
Estim breakout
rasterizednet/raspberry-pi-estim
This repo includes kicad projects for the raspbi controller, and estim breakout, as well as the AVR source code for the estim breakout.

An portable handheld soldering iron
PIRON is an open-source printed circuit board by shaunak153, from the shaunak153/PIRON repository on GitHub. It is a 2-layer board of 130 × 20 mm with 46 parts on 62 nets, routed with 488 tracks and 228 vias.
It is built around the CH224K, MCP602-I/P and AMS1117-3.3, with the MBR0530, BC847 and IRFR9024NTRPBF among its other parts. Its parts include 17 resistors, 12 capacitors, 7 connectors, 4 ICs and 2 diodes. It belongs with the STM32 boards of this library.




| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C5, C6, C7, C8, C10, C11 |
| 4 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R4, R9, R11 |
| 3 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R7, R12 |
| 2 | 0R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10, R14 |
| 2 | 100K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R15 |
| 2 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3 |
| 2 | 22uf/Tantalium | Capacitor_Tantalum_SMD:CP_EIA-6032-15_Kemet-U_Pad2.25x2.35mm_HandSolder | C9, C12 |
| 2 | MBR0530 | Diode_SMD:D_SOD-123 | D1, D2 |
| 1 | 0.05R | Resistor_SMD:R_1206_3216Metric | R5 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17 |
| 1 | 15K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R16 |
| 1 | 1OK | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | 27K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CH224K | Package_SO:SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm | U1 |
| 1 | IRFR9024NTRPBF | Package_TO_SOT_SMD:TO-252-2 | Q2 |
| 1 | KEY1 | Button_Switch_SMD:SW_SPST_SKQG_WithoutStem | SW1 |
| 1 | KEY2 | Button_Switch_SMD:SW_SPST_SKQG_WithoutStem | SW2 |
| 1 | MCP602 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | OLED | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | PROGRAM | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | SUP | Fuse:Fuseholder_Littlefuse_102_122_single | J7 |
| 1 | T+ | Fuse:Fuseholder_Littlefuse_102_122_single | J5 |
| 1 | T- | Fuse:Fuseholder_Littlefuse_102_122_single | J6 |
| 1 | TBD | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J4 |
| 1 | VIB_SW | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |

rasterizednet/raspberry-pi-estim
This repo includes kicad projects for the raspbi controller, and estim breakout, as well as the AVR source code for the estim breakout.




punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

MorgenWebDigital/airquality
A battery-powered indoor air quality monitor. Real CO₂ from a photoacoustic sensor, VOC and NOx, temperature, humidity and ambient light, shown on a 2.13" e-paper display and sent over Bluetooth LE.


It measures 130 × 20 mm and has 2 copper layers, 1.6 mm thick.
46 parts, built around the CH224K, MCP602-I/P, AMS1117-3.3 and MBR0530. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the shaunak153/PIRON repository on GitHub, at the commit this page was made from: the board is layout/Piron.kicad_pcb and its schematic layout/Piron.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask shaunak153 before reusing the design.