

Bord λ principial
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 78
- Pads
- 219
- Tracks, vias
- 383, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Mar 2021
- Updated
- 3 Jun 2024
Overview
Bord λ principial is an open-source printed circuit board by Alex2269, from the Alex2269/stm32_tft_spi repository on GitHub. It is a 2-layer board with 73 parts on 78 nets, routed with 383 tracks and 0 vias.
It is built around the MCP602-I/P, IR4427PBF and AMS1117-3.3, with the AMS1117-5.0, LM1117-2.5 and LR7843-VB among its other parts. Its parts include 36 resistors, 13 connectors, 10 capacitors, 9 ICs and 3 inductors.
Main components
6MCP602-I/P
PDIP-8-40℃~+85℃ 1pA 1pA 2 2.3V/us 2.5uV/℃ 2.7V~6V 2.8MHz 22mA 230uA 29nV/√Hz@1kHz 700uV 90dB Built-in compensation、ESD protection Rail-to-rail output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierIR4427PBF
PDIP-8-40℃~+150℃ 1.5A 1.5A 100uA 10ns 15ns 2 6V~20V IGBT、MOSFET Low Side PDIP-8 Gate Drivers ROHSInfineon TechnologiesGate DriversAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM1117-2.5
SOT-2231 1.3V@(1000mA) 15V 1A 2.5V 2mA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedLR7843-VB
TO-252-55℃~+175℃ 1 N-channel 1.725nF 120A 2.3mΩ@10V、3.2mΩ@4.5V 2.5V 250W 30V 6.201nF 81.5nC@4.5V、171nC@10V 970pF N-Channel TO-252 MOSFETs ROHSVBsemi ElecMOSFETs
README
README.mdstm32_tft_spi
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | Conn_01x01_Female | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2 |
| 10 | 43k | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R7, R8, R12, R13, R14, R20, R21 |
| 6 | 1uF | Resistor_SMD:R_1206_3216Metric | C5, C6, C7, C8, C9, C10 |
| 5 | 22k | Resistor_SMD:R_1206_3216Metric | R4, R15, R17, R26, R28 |
| 4 | 1mf | Resistor_SMD:R_1206_3216Metric | C1, C2, C3, C4 |
| 4 | 3k3 | Resistor_SMD:R_1206_3216Metric | R10, R23, R33, R36 |
| 4 | 6k8 | Resistor_SMD:R_1206_3216Metric | R6, R11, R24, R34 |
| 3 | 10uG | Inductor_SMD:L_1206_3216Metric | L1, L2, L3 |
| 3 | MCP602 | Package_SO:SO-8_5.3x6.2mm_P1.27mm | U1, U2, U9 |
| 2 | 100k* | Resistor_SMD:R_1206_3216Metric | R22, R22b1 |
| 2 | 31R | Resistor_SMD:R_1206_3216Metric | R18, R19 |
| 1 | 0.01R | Resistor_SMD:R_2512_6332Metric | R29 |
| 1 | 0.1K | Resistor_SMD:R_1206_3216Metric | R27 |
| 1 | 10 | Resistor_SMD:R_1206_3216Metric | R5 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric | R9 |
| 1 | 1K | Resistor_SMD:R_1206_3216Metric | R25 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric | R30 |
| 1 | 1k* | Resistor_SMD:R_1206_3216Metric | R31 |
| 1 | 240R | Resistor_SMD:R_1206_3216Metric | R16 |
| 1 | 47k | Resistor_SMD:R_1206_3216Metric | R32 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | BluePill_1 | Module:YAAJ_BluePill | BP1 |
| 1 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | IR4427 | Package_SO:SO-8_5.3x6.2mm_P1.27mm | U8 |
| 1 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U3 |
| 1 | LM1117-2.5 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U10 |
| 1 | LR7843 | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | lm2596-hw-411 | DCDC:lm2596-hw-411 | U4 |
More from Alex2269/stm32_tft_spi
6- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

Similar boards
- 4 layers100 × 80 mm

- 2 layers13.2 × 10.7 mm

Zerophone audio buffer
libresmartphone/libresmartphone
This page contains the software used in the open hardware smartphone (libresmartphone)
7 parts33 - 2 layers129 × 66 mm

DC22-PCB1
Le-Dome-RDS/hope-bike
An open source Pedalling Assistant Sytem for 26" wheeled bikes
92 parts8 - 2 layers103 × 67.8 mm

- 2 layers113 × 67.8 mm

- 2 layers81.7 × 45.8 mm

- 2 layers89.3 × 55 mm

- 2 layers248.5 × 36 mm

Questions
What parts does the Bord λ principial use?
73 parts, built around the MCP602-I/P, IR4427PBF, AMS1117-3.3 and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bord λ principial KiCad files?
From the Alex2269/stm32_tft_spi repository on GitHub, at the commit this page was made from: the board is stm32f103-LL-ST7735-oxy/doc/board-kicad/bord_λ_principial-x2/bord_λ_principial.kicad_pcb and its schematic stm32f103-LL-ILI9488-spi-oxygen/doc/bord_λ_principial-v2/bord_λ_principial.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bord λ principial design in my own project?
Its repository states no licence, so its author keeps all rights: ask Alex2269 before reusing the design.