, 60
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Mar 2026
- Updated
- 28 Mar 2026
Overview
Switchboard Shack alt is an open-source printed circuit board by shinaka, from the shinaka/switchboard-pio repository on GitHub. It is a 2-layer board of 76.2 × 65.3 mm with 28 parts on 26 nets, routed with 101 tracks and 60 vias.
It is built around the LM2596T-5.0, PN2222A and SRR1260-330M. Its parts include 10 resistors, 4 capacitors, 3 connectors, 1 IC and 1 diode.
Main components
3LM2596T-5.0
TO-220-5-40℃~+125℃@(TJ) 1 150kHz 3A 4.5V~40V 5V 5mA Buck Buck Built-in Fixed No TO-220-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersPN2222A
TO-92-3-55℃~+150℃ 1 NPN 1A 300MHz 300mV 40V 625mW NPN TO-92-3 Bipolar (BJT) ROHSNTE ElectronicsBipolar (BJT)SRR1260-330M
SMD,12.5x12.5mm2.8A 33uH 3A 60mΩ ±20% SMD,12.5x12.5mm Power Inductors ROHSBournsPower Inductors
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R7, R8, R9, R10 |
| 4 | 33K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5, R6 |
| 2 | 100nF MLCC | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C4 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 100uF 35V electrolytic | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 1N5822 | Diode_THT:D_DO-201AD_P12.70mm_Horizontal | D1 |
| 1 | 470uF 10V electrolytic | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C3 |
| 1 | 5749268-1 | SamacSys_Parts:57492681 | J1 |
| 1 | HW-040 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J3 |
| 1 | LM2596T-5 | Package_TO_SOT_THT:TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical | U1 |
| 1 | PN2222A | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | SRR1260-330M | SamacSys_Parts:SRR1260-150M | L1 |
| 1 | SSD1306 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | ~ | Library:XIAO_ESP32C3_FINAL_v2 | ESP32-C1 |
The 24 most common of 28 parts.
More from shinaka/switchboard-pio
1- 2 layers53.3 × 43.2 mm

Similar boards
- 4 layers87.6 × 46.7 mm

Modbus to x
joachimda/modbus-to-x
ESP32 based hardware and firmware stack that bridges modbus RTU devices to modern network services.
58 parts5MIT - 2 layers42.1 × 24.2 mm

- 4 layers95 × 105 mm

Soiling
julianbustamante13/Proyecto-Soiling-PCB
Archivos correspondientes al diseño de PCB del dispositivo medidor de Soiling para paneles solares fotovoltaicos.
86 parts - 2 layers103.3 × 63.7 mm

- 2 layers138.4 × 91.4 mm

STM32 MegaBlaster
AidanHockey5/STM32_VGM_Player_YM2612_SN76489
A Sega Genesis music player based off of the STM32 BluePill board and real YM2612+SN76489 sound chips.
96 parts117AGPL-3.0 - 2 layers112.6 × 85.4 mm

- 2 layers96.9 × 110.7 mm

- 2 layers80.7 × 34.1 mm

5V regulated safe power supply
anujthakur512/Buck-Converter-5V
I build a Buck Converter (5V) using IC LM2596 on KiCad as my 1st project of learning PCB Designing.
16 parts3MIT
Questions
How big is the Switchboard Shack alt PCB?
It measures 76.2 × 65.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Switchboard Shack alt use?
28 parts, built around the LM2596T-5.0, PN2222A and SRR1260-330M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Switchboard Shack alt KiCad files?
From the shinaka/switchboard-pio repository on GitHub, at the commit this page was made from: the board is PCBs/Switchboard-Shack/Switchboard-Shack_alt.kicad_pcb and its schematic PCBs/Switchboard-Mast/Switchboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Switchboard Shack alt design in my own project?
Its repository states no licence, so its author keeps all rights: ask shinaka before reusing the design.